User's Guide Hub/Switch 2E253, 2H252, 2H253, 2H258

Static VLAN Egress Configuration Screen
7-12 802.1Q VLAN Configuration Menu Screens
Field Descriptions
Refer to Table 7-3 for a functional description of each screen field.
Table 7-3 Static VLAN Egress Configuration Screen Field Descriptions
Use this field… To…
VLAN ID
(Read-Only)
See the VLAN ID of the VLAN selected in the Static VLAN
Configuration screen.
FDB ID
(Read-Only)
See the Filter Database ID (FDB ID) number associated with the
VLAN ID.
VLAN Name
(Read-Only)
See the VLAN Name associated with the VLAN ID.
Port
(Read-Only)
See a list of ports associated with the VLAN ID. Up to 32 ports may be
listed on the screen. If more than 32 ports are associated with a
VLAN ID, the NEXT command is displayed to step to the next screen.
Egress
(Selectable)
Select the type of VLAN frame transmission (egress) for each port.
You can select UNTAGGED, TAGGED or NO using the SPACE bar.
UNTAGGED – the port will only transmit the VLAN frames as
untagged.
TAGGED – the port will only transmit the VLAN frames as tagged.
NO – the port is removed from the VLAN Egress List, so that the port
will not transmit the VLAN frames.
If NO appears without brackets and not in bold type, the port setting
cannot be changed directly using this screen, but has virtual ports such
as that of a physical ATM port (i.e., an ATM physical port can have
more than one virtual port, which can be configured using its own local
management).
Initially, the default setting is UNTAGGED.
When a new VLAN is created, the default setting is NO on all ports.
SET ALL PORTS
(Selectable)
Set all ports to the same setting. You can select UNTAGGED,
TAGGED, or NO, using the SPACE bar.
The default setting is UNTAGGED.