Specifications

ManualsBrandsEPOX ManualsComputer equipmentEP-BX6

BIOS

EP-BX6

Page 4-3

NOTE: If the hard disk Primary Master/Slave and Secondary Master/Slave

are set to Auto, then the hard disk size and model will be auto-

detected.

NOTE: The “Halt On:” field is used to determine when to halt the system

by the BIOS if an error occurs.

NOTE: Floppy 3 Mode support is a mode used to support a special 3.5”

drive used in Japan. This is a 3.5” disk that stores only 1.2 MB,

the default setting for this is disabled.

4-2 BIOS Features Setup

Selecting the “BIOS FEATURES SETUP” option in the CMOS SETUP UTILITY

menu allows users to change system related parameters in the displayed menu.

This menu shows all of the manufacturer’s default values for the EP-BX6.

Pressing the [F1] key will display a help message for the selected item.

Figure 3: BIOS Features Setup

Virus Warning: During and after the system boots up, any attempt to write to the

boot sector or partition table of the hard disk drive will halt the system and an

error message will appear.

ROM PCI/ISA BIOS(2A69KPAI)

BIOS FEATURES SETUP

AWARD SOFTWARE, INC.

Virus Warning : Disabled

CPU Internal Cache : Enabled

External Cache : Enabled

CPU L2 Cache ECC Checking : Disabled

Processor Number Feature : Enabled

Quick Power On Self Test : Enabled

Boot Sequence : A, C, SCSI

Boot Up Floppy Seek : Enabled

Boot Up NumLock Status : On

Gate A20 option : Fast

Typematic Rate Setting : Disabled

Typematic Rate (Chars/Sec) : 6

Type matic Delay (Msec) : 250

Security Option : Setup

PCI/VGA Palette Snoop : Disabled

OS Select For DRAM > 64MB : Non-OS2

Report NO FDD For WIN 95 : Yes

Esc : Quit : Select Item

F1 : Help PU/PD/+/- : Modify

F5 : Old Values (Shift) F2 : Color

F7 : Load Setup Defaults

éé

êê

èè

çç