User manual

P07303-II Series Customer Display User's Manual
5.7. Command Type Setting Command
STX 05 C n ETX /Change the command type setting/
ASCII Format STX 05 C n ETX
Dec. Format [02] [05] [67] n [03]
Hex. Format [02h][05h][43h] n [03h]
30h≦ n ≦37h
Description
This command will change the command type and
initialize the display.
The display emulation mode is based on DSP800/ ESC/
ADM 787/ POS7300/ AEDEX/ UTC/ CD5220 mode.
n Command Type n Command Type
30h POS7300 34h AEDEX
31h ESC/POS 35h UTC/P
32h ADM 787 36h UTC/S
33h DSP800 37h CD5220
5.8. Run Demo message
STX 05 D 08 ETX /Run demo message/
ASCII Format STX 05 D 08 ETX
Dec. Format [0 2] [ 0 5] [6 8 ][ 0 8] [ 0 3]
Hex. Format [02h][05h][44h][08h][03h]
Description
Run demo message for the display.
The display emulation mode is based on PA7300,
DSP800, EPSON ESC/POS, CD5220 command type.
5.9. Show Firmware Version
STX 05 V 01 ETX /Show Firmware Version/
ASCII Format STX 05 V 01 ETX
Dec. Format [0 2] [0 5] [ 86 ][ 0 1 ][ 0 3]
Hex. Format [02h][05h][56h][01h][03h]
Description Show firmware version.