Operation Guide

Introduction
8
When the front roll paper feeder is raised
J Lock Release button (only for the Dual Roll Model)
Press the Lock Release button while holding down the handle on the front roll paper feeder slightly to release the lock. You
can then raise the front roll paper feeder.
K Air Intake
Takes air into the printer. Do not allow anything to block this intake vent.
L Maintenance Tank Cover
Open when replacing the maintenance tank.
M Rear roll cover
Open when loading and removing paper.
N Rear roll lever
Pull forward to open the rear roll cover.
O Maintenance Tank
Tank for collecting waste ink.
U “Replacing the Maintenance Tank” on page 68