User manual

ManualsBrandsEpson ManualsNetwork RouterP07303

User Manual

Nov. 2009 Revision 0.03

P07303-II Series

Customer Display

Summary of content (42 pages)

PAGE 1
User Manual Nov. 2009 Revision 0.
PAGE 2
Copyright Nov. 2009’ All Rights Reserved Manual Version 0.03 The information contained in this document is subject to change without notice. We make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. We shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
PAGE 3
Safety IMPORTANT SAFETY INSTRUCTIONS 1. To disconnect the machine from the electrial power supply, turn off the power switch and remove the power cord plug from the wall socket. The wall socket must be easily accessible and in close proximity to the machine. 2. Read these instructions carefully. Save these instructions for future reference. 3. Follow all warnings and instructions marked on the product. 4. Do not use this product near water. 5. Do not place this product on an unstable cart,stand,or table.
PAGE 4
LEGISLATION AND WEEE SYMBOL 2002/96/EC Waste Electrical and Electronic Equipment Directive on the treatment, collection, recycling and disposal of electric and electronic devices and their components. The crossed dustbin symbol on the device means that it should not be disposed of with other household wastes at the end of its working life. Instead, the device should be taken to the waste collection centers for activation of the treatment, collection, recycling and disposal procedure.
PAGE 5
P07303-II Series Customer Display User's Manual Revision History Revision Number Description Revision Date 0.01 Initial version 2009/11/3 0.02 Add POS7300 commands that same with EPSON command. 2009/11/4 0.
PAGE 6
P07303-II Series Customer Display User's Manual TABLE OF CONTENTS 1. CHECKLIST .........................................................................................................7 2. FEATURES ..........................................................................................................7 3. SPECIFICATION ..................................................................................................8 4. INTERFACE ....................................................................
PAGE 7
P07303 Series Customer Display User's Manual 1. Checklist G 501 mm 225 mm 191 mm 281 mm 93 mm Pole Display Module Flat Cable (DB-9P to DB-9P Flat Cable Connector) Base Unit Two Pieces of Pole Support (1x22cm, 1x9cm) Installation Guide Power Adapter 2. Features 1. Data can be display on 20 columns x 2 lines. 2. Blue–green color and large character are easy to see. 3. System command set provide stored in non-volatile EEPROM that without the switches 4.
PAGE 8
P07303-II Series Customer Display User's Manual 3. Specification NO Item Description 1 Display method Vacuum fluorescent display 2 Number of character 3 Character font 5 x 7 Dot matrix 4 Display color Blue green 5 Brightness 700 cd /m2 40 characters (20 columns x 2 lines) 96 alphanumeric 6 Character type 25 kinds of international character set 1 user define character 7 Character size 9.0mm x 5.
PAGE 9
P07303-II Series Customer Display User's Manual 4. Interface There are two types of stand-alone VFD Pole Display – One is support “pass-through” and “flow control” function, the other is only support “flow control”. 4.1.
PAGE 10
P07303-II Series Customer Display User's Manual 4.2. Display Base (No pass through function) Figure of VFD Pole Display Base 4.3.
