Specifications

EPSON EPL-N1600 Chapter 4 Disassembly and Assembly
Rev. A 4-123
4.3.14 Chute Exchange
1. Remove the Cover Side,E. (Section 4.2.1)
2. Remove the Control Assembly Panel (E). (Section 4.2.3)
3. Remove the Cover Assembly MBF.E.(Section 4.2.4)
4. Remove the Tray Assembly MBF.E.(Section 4.2.5)
5. Remove the Cover Assembly,E. (Section 4.3)
6. Remove the Roll Assembly Exit Out.(Section 4.3.27)
7. Remove the Fuser Assembly.(Section 4.3.31)
8. Squeeze to
g
ether the latch tabs of the left (ri
g
ht side of the printer)
Cap Chute Exchan
g
e and press the latch tabs out of the hole in the
Frame, and hold the Chute Exchan
g
e in the position.
9. Squeeze to
g
ether the latch tabs of the ri
g
ht (left side of the printer)
Cap Chute Exchan
g
e and carefully pull the Chute Exchan
g
e away
from the Frame, to
g
ether with the Caps Chute Exchan
g
e.
Figure 4-20. “Chute Exchange” Removal
CHECK
PO INT
Correctly direct the latch tabs of CAP CHUTE
EXCHANGE to a hole of the frame by viewing through
the gaps.