Operation Guide

Introduction
21
Notes on the Power Supply
If you need to open the printer's top cover while in use, do not touch the heater or the cover which are indicated
by warning labels. Because internal parts reach high temperatures, burns could occur.
When opening and closing the printer cover, do not place your hands near the section where the cover joins
with the main body of the printer.
If your fingers or hands are too close to this section, an injury could occur.
Use only the type of the power supply indicated on the label.
Electric shock or fire could occur.
Do not use the power plug if there are any foreign bodies, such as dust, attached.
Electric shock or fire could occur.
Make sure the power plug is inserted all the way into the electrical outlet before use.
Electric shock or fire could occur.
Only use the product with the power cable supplied. Also, do not use the power cable supplied with any other
equipment.
Electric shock or fire could occur.
Do not use the power cable if it is damaged.
Electric shock or fire could occur.
Contact a technical representative if the power cable is damaged.
Furthermore, observe the following points to prevent the power cable from being damaged.
O Do not modify the power cable
O Do not put any heavy objects on the power cable
O Do not bend too far, twist, or pull the power cable
O Do not place the power cable near a heater