User’s Guide CMP0005-00 EN
SC-F6000 Series User’s Guide Copyrights and Trademarks Copyrights and Trademarks No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this Epson printer. Epson is not responsible for any use of this information as applied to other printers.
SC-F6000 Series User’s Guide Contents Contents Saving Optimal Settings for the Current paper (Print Paper Settings). . . . . . . . . . . . . . . . . . . . . Custom Paper Setting Details. . . . . . . . . . . . . . Saving Settings. . . . . . . . . . . . . . . . . . . . . . . . Printable area. . . . . . . . . . . . . . . . . . . . . . . . . . . Turning Off the Power Using Power Off Timer ..................................... Canceling Printing. . . . . . . . . . . . . . . . . . . . . . .
SC-F6000 Series User’s Guide Contents The prints are not what you expected. . . . . . . . . 60 Feeding or ejecting problems. . . . . . . . . . . . . . . 61 Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Appendix Options and Consumable Products. . . . . . . . . . . Supported Media. . . . . . . . . . . . . . . . . . . . . . . . Roll Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . Moving and Transporting the Printer. . . . . . . . . . Moving the Printer. . . . . . . . .
SC-F6000 Series User’s Guide Introduction ❏ Keep the entire computer system away from potential sources of electromagnetic interference, such as loudspeakers or the base units of cordless telephones. Introduction Important Safety Instructions ❏ Use only the type of power source indicated on the product’s label. ❏ Use only the power cord that comes with this product. Use of another cord may result in fire or electric shock. Read all of these instructions before using the printer.
SC-F6000 Series User’s Guide Introduction ❏ Always turn the product off using the Power button on the control panel. When this button is pressed, the Power light flashes briefly then goes off. Do not unplug the power cord or turn off the product until the Power light stops flashing. Note: Illustrations When handling the ink packs The illustrations in this manual may differ slightly from the actual objects they are intended to represent. ❏ Keep ink packs out of the reach of children and do not drink.
SC-F6000 Series User’s Guide Introduction Printer Parts Front section A Printer cover Open this cover when cleaning the printer or clearing jams. B Maintenance box covers Open these covers when replacing the Maintenance Box. U “Replacing Maintenance Boxes” on page 51 C Casters There are two casters on each leg. The casters are normally kept locked once the printer is in place. D Ink tank Holds ink used for printing.
SC-F6000 Series User’s Guide Introduction F Side cover Open the side cover to remove the slider for chip unit replacement. Always close the side cover securely after inserting the slider. G AC inlet Connect the supplied power cable here. H Option port There is no option that can connect to the printer. I LAN port Connects the LAN cable. J Data light The network connection status and data reception are indicated by a lit or flashing light. On : Connected. Flashing : Receiving data.
SC-F6000 Series User’s Guide Introduction R Adapter holder The roll paper adapter is placed in this holder after the roll paper is attached. S Paper slot Paper slot used when printing with roll paper. T Print head Fires ink via high density nozzles while moving left and right to print. U Paper eject guide Guides the paper so that it is ejected smoothly.
SC-F6000 Series User’s Guide Introduction Slider Roll paper adapter Use the supplied roll paper adapter when loading roll paper onto the printer. U “Loading Roll Paper” on page 21 A Slider Attach the chip unit included with the ink pack before refilling ink. U “Replacing and Refilling Consumables” on page 48 A Adapter lock lever B Ink inlet cover Lift to unlock, lower to lock. Unlock when attaching roll paper to the adapter, lock once the roll is attached.
SC-F6000 Series User’s Guide Introduction D Screen Displays the printer's status, menus, error messages, and so on. U “Screen View” on page 12 Control panel E Menu button Displays the menu for the tab currently selected in the display. U “Using the Control Panel Menu” on page 33 F y button (Back button) If menus are displayed, pressing this button takes you up one level in the menu hierarchy. U “Menu Operations” on page 33 G l/r buttons (Left/Right buttons) ❏ Use these buttons to select tabs.
SC-F6000 Series User’s Guide Introduction Displays the Maintenance menu, which is used for nozzle checks and head cleaning. Displays the printer's status, operation, and error messages. U “Adjusting the Print Head” on page 45 U “What to Do When a Message Is Displayed” on page 57 L W button (Pause/Cancel button) ❏ ❏ B Tabs/Info Display Area The following 5 tabs are displayed in this area. The printer enters pause status if this is pressed while printing.
SC-F6000 Series User’s Guide Introduction - : The Maintenance Tab The maintenance tab shows the status of the Maintenance Box and is used to display the Maintenance menu. : The Ink Tab This tab displays the status of the chip unit. The Info Display Area The display changes as follows whenever an error is detected in an installed chip unit: Normal The Info Display Area The maintenance tab info display area shows Maintenance Box status and the approximate amount of space remaining in the Maintenance Box.
SC-F6000 Series User’s Guide Introduction Easy maintenance Roll paper and all replacements, including ink refills, Maintenance Boxes, and cutters, are installed from the front, allowing the printer to be placed against a wall. The printer does not have to be moved to allow rear access. Features The main features of this printer are described below. Realizing High Productivity High-speed printing The speed of the print head and paper feed have been increased for faster printing.
SC-F6000 Series User’s Guide Introduction Notes on Usage and Storage ❏ Do not install the printer next to heat sources or directly in the path of air from a ventilator or air conditioner. Failure to observe this precaution could result in the print head nozzles drying and clogging. Installation space ❏ The print head may not be capped (i.e., may not move to the right-hand side) if an error occurs and the printer is turned off without first resolving the error.
