- Enterasys Security Router User's Guide

ISDN Configuration
11-12 Configuring Integrated Services Digital Network
XSR(config)#interface dialer 1
XSR(config-if<D1>)#ip address 2.2.2.2 255.255.255.0
XSR(config-if<D0>)#encapsulation ppp
XSR(config-if<D0>)#ppp multilink
XSR(config-if<D0>)#dialer map ip 192.168.1.10 name HOME 212555756
XSR(config-if<D0>)#dialer pool M
XSR(config-if<D0>)#dialer-group 10
XSR(config-if<D0>)#no shutdown
XSR(config)#interface bri 1/0
XSR(config-if<BRI-1/0>)#isdn switch-type basic-ni1
XSR(config-if<BRI-1/0>)#isdn spid1 0555100001 5551000
XSR(config-if<BRI-1/0>)#isdn spid2 0555300001 5553000
XSR(config-if<BRI-1/0>)#dialer pool-member 1 priority 100
XSR(config-if<BRI-1/0>)#no shutdown
XSR(config)#interface bri 1/1
XSR(config-if<BRI-1/1>)#isdn switch-type basic-ni1
XSR(config-if<BRI-1/1>)#isdn spid1 0555200001 5552000
XSR(config-if<BRI-1/1>)#isdn spid2 0555400001 5554000
XSR(config-if<BRI-1/1>)#dialer pool-member 1 priority 90
XSR(config-if<BRI-1/1>)#no shutdown
XSR(config)#interface bri 1/2
XSR(config-if<BRI-1/2>)#isdn switch-type basic-ni1
XSR(config-if<BRI-1/2>)#isdn spid1 0555500001 5555000
XSR(config-if<BRI-1/2>)#isdn spid2 0555700001 5557000
XSR(config-if<BRI-1/2>)#dialer pool-member 1 priority 80
XSR(config-if<BRI-1/2>)#no shutdown
For further explanation and more examples of Dialer interface and Multilink PPP configuration,
refer to “Configuring Dialer Services” on page 10-1 and “Configuring PPP” on page 8-1.
PRI Configuration Model
Figure 11-2, shown below, configures Dialer and Serial interfaces on the XSR’s PRI NIM card (XSR
1800/3000 Series only) as well as describes how those interfaces correlate to dialer and access lists,
map classes, dialer pools, and channel groups