Operator's Manual

2.1.4 Electronic Features

All electronic controls are via pushbutton switches located on the left side of the unit housing

as shown in Fig. 4. To ensure proper operation of the pushbutton switches, press firmly on the

center of the switch.

1. ON/ Auto Battery Check

Pressing the Up or Down Arrow pushbutton switches will turn the sight ON at Level 12. See

item 4 under this section for a description of Auto shutdown. The sight will automatically perform

a battery check every time it is turned on. The reticle will blink when the batteries have between

2.5 and 5 hours of useful life left.

2. OFF

To turn the sight off, simultaneously press both the UP and DOWN arrows. Verify that the sight

is on/off by looking through the heads-up display window for the reticle.

3. Brightness Adjustment

Pushbutton switches vary the brightness intensity of the holographic reticle pattern. Pressing

the UP arrow or DOWN arrow switch will change the brightness level up or down. There are

twenty (20) daytime brightness settings provided to allow the user to adjust the reticle bright-

ness to their preference.