- Enterasys Security Router User's Guide

QoS on VPN
12-20 Configuring Quality of Service
Figure 12-6 QoS on a Virtual Interface Example
The following commands configure Ser and Vpn policy maps on the XSR Remote 1 as shown in
Figure 12-7. XSR Central configuration is not described.
Configure the QoS Class Maps RTP and FTP matched to ACLs 110 and 15:
XSR(config)#class-map RTP
XSR(config-cmap<RTP)#match access-group 110
XSR(config-cmap<RTP)#exit
XSR(config)#class-map FTP
XSR(config-cmap<FTP)#match access-group 115
XSR(config-cmap<FTP)#exit
XSR(config)#class-map RTP1
XSR(config-cmap<RTP1)#match ip dscp 46
XSR(config-cmap<RTP1)#exit
XSR(config)#class-map FTP1
XSR(config-cmap<FTP1)#match ip dscp 18
Configure the input policy map Vpn classes RTP and FTP:
XSR(config)#policy-map Vpn
XSR(config-pmap-VPN>)#class RTP
XSR(config-pmap-c<RTP>)#set ip dscp 46
XSR(config-pmap-c<RTP>)#police 100000
XSR(config-pmap-c<RTP>)#class FTP
XSR(config-pmap-c<RTP>)#set ip dscp 18
XSR(config-pmap-c<RTP>)#class class-default
XSR(config-pmap-c<RTP>)#set ip dscp 8
Configure the output policy map Ser classes RTP1 and FTP1: