Specifications

Installation EP-BX6
Page 3-4
Note: Based on the implementation of the Intel 440BX AGPset, the EP-BX6
is able to provide multiple front side bus (FSB) frequencies for Slot 1
processors and memory operations. The mainboard's FSB is easily se-
lected by BIOS Setup listed above to match the FSB required by your
processor. When using the 100MHz FSB (or higher) you must use
PC100 (or better) compliant SDRAM.
Memory is an important component of any motherboard. When
selecting memory for use on the EPoX brand motherboard we
recommend use only the finest quality modules. EPoX would like to
stress that using non-compliant PC100 SDRAM modules with a
100MHz (or higher) FSB severely compromises the integrity of the
system.
epyTUPCkcolClanretxEoitaR
epyT1tolS
IImuitneP
IIImuitneP
noreleC
draCtrevnoC+073S
66
ro
001
0.2
5.2
0.3
5.3
0.4
5.4
0.5
5.5
0.6
5.6
0.7
5.7
0.8
JP1 = 1-2 - Normal (Default)
= 2-3 - Clear CMOS (momentarily)
JP2 CMOS Clear
1
JP1 = 1-2 - Normal (Default)
= 2-3 - Clear CMOS (momentarily)
JP1 Chassis (Case) intruder detect
1
JP4 Keyboard Power-ON function
JP4 = 1-2 - Enabled
= 2-3 - Disabled (Default)
1