PAGE 11
P07303-II Series Customer Display User's Manual 4.4. Display Base (with pass through function) Figure of VFD Pole Display Base with “pass through” function 4.5. Connector (with pass through function) PWR3 COM1 Connector Definition: Name Connect to PWR3 Printer COM1 Printer RJ45_1 VFD USB1 PC COM2 PC PWR2 PC / Adapter PWR1 Adapter RJ45_1 USB1 COM2 PWR2 PWR1 Function description 24V output connector, provide power to thermal printer. RS-232 connector, connect to printer.
PAGE 12
P07303-II Series Customer Display User's Manual Remark: Handshaking is a confirmable function when signal is transmitted from transmission end to receipt end. A process of advance control signal or character is exchanged transmission during both of device or system to be linked. Hardware flow control is sometimes referred to as RTS / CTS flow control. This term mentions the extra input and outputs used on the serial device to perform this type of handshaking.
PAGE 13
P07303-II Series Customer Display User's Manual USB1: B Type link to to PC/HOST Connector type: B Type USB USB Pin Definition Pin # Definition 1 +5V_VBUS 2 USB_P3 USB_P+ 4 GND 5 GND 6 GND PWR2: +24V Input Connector Type: DC Jack with lock Pin Definition: Pin # 1 2 3 4 Definition +24V GND GND N/C PWR3: +24V Output Connector Type: DC Jack with lock Pin Definition: Pin # 1 2 3 4 Definition +24V GND GND N/C
PAGE 14
P07303-II Series Customer Display User's Manual 5. Software Status Setting Commands When the device is POWER ON, it will read the EEPROM Setting to set the Command Type, Baud Rate, Parity, Data Length, Demo Mode and International Character. User can re-set the Software Status Setting Commands as following, and Status Setting will be saving to EEPROM: 5.1. Baud Rate Setting Command STX 05 B n ETX ASCII Format Dec. Format Hex.
PAGE 15
P07303-II Series Customer Display User's Manual 5.4. International Character Set Setting Command STX 05 S n ETX ASCII Format Dec. Format Hex. Format Description n /Change the international character set/ STX 05 S n ETX [ 02] [ 05] [ 83] n [03] 30h≦n≦4Fh [02h][05h][53h] n [03h] Change the display international character font. Character Set (20h – 7Fh) Code Table (80H-FFH) CP-437 (USA, Standard Europe) 30h U.S.A.
PAGE 16
P07303-II Series Customer Display User's Manual 5.5. Select International Character Set Command STX 05 T n ETX ASCII Format Dec. Format Hex. Format Description /Select International Character Set Command/ STX 05 T n ETX [ 02] [ 05] [ 84] n [03] 00h≦n≦1Fh [02h][05h][54h] n [03h] Select International Character Set Select international character set (20H~7Fh) by command “STX 05 T n ETX” n 00h 01h 02h 03h 04h 05h International character set U.S.A. FRANCE GERMANY U.K.
PAGE 17
P07303-II Series Customer Display User's Manual 5.7. Command Type Setting Command STX 05 C n ETX ASCII Format Dec. Format Hex. Format Description /Change the command type setting/ STX 05 C n ETX [ 02] [ 05] [ 67] n [03] 30h≦ n ≦37h [02h][05h][43h] n [03h] This command will change the command type and initialize the display. The display emulation mode is based on DSP800/ ESC/ ADM 787/ POS7300/ AEDEX/ UTC/ CD5220 mode. n 30h 31h 32h 33h Command Type POS7300 ESC/POS ADM 787 DSP800 n 34h 35h 36h 37h 5.8.
PAGE 18
P07303-II Series Customer Display User's Manual 5.10.
PAGE 19
P07303-II Series Customer Display User's Manual 6.
PAGE 20
