User manual

P07303-II Series Customer Display User's Manual
Command Code (hex) Function Description
US U 1F 55 Display time continuously
US X n 1F 58 n
Brightness adjustment
 n = 1 ~ 4
US r n 1F 72 n
Select/cancel reverse character.
 n = 00,01
NULL H 0 48 Move cursor up
NULL K 0 4B Move cursor left
NULL M 0 4D Move cursor right
NULL P 0 50 Move cursor down
NULL G 0 47 Move cursor to left-most position
NULL O 0 4F Move cursor to right-most position
BS 08 Back space
HT 09 Horizontal tab
LF 0A Line feed
HOM 0B Move cursor to home position
US B 1F 42 Move cursor to bottom position
CLR 0C
CLR 12
Clear display screen
CR 0D Carriage return
CAN 18 Clear cursor line, and clear string mode
DLE n 10 n
Display position
 n = 0 ~ 27h, for location.
ESC W n s x1 y1
x2 y2
1B 57 n s x1 y1 x2 y2
Set or cancel the window range
 n = 1 ~ 4, for window number
 s = 0: cancel
s = 1: set
 1 ≦ x1 ≦ x2 ≦ 14h, for columns
location.
 1 ≦ y1 ≦ y2 ≦ 2, for lines location.
ESC R n 1B 52 n
Select international character set (20H~7Fh).
 n = 00 ~ 1Fh. See note *1
ESC t n 1B 74 n
Select character code table (80H~FFh).
 n = 00 ~ 1Fh. See note *2
ESC = n 1B 3D n
Select peripheral device, display or printer
 n = 1~3
 n = '1': enable printer only
 n = '2': enable display only
 n = '3': enable both of printer and
display