Operation Guide

Checking Items and Checking Times
105
Checking Items and Checking Times
Checking Items List
See the following table for items that need to be checked and cleaned.
Checking
Time
Check Part Operation Contents See the Following
Daily (after
work)
Printing Mount and Ink
Absorber
Visually check that no paper particles or ink
are stuck to the parts. Wipe away any dirt with
a damp cloth or cotton swab.
U “Printing Mount” on page
106
U “Ink Absorber” on page
106
When
using the
Top tray
Top tray Visually check that there is no dust or any
foreign objects on the Top tray. Wipe off any
dirt with a soft cloth.
U “Top Tray” on page 107
Once a
month
(after
work)
Roll Paper Feeder Visually check that no dust and so on has
accumulated. Wipe off any dirt with a soft
cloth.
U “Roll Paper Feeder” on
page 107
Paper Feed Path After
Printing
Visually check that no paper particles are
stuck to the prints. If you do notice any paper
particles, use a vacuum cleaner to clean the
paper feed path.
U “Paper Feed Path After
Printing” on page 108
Once every
six months
(after
work)
Feed Roller on Paper Feed
Side
Visually check that no paper particles are
stuck to the prints. If you do notice any paper
particles, clean the roller with a Cleaning
Sheet.
U “Checking Once Every Six
Months” on page 112
Paper width guide Wipe off any paper powder that is stuck to the
rear of the paper width guide on the
right-hand side of the rear roll paper feeder.