P07303-II Series Customer Display User's Manual Command Set POS7300 CD5220 EPSON UTC/S UTC/P AEDEX ADM788 DSP800 D101 Command Clear bottom line and move O cursor to bottom left-end position Set period to upper line, last n O position Set line blinking, upper line O O Clear line blinking, upper line O O Clear field 1 and move cursor to O field 1, first position Clear field 2 and move cursor to O field 2,first position Clear display range from n position to m position and move O cursor to n position Save the
PAGE 21
P07303-II Series Customer Display User's Manual 7. Command Details 7.1. POS7300 Series Command List Command ESC F A [DATA] CR ESC F B [DATA] CR ESC F D [DATA] CR ESC F O [DATA] CR Code (hex) 1B 46 41 [DATA] 0D 1B 46 42 [DATA] 0D 1B 46 44 [DATA] 0D 1B 46 4F [DATA] 0D ESC P x y 1B 50 x y ESC _ n 1B 5F n ESC DC1 ESC DC2 ESC DC3 ESC @ 1B 11 1B 12 1B 13 1B 40 US MD1 n 1F 01 n US MD2 n 1F 02 n US DC1 n 1F 11 n US DC2 n 1F 12 n US # n x 1F 23 n x US , n 1F 2C n US .
PAGE 22
P07303-II Series Customer Display User's Manual Command US U 1F 55 Code (hex) US X n 1F 58 n US r n 1F 72 n NULL H NULL K NULL M NULL P NULL G NULL O BS HT LF HOM US B CLR CLR CR CAN 0 48 0 4B 0 4D 0 50 0 47 0 4F 08 09 0A 0B 1F 42 0C 12 0D 18 DLE n 10 n ESC W n s x1 y1 x2 y2 1B 57 n s x1 y1 x2 y2 ESC R n 1B 52 n ESC t n 1B 74 n ESC = n 1B 3D n Function Description Display time continuously Brightness adjustment n=1~ 4 Select/cancel reverse character.
PAGE 23
P07303-II Series Customer Display User's Manual Note: 1. Select international character set (20H~7Fh) by command “ESC R n” n 00h 01h 02h 03h 04h International character set U.S.A. FRANCE GERMANY U.K. DENMARK I n 05h 06h 07h 08h 09h International character set SWEDEN ITALY SPAIN JAPAN NORWAY International character set n 0Ah DENMARK II 0Bh SLAVONIC 0Ch RUSSIA 1Fh User-Define 2.
PAGE 24
P07303-II Series Customer Display User's Manual 7.2.
PAGE 25
P07303-II Series Customer Display User's Manual Command Code (hex) ESC W s x1 x2 y 1B 57 s x1 x2 y CLR CAN ESC * n US X n 0C 18 1B 2A n 1F 58 n ESC _ n 1B 5F n ESC f n 1B 66 n ESC c n 1B 63 n ESC = n 1B 3D n Function Description Set or cancel the window range at horizontal scroll mode 1 ≦ x1 ≦ x2 ≦ 14h, for columns location. y = 1~2, for lines location.
PAGE 26
P07303-II Series Customer Display User's Manual 4. Select character code table (80H-FFH) by command “ESC c n”.
PAGE 27
P07303-II Series Customer Display User's Manual 7.3. UTC Standard Mode Command List Command Code (hex) BS HT LF CR 08 09 0A 0D DLE n 10 n DC1 DC2 DC3 DC4 US ESC d 11 12 13 14 1F 1B 64 Function Description Back space Horizontal tab Line feed Carriage return Display position n = 0 ~ 27h, for location. Over write display mode Vertical scroll mode Cursor on Cursor off Clear display Change to UTC enhanced mode 7.4.
PAGE 28
P07303-II Series Customer Display User's Manual 7.5.
PAGE 29
P07303-II Series Customer Display User's Manual 7.7.
PAGE 30
P07303-II Series Customer Display User's Manual 7.8. EPSON ESC/POS Command List Command Code (hex) US r n 1F 72 n US MD1 US MD2 US MD3 CAN 1F 01 1F 02 1F 03 18 ESC # n 1B 23 n US # n x 1F 23 n x US C n 1F 43 n BS HT US LF LF US CR CR HOM US B 08 09 1F 0A 0A 1F 0D 0D 0B 1F 42 US $ x y 1F 24 x y CLR 0C US E n 1F 45 n ESC @ 1B 40 US , n 1F 2C n US .
PAGE 31
