Administrator's Guide

Settings/Maintenance
18
Available functions on the Settings/Maintenance screen:
Large Items Medium Items Small Items Setting Contents
System Operation
Settings/Inspectio
ns (01)
Installation
Information
Settings (011)
- Displays the printer's information.
U “Installation Information Settings” on page 20
Settings for
Optional
Equipment (012)
- Change the settings for the optional equipment.
U “Settings for Optional Equipment” on page 21
Printer Operation
Settings (013)
- Make settings for power saving and the warning buzzer.
U “Printer Operation Settings” on page 23
Print Condition
Settings/Inspectio
ns (02)
Image Quality
Settings (021)
- Select the image quality mode.
U “Image Quality Settings” on page 24
Paper Settings
(022)
- Check information about the loaded paper.
U “Paper Settings” on page 25
CR Unit
Adjustment/Maint
enance (03)
Head Cleaning
(031)
Auto Cleaning
(0311)
Detect clogged nozzles and clean the Print Head Unit
automatically.
U “Auto Cleaning” on page 29
Nozzle Check
(0312)
Check for clogged nozzles and clean the Print Head Unit
manually.
U “Nozzle Check” on page 30
Periodic Nozzle
Check Settings
(0313)
Set whether or not to perform auto nozzle check.
U “Periodic Nozzle Check Settings” on page 34
Color Calibration
(034)
Calibration (0341) Perform calibration with a color measurement device.
U “Calibration” on page 37
History of
Correction Values
(0342)
Write the correction value acquired through calibration.
U “History of Correction Values” on page 45
Create Calibration
(0343)
Perform calibration for the standard printer, and then
create the standard value.
U “Create Calibration” on page 46
Gray Adjustment
(035)
- Adjust the Color Balance, Density, and Gradation.
U “Gray Adjustment” on page 50
Head Maintenance
(036)
Clean the print head unit and the wipers for the print
head.
To perform this type of cleaning, you need the optional
Print Head Maintenance Kit (C12C890991).
For more details, see the User's Guide supplied with the
Print Head Maintenance Kit.