Service manual

L9C Monitor
L9C service manual Page 31of 48
-Techview Confidential -
 Factory2 Adjustment
This page only visible in factory mode
AUTO BURN :
Use the chip set internal pattern for hot running monitor
panel and inverter.
AUTO COLOR :
Perform Auto Balance measurement .
AUTO COLOR 1 :
Perform Auto Balance measurement by chip set internal
signal. And reference these values to initial all other
color temperature detail parameters.
COLOR UPDATE :
Force presently R,G,B offset and gain parameters
update to currently temperature memory address.
FACTORY RESET :
Recall to factory setting and power off immediately.
VERSION :
Display F/W version.