Inductors RF chokes, SBC series Series/Type: B82141A, B82141B Date: March 2008 Data Sheet EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
RF chokes B82141A, B82141B SBC series, 3.0 × 6.
RF chokes B82141A, B82141B SBC series, 3.0 × 6.8 (mm) Dimensional drawings B82141A (axial leads, taped) Dimensions in mm 6.8 max. (IEC 60294) 3.5 min. 6±0.5 5±0.25 5±0.25 ø3 max. ø0.6 max. 65±1 53±2 9.8 max. lacquered Minimum lead spacing 10 mm IND0428-3-E 1.3 max. 2 max. 1.3 max. insulated Thickness of tape 0.7±0.2 _ 0.5 9 +0.75 6 min. _ 0.5 18 +1 0.5 max. 9.8 max. lacquered 0.6 max. 16±0.5 2 max. 29 max. ø3 max. 6.8 max. (IEC 60294) B82141B (central radial leads, taped) _ 0.
RF chokes B82141A, B82141B SBC series, 3.0 × 6.
RF chokes B82141A, B82141B SBC series, 3.0 × 6.8 (mm) Characteristics and ordering codes fQ IR Rmax fres, min MHz mA Ω MHz Ordering code 2) (reel packing) 3) 40 7.96 725 0.19 180 B82141+1102K000 1.2 40 7.96 700 0.20 160 B82141+1122K000 1.5 40 7.96 670 0.22 155 B82141+1152K000 1.8 45 7.96 660 0.23 145 B82141+1182K000 2.2 45 7.96 630 0.25 130 B82141+1222K000 2.7 45 7.96 610 0.27 110 B82141+1272K000 3.3 50 7.96 580 0.30 90 B82141+1332K000 3.9 50 7.
RF chokes B82141A, B82141B SBC series, 3.0 × 6.8 (mm) Characteristics and ordering codes Tolerance1) fQ IR Rmax fres, min MHz mA Ω MHz Ordering code 2) (reel packing)3) 55 2.52 200 2.40 7.7 B82141+1473J000 56 55 2.52 195 2.60 6.8 B82141+1563J000 68 55 2.52 185 2.90 5.7 B82141+1683J000 82 55 2.52 175 3.20 5.5 B82141+1823J000 100 60 0.796 170 3.50 5.3 B82141+1104J000 120 60 0.796 160 3.80 5.0 B82141+1124J000 150 60 0.796 150 4.30 4.
RF chokes B82141A, B82141B SBC series, 3.0 × 6.
Cautions and warnings ■ Please note the recommendations in our Inductors data book (latest edition) and in the data sheets. – Particular attention should be paid to the derating curves given there. – The soldering conditions should also be observed. Temperatures quoted in relation to wave soldering refer to the pin, not the housing.
Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned.