P07303-II Series Customer Display User's Manual Command ESC W n s x1 y1 x2 y2 ESC R n ESC t n ESC = n ESC % n ESC & SOH n m [b1~b5] * K ESC ? ESC s SOH ESC d SOH Code (hex) Function Description Set or cancel the window range n = 1 ~ 4, for window number s = 0: cancel s = 1: set 1B 57 n s x1 y1 x2 y2 1 ≦ x1 ≦ x2 ≦ 14h, for columns location. 1 ≦ y1 ≦ y2 ≦ 2, for lines location. Select international character set (20H~7Fh). 1B 52 n n = 00 ~ 1Fh.
PAGE 32
P07303-II Series Customer Display User's Manual 8. Character Set 8.1. Character Code 20H – 7FH 8.1.
PAGE 33
P07303-II Series Customer Display User's Manual 8.2. Character Code 80H – FFH 8.2.1 80h 90h A0h B0h C0h D0h E0h F0h 8.2.2 80h 90h A0h B0h C0h D0h E0h 8.2.
PAGE 34
P07303-II Series Customer Display User's Manual 8.2.4 80h 90h Katakana for Japan 00h 01h 02h 03h 04h 05h 06h 07h 08h 09h 0Ah 0Bh 0Ch 0Dh 0Eh 0Fh α £ A0h β γ ⊿ є η § IE IR ∫ x 。「」、 ‧ θ Ā λ -1 µ ² π ³ ρ x σ τ Ф Ω ½ 1/ √ ± ∑ ■ B0h C0h D0h E0h F0h 8.2.
PAGE 35
P07303-II Series Customer Display User's Manual 8.2.7 CP-860 (Portuguese) 00h 01h 02h 03h 04h 05h 06h 07h 08h 09h 0Ah 0Bh 0Ch 0Dh 0Eh 0Fh 90h Ç É ü À é È â ô ã õ à ò Á Ú ç ù ê Ì Ê Õ è Ü Í ¢ Ô £ ì Ù Ã Â ₧ Ó A0h á í ó ú ñ Ñ a ¿ ½ ¼ ¡ « » ░ └ ╨ α ≡ ▒ ┴ ╤ β ± ▓ ┬ ╥ Γ ≥ │ ├ ╙ π ≤ ┤ ─ ╘ Σ ⌠ ╡ ┼ ╒ σ ⌡ ╢ ╞ ╓ µ ÷ Ò ╣ ╔ ┘ θ • ¬ B0h o ╖ ╟ ╫ τ ≈ ║ ╩ └ Ω · ╗ ╦ █ δ √ ╝ ╠ ▄ ∞ ╜ ═ ▌ ø ² ╛ ╬ ▐ є ■ ┐ ╧ ▀ ∩ 80h C0h D0h E0h F0h 8.2.
PAGE 36
P07303-II Series Customer Display User's Manual 8.2.10 CP-862 (Hebrew) 00h 01h 02h 03h 04h 05h 06h 07h 08h 09h 0Ah 0Bh 0Ch 0Dh 0Eh 0Fh 80h 90h A0h B0h C0h D0h E0h F0h ‫א‬ ‫נ‬ á ░ └ ╨ α ≡ ‫ב‬ ‫ס‬ í ▒ ┴ ╤ ß ± ‫ג‬ ‫ע‬ ó ▓ ┬ ╥ Γ ≥ ‫ד‬ ‫ף‬ ú │ ├ ╙ π ≤ ‫ה‬ ‫פ‬ ñ ┤ ─ ╘ Σ ⌠ ‫ו‬ ‫ץ‬ Ñ ╡ ┼ ╒ σ ⌡ ‫ז‬ ‫צ‬ ª ╢ ╞ ╓ µ ÷ ‫ח‬ ‫ק‬ º ╖ ╟ ╫ τ ≈ ‫ט‬ ‫ר‬ ¿ ╕ ╚ ╪ Φ ° ‫י‬ ‫ש‬ ⌐ ╣ ╔ ┘ Θ · ‫ך‬ ‫ת‬ ¬ ║ ╩ ┌ Ω · ‫כ‬ ¢ ½ ╗ ╦ █ δ √ ‫ל‬ £ ¼ ╝ ╠ ▄ ∞ ⁿ ‫ם‬ ¥ ¡ ╜ ═ ▌ φ ² ‫מ‬ ₧ « ╛ ╬ ▐ ε ■ ‫ן‬ ƒ » ┐ ╧ ▀ ∩ 8.2.
PAGE 37
P07303-II Series Customer Display User's Manual 8.2.13 CP-866 (Cyrillic) 00h 01h 02h 03h 04h 05h 06h 07h 08h 09h 0Ah 0Bh 0Ch 0Dh 0Eh 0Fh 80h 90h A0h B0h C0h D0h E0h F0h 8.2.
PAGE 38
P07303-II Series Customer Display User's Manual 8.2.
PAGE 39
P07303-II Series Customer Display User's Manual 8.2.
PAGE 40
P07303-II Series Customer Display User's Manual Appendix A - Command Details A.1. Overwrite mode In this mode, the cursor will move towards the right and begin from the upper left position. When the cursor has reached the end of the upper line, the cursor will move down to the bottom left position to continue. When the cursor has reached the end of the bottom line, it will move to up the upper left position and overwrite the previous characters. A.2.
PAGE 41
P07303-II Series Customer Display User's Manual A.8. Move cursor up Move the cursor up one line. When the cursor is on the upper line, this command operates differently depending on the display mode. Overwrite mode: The cursor is moved to the same column the lower line. Vertical scroll mode: The characters displayed on the upper line is scrolled to the lower line, and the upper line is cleared. The cursor will remain at the same position. Horizontal scroll mode: The cursor will remain stationary.
PAGE 42
P07303-II Series Customer Display User's Manual Appendix B - Control Code Set HEX 00H 01H 02H 03H 04H 05H 06H 07H 08H 09H 0AH 0BH 0CH 0DH 0EH 0FH CODE NULL SOH, MD1 STX, MD2 ETX, MD3 EOT, MD4 ENQ, MD5 ACK, MD6 BEL, MD7 BS, MD8 HT LF VT, HOM FF, CLR CR SO, SLE1 SI, SLE2 HEX 10H 11H 12H 13H 14H 15H 16H 17H 18H 19H 1AH 1BH 1CH 1DH 1EH 1FH CODE DLE DC1 DC2 DC3 DC4 NAK SYN ETB CAN EM SUB ESC FS GS RS, SF1 US, SF2