Administrator's Guide

Settings/Maintenance
22
Sorter/Long Paper
Ejection Unit
Attached/Not
Attached
Displays the installation status for the Sorter/Long Paper Ejection Unit.
Sorter Select Enabled or Disabled for the sorter.
This can be set when the Sorter/Long Paper Ejection Unit is Attached.
When changing from Disabled to Enabled, you need to restart the
printer.
Humidity Control Unit Attached/Not
Attached
Displays the installation status for the humidity control unit.
Set by service personnel.
Back Click to close the Settings/Maintenance screen.
Help Click to display the Help.
Date of Adjustment Displays the time when Print Density Control was last performed.
You can check the changed date settings for each Paper Surface Type.
Apply Click to apply any changed settings.
Tip:
O Only the Dual Roll Model supports front roll paper. For the Single Roll Model, information is not displayed under the
front paper item. See the information for rear roll paper.
Item Explanation