Operation Guide

Introduction
14
Heater unit/Print Head Unit
Spindle unit
G Humidity control unit
Adjusts the humidity in the roll paper feeder. Turn over to switch between dehumidification and humidification. When the
white side is facing out in the roll paper feeder, dehumidification is performed. When the black side is facing out,
humidification is performed.
U “Adjusting the Humidity in the Roll Paper Feeder” on page 80
H Humidity control unit cover
Open when installing the humidity control unit in the front roll paper feeder, or when switching between dehumidification
and humidification.
U “Changing Between Dehumidification and Humidification” on page 81
A Heater unit
Dries the paper after printing. If a paper jam occurs, remove to check inside the printer.
B Print Head Unit
Fires ink while moving left and right to print. Do not move the Print Head Unit by hand.