User's Guide Hub/Switch 2E253, 2H252, 2H253, 2H258

Protocol Port Configuration Screen
8-34 802.1p Configuration Menu Screens
8.7.1 Assigning Ports to a PID/Classification
To assign one or more ports, or all ports simultaneously, to a PID/Classification (Classification
Rule), proceed as follows:
Assigning One or More Ports Individually
1. Use the arrow keys to highlight the Classify field adjacent to the Port number.
2. Press the SPACE bar to toggle the Classify field to either NO or YES. YES associates the port
to the priority shown in the Classification Rule field.
3. If more than one port is being set, repeat the first two steps for each port.
4. Use the arrow keys to highlight the SAVE command at the bottom of the screen.
5. Press ENTER. The message “SAVED OK” displays and the settings are saved.
Assigning All Ports Simultaneously
1. Use the arrow keys to highlight the SET ALL PORTS command field.
2. Press the SPACE bar to toggle the SET ALL PORTS field to YES or NO and press ENTER.
This setting determines whether or not all the ports are set to the PID/Classification shown in the
Classification Rule field.
3. Use the arrow keys to highlight the SAVE command at the bottom of the screen.
4. Press ENTER. The message “SAVED OK” displays and the setting is saved.