Datasheet

5 12/12
Please read Cautions and warnings and
Important notes at the end of this document.
Characteristics and ordering codes
Intermediate values and closer tolerances on request.
Higher currents possible at temperatures <T
R
on request.
Sample kit available. Ordering code: B82422X002
For more information refer to chapter “Sample kits".
1) Replace the + by the code letter for the required inductance tolerance.
For reel size  330 mm the last digit has to be an »8«. Example: B82422H1102M008
2) For Ni-barrier-plated terminals replace the last two digits “00” by “50” (reel 180 mm) or “58” (reel 330 mm).
L
R
PH
Tolerance f
L
MHz
Q
min
f
Q
MHz
I
R
mA
R
max
:
f
res,min
MHz
Ordering code
1)2)
( 180-mm reel)
1.0 r5% J
r10% K
7.96 10 2.52 1150 0.10 150 B82422H1102+000
1.5 7.96 10 2.52 900 0.14 110 B82422H1152+000
2.2 7.96 10 2.52 800 0.16 90 B82422H1222+000
3.3 7.96 10 2.52 770 0.18 70 B82422H1332+000
4.7 7.96 10 2.52 700 0.25 46 B82422H1472+000
6.8 7.96 10 2.52 570 0.35 35 B82422H1682+000
10 2.52 12 2.52 500 0.46 30 B82422H1103+000
15 2.52 12 2.52 390 0.72 26 B82422H1153+000
22 2.52 12 2.52 330 1.0 21 B82422H1223+000
33 2.52 15 2.52 280 1.4 15 B82422H1333+000
47 2.52 15 2.52 230 2.1 12 B82422H1473+000
68 2.52 15 2.52 180 3.4 10 B82422H1683+000
100 0.796 20 0.796 150 4.8 8.0 B82422H1104+000
150 0.796 20 0.796 120 7.5 6.0 B82422H1154+000
220 0.796 20 0.796 100 10.9 5.5 B82422H1224+000
330 0.796 20 0.796 90 13.0 4.5 B82422H1334+000
470 0.796 20 0.796 76 20.0 3.5 B82422H1474+000
680 0.796 20 0.796 61 31.0 3.0 B82422H1684+000
^
^
B82422HSMT inductors, SIMID series
SIMID 1210-H