Operation Guide

Introduction
19
Notes on Installation
Do not block the products airflow vents.
If the airflow vents are blocked, the internal temperature rises and could cause a fire.
Do not set it up in a location in which it could be covered by a cloth and so on, or in an area with poor
ventilation.
Also, be sure to secure the installation space indicated in the manual.
U “External Dimensions and Necessary Space” on page 152
Do not install or store it in an unstable location, or in a location where it is subject to vibrations from other
equipment.
If it falls or slips, it could cause an injury.
Do not place it in smoky or dusty locations, humid locations, or locations where it is likely to get wet.
Electric shock or fire could occur.
Because the product is heavy, it should not be carried by one person.
When unpacking or moving the product, make sure it is carried by at least three people.
See the following for more information on the product's mass.
U “Printer Specifications” on page 149
Do not move this printer by using the Front roll handle.
When lifting the product, place your hands in the locations indicated in the manual, and then lift.
If you lift the product with your hands placed in other areas, your fingers could be trapped if you drop the
product or when the product is lowered, which could cause an injury.
If this product is placed in a stand with casters (wheels), make sure the casters are locked in place and cannot
move before performing operations.
If the stand moves unexpectedly during operations, it could cause an injury.