Specifications

Introduction EP-BX6
Page 1-6
I/O Shield Connector
The EP-BX6 is equipped with an I/O back panel. Please use the appropriate I/O
shield (figure 3).
ATX
POWER SUPPLY
Power-On/Off (Remote)
The EP-BX6 has a single 20-pin connector for ATX power supplies. For ATX
power supplies that support the Remote On/Off feature, this should be connected
to the systems front panel for system Power On/Off button. The systems power
On/Off button should be a momentary button that is normally open.
The EP-BX6 has been designed with “Soft Off" functions. You can turn Off the
system from one of two sources: The first is the front panel Power On/Off the
button, and the other is the "Soft Off" function (coming from the EP-BX6’s
onboard circuit controller) that can be controlled by the operating system.
Windows 95/98 will control this when the user clicks that they are ready to
Shutdown the system.
Figure 4: Case (chassis) Power ON/OFF button
Figure 3: I/O back panel layout
J3
PS/2 Mouse
PS/2 Keyboard
Parallel Port
COM1USB
COM2
(J3: PW-ON)