Administrator's Guide

Settings/Maintenance

Settings for Optional Equipment

Click Settings for Optional Equipment (012) from System Operation Settings/Inspections (01) to display the

screen. Make settings for optional equipment that has been installed.

After changing settings, click Apply to apply the changes.

Item Explanation

Back Printing Unit Attached/Not

Attached

Displays the installation status for the back printing unit.

Print Density

Control

(Head 1/Head 2)

Adjust the print density for the back printing unit heads in seven levels.

This can be set when the back printing unit is Attached.

Select Roll Paper Select the roll paper feeder you want to use for the test print.

This can be selected when the back printing unit is Attached and paper is

loaded.

Paper Surface Type Displays the Paper Surface Type of the paper loaded in the roll paper

feeder.

"-" is displayed when roll paper is not loaded.

Test Print Click to perform a test print.

This can be performed when the back printing unit is Attached and the

roll paper feeder is selected.

This cannot be performed when the Paper Surface Type does not

support back printing.