Service manual

L9C Monitor
L9C service manual Page 26of 48
-Techview Confidential -
Auto Configuration
Mode Information
 No Signal
When user press the select/Auto key
under none OSD status will trigger this
dialog appear and perform Auto
Configuration procedure.
When Display timing changed this dialog
will appear about 3 seconds. And this
feature only enable when “Information”
indicate On in OSD’s other page of main
menu.
When user does not support the video signal
from the cable this dialog will appear about
10 seconds. And then enter the Sleep mode.
One special case was in factory mode, the
display time length will become 5 seconds fo
r
testing the power consumer.