Operator's Manual

CAUTION
• Never disassemble the sight’s optical assembly. The optical cavity is purged, nitro-
gen filled, and sealed to achieve fog resistant performance. Disassembly will void
the warranty and render the sight inoperable.
• When using a Night Vision compatible HWS in tandem with an NV device, always
check to make sure the sight is off before pressing the NV button to turn on the sight
in the Night Vision mode. Otherwise, it will toggle to the Normal mode and saturate
the image intensifier.
• When a sudden increase in resistance is felt in the elevation or windage adjustment
shafts, the end of the adjustment range has been reached. DO NOT TURN THE
ADJUSTMENTS ANY FARTHER OR SERIOUS DAMAGE MAY OCCUR TO THE
SIGHT.
• Never clean the glass surface with a dry cloth or paper towel; always dampen the
glass surfaces prior to cleaning.
• All moving parts of the sight are permanently lubricated with the exception of the
quick release lever. If audible sounds are generated when opening/closing lever, add
a drop of lubricant to lever assembly. Do not try to lubricate any other moving part.