Administrator's Guide

Settings/Maintenance

Problems with Gray Adjustment

Symptom Error Messages What to do

The print quality for the

adjustment pattern is too

low.

Is the print head clogged?

Print an adjustment pattern again after performing head

cleaning.

An error occurred while

applying the parameters.

"Try again after closing the

Settings/Maintenance

screen."

"Operation failed."

Are the PC and the printer connected to the spectrometer

correctly?

Check the connection between the PC and the printer, and then

click Apply again.

Is there enough free space on the PC's hard disk?

Make sure there is sufficient free space on the PC's hard disk, and

then click Apply again.

Errors in the adjustments

have been applied. I want

to make adjustments

again.

Initialize and then readjust.

Press Clear for the Color Balance, Density Adjustment, and

Gradation Correction to initialize the settings, and then make

adjustments again.

The adjustment values

have been initialized.

Have adjustment values been initialized after performing

color calibration?

Perform gray adjustment again.