Operation Guide

Introduction
20
Notes on Handling
Do not use near volatile substances such as alcohol or thinner, and do not use near fires.
Electric shock or fire could occur.
Do not use the product in an abnormal condition, such as if it is emitting smoke or if you notice any strange
odors or noises.
Electric shock or fire could occur.
If an abnormality does occur, turn off the power immediately, disconnect the plug from the electrical outlet,
and then contact a technical representative.
Do not use this product if foreign bodies, water, or other liquids have entered the product.
Electric shock or fire could occur.
Turn off the power immediately, disconnect the plug from the electrical outlet, and then contact a technical
representative.
Only perform operations as instructed in the manual.
Performing repairs is dangerous. Never perform repairs yourself.
Do not use it in locations that may have inflammable or explosive gas and so on in the atmosphere. Also, do not
use sprays containing inflammable gas inside or around this product.
A fire could ignite.
Do not perform any wiring operations other than instructed in the manual.
A fire could ignite. Also, equipment connected to the product could be damaged.
Do not touch any parts of the product, except as instructed in the manual.
Electric shock, burns or injury could occur.
Do not drop any metallic or flammable objects into this product through the openings.
Electric shock or fire could occur.
Do not place any heavy objects on this product.
If it falls or breaks, it could cause an injury.
When moving this product, check that the power is off, the plug is disconnected from the electrical outlet, and
all wiring has been disconnected before moving.
If the cable is damaged, electric shock or fire could occur.
When turning on the product or while printing, do not put your fingers near the paper eject roller section.
If your fingers are caught in the paper eject roller, an injury could occur. Remove paper after it has been
completely ejected from the product.