Operation Guide

Checking Items and Checking Times
108
Paper Feed Path After Printing
Visually check that no paper particles are stuck to the prints. If you do notice any paper particles, use a vacuum
cleaner to clean the paper feed path.
A
Slide out while slightly lifting the handle of the waste paper box.
The back printing unit is installed behind the waste paper box.
B
Grip the handle on the back printing unit, and pull it down and out.
C
Open the top cover, raise the heater unit's lever, and release the lock.
c
Caution:
Do not touch the heater unit immediately after printing. Because the heater reaches high temperatures, burns
could occur.