User manual

P07303-II Series Customer Display User's Manual
6. Command List Table
Command Set
Command
POS7300 CD5220
EPSON
D101
UTC/S UTC/P AEDEX ADM788 DSP800
Move cursor right O O O
Move cursor left O O O
Move cursor up O O O
Move cursor down O O O
Move cursor to right-most position O O O
Move cursor to left-most position O O O
Move cursor to home position O O O
Move cursor to bottom position O O O
Move cursor to specified position O O O O
Clear display screen O O O O O
Clear cursor line O O O
Brightness adjustment O O O O
Blink display screen O O O O
Initialize display O O O O
Select character code table O O O
Select international character set O O O O
Select/cancel reverse character O O
Overwrite mode O O O O
Vertical scroll mode O O O O
Horizontal scroll mode O O O
Set/cancel the window range O O O
Select peripheral device O O O O
Set starting/ending position of
macro definition
O
Execute and quit macro O
Execute self-test O O O O
Display time O O O O
Display time continuously O O
Display position O O
Cursor on/off O O O O
Change to UTC enhanced mode O
Change to UTC standard mode O
Write string to upper line O O O O
Upper line message continuous
scroll
O O O O
Bottom line message scroll
continuously
O
Message vertical down scroll
continuously
O
Message vertical upper scroll
continuously
O
Carriage return O O O
Line feed O O
Back space O O
Horizontal tab O O
Command type select O O O
Upper line message scroll once
pass
O O
Change attention code O O
Two line display O O
Clear upper line and move cursor
to upper left-end position
O