Specifications

EPSON 5–39
SED1225 Series
SED1225
Series
CAUTIONS
The following points should be noted when this Development Specification is used:
1. This Development Specification is subject to modification for improvement without prior notice.
2. This Development Specification is not intended to guarantee enforcement of industrial property and other rights, or
to grant license for the use of this product. Examples of applications mentioned in this Development Specification are
given for effective understanding of the product. We are not responsible for any circuit problems which might occur
due to use of these examples. The size of the values appearing in the characteristics table is represented by the size
of the number line.
3. Part or whole of this Development Specification shall not be quoted, reproduced or used for other purposes without
permission of our company.
For the use of the semi-conductor, take note of the following:
“Handling cautions for light”
According to the principle of the solar battery the semiconductor characteristics are changed when exposed to light.
So misoperation may occur if this IC is exposed to light.
For the single IC unit, measures against light are not yet completely taken. The board and the product where this
IC is mounted must be provided with the following measures:
(1) For designing and mounting, measures must be taken to provide the structure which ensures the light protecting
properties of the IC during actual use.
(2) In the inspection process, environmental design must be made with consideration given to the light protecting
properties of the IC.
(3) To ensure light protecting properties of the IC, consideration must be given to the surface, back and sides of
the IC chip.