Operation Guide

Appendix
150
EMC FCC part 15 subpart B class A
CAN/CSA-CEI/IEC CISPR 22 Class A
AS/NZS CISPR 22 Class A
EMC Directive 2004/108/EC EN 55022 Class A
EN 55024
EN 61000-3-2
EN 61000-3-3
w
Warning:
This is a class A product. In a domestic environment this product may cause radio interference in which case the user
may be required to take adequate measures.
Ink Specifications
Type Ink Cartridges
Ink type Water-based ink
Use by date Three years from date of production
Print quality guarantee
expiry
Six months from installation
Storage temperature In packaging: −4 to 104 °F (−20 to 40 °C); 1 month at 104 °F (40 °C)
Installed: −4 to 104 °F (−20 to 40 °C); 1 month at 104 °F (40 °C)
Transporting: −4 to 140 °F (−20 to 60 °C); 1 month at 104 °F (40 °C), and 72 hours at 140 °F (60 °C)
Capacity 700 ml
Cartridge dimensions
(W x D x H)
1.6 x 12.6 x 4.2 inches (40 x 320 x 107 mm)
Note:
O The ink freezes if left at below 5°F (-15°C) for a long time. If it does freeze, leave it at room temperature (77 °F
[25 °C]) for at least four hours (without condensation).
O Do not disassemble or refill the ink cartridge.
Maintenance Tank Specifications
Type Maintenance tank for waste ink
Number installed 1
Environmental
Conditions
In packaging: −4 to 104 °F (−20 to 40 °C) temperature, 20 to 85% humidity
Installed: Follows general specifications
Transporting: −4 to 140 °F (−20 to 60 °C) temperature, 5 to 85% humidity; 1 month at 104 °F
(40 °C), and 120 hours at 140 °F (60 °C)
Cartridge dimensions
(W x D x H)
4 x 9.3 x 3.1 inches (102.5 x 235 x 79.5 mm)
Safety and Approvals