SC-F6000 Series User’s Guide Introduction ❏ To ensure print quality, use all the ink in the ink pack before the earlier of the following dates: and conditions of storage. In such a case, the repair work will also be charged. ❏ The date printed on the ink pack Contact your dealer or Epson Support. ❏ The roller may leave an impression on paper that is left in the printer. This can also cause wavy or curled paper resulting in paper feeding problems or the print head could be scratched.
SC-F6000 Series User’s Guide Introduction Notes on handling printed paper To maintain long lasting, high quality print results, note the following points. ❏ Do not rub or scratch the printed surface. If they are rubbed or scratched, the ink may peel off. ❏ Do not touch the printed surface; Failure to observe this precaution may cause ink to rub off. ❏ Make sure the print outs are completely dry before folding of stacking; otherwise, the color may change where they touch (leaves a mark).
SC-F6000 Series User’s Guide Introduction Introducing the Supplied Software Contents of the Software Disc The supplied Software Disc contains the following software. Install as required. More information be found in the Network Guide (pdf) or via online help for the application in question. Note: ❏ The included software disc does not contain any printer drivers. A software RIP is required to print. ❏ Download the latest version of the software from EPSON's website.
SC-F6000 Series User’s Guide Introduction Uninstalling Software Starting EPSON LFP Remote Panel 2 To remove the EPSON LFP Remote Panel 2 or EPSON communications driver, follow the procedure below. Launch EPSON LFP Remote Panel 2 after confirming that the printer displays Ready. A B c ❏Important: You must log in with an Administrators group. The application can be launched using either of the following two methods. ❏ Double-click the EPSON LFP Remote Panel 2 icon on the desktop.
SC-F6000 Series User’s Guide Introduction D Select the target printer icon, and then click OK. E Follow the on-screen instructions to continue. When the delete confirmation message appears, click Yes. Restart the computer if you are reinstalling the EPSON communications driver.
SC-F6000 Series User’s Guide Basic Operations Basic Operations C Place roll paper on the roll rest on top of the printer. D Size the two supplied roll paper adapters to the roll core. Loading and Removing the Roll Paper Loading Roll Paper Load roll paper after attaching the supplied roll paper adapters. 3-inch core Important: c Insert the paper just before printing. The roller may leave an impression on paper that is left in the printer.
SC-F6000 Series User’s Guide Basic Operations F Raise the adapter lock lever to release the lock on each of the two roll paper adapters. I Press the ( button on the control panel. Confirm that Roll Paper is highlighted in the display and press the Z button. J Insert the roll paper in the paper slot and pull it through. Press the adapters in until they are fully inserted in the roll, with no gaps. G Lower the adapter lock levers to lock the adapters in place.
SC-F6000 Series User’s Guide Basic Operations K ❏ Manual cut: Lower the roll lock lever. Press the ) button to cut the paper using the built-in cutter. A cutline is printed for manual cutting and can be used as a guide when cutting paper using the built-in cutter. Note: ❏ It may take a while to cut the roll paper. ❏ L Some of the roll paper may not be cut using the built-in cutter. Use a cutter sold at a store to cut the paper. Follow the steps below when using a third-party cutter.
SC-F6000 Series User’s Guide Basic Operations Removing the roll paper Buttons that are used in the following settings This section describes how to remove and store roll paper after printing. The pressure rollers may leave impressions on paper that is left in the printer. Buttons that are used in the following settings Cutting paper manually using the built-in cutter Press the ) button.
SC-F6000 Series User’s Guide Basic Operations D Raise the roll lock lever. Viewing and Changing Media Settings The following is displayed in the control panel after paper is loaded. E Holding the paper by the roll paper adapters, move the roll to the roll rest. Checking Media Settings F The dialog displays the following options for the paper currently loaded in the printer. Lift the adapter lock levers to release the roll paper adapters.
SC-F6000 Series User’s Guide Basic Operations Replacing Paper Adjusting Settings Follow the steps below to change the settings displayed. This section describes how to replace paper. The procedure is displayed on the control panel screen. Follow these instructions. Buttons that are used in the following settings Buttons that are used in the following settings A Select an option. To print at current settings Press the d/u buttons to highlight Keep Settings Above and press the Z button.
SC-F6000 Series User’s Guide Basic Operations ❏ Platen Gap Before Printing ❏ Detect Paper Thickness Before printing, set the paper settings for the characteristics of the paper you are going to use. Settings are adjusted as follows. ❏ Paper Feed Adjust ❏ Paper Suction ❏ Select Custom Paper Setting in the printer Paper menu.
SC-F6000 Series User’s Guide Basic Operations B C Press the d/u buttons to highlight Custom Paper Setting and press the Z button. C The Custom Paper Setting menu will be displayed. Detect Paper Thickness Press the y button to return to the paper settings menu. You can print out a paper thickness detection pattern to determine and set the optimal paper thickness based on the printout.
SC-F6000 Series User’s Guide Basic Operations D Select Pattern, and then press the Z button. E Press the Z button to print an adjustment pattern. F Measure the distances between the "+" symbols in the printed adjustment pattern. Paper Suction Choosing too high a value for thin paper will increase the distance between the paper and the print head, causing print quality to decline or preventing the paper feeding correctly. If this happens, lower the paper suction.
SC-F6000 Series User’s Guide Basic Operations Setting Name Printable area You can assign a name to saved custom paper settings. Choose an easy-to-remember name for quick selection. A Press the d/u buttons on the paper settings menu to highlight Setting Name, and then press the Z button. B Enter the setting name. This section describes the printable areas for the printer.
SC-F6000 Series User’s Guide Basic Operations Roll Paper Margin Parameter Margin Values Top15mm/Bottom150mm A = 15 mm Turning Off the Power Using Power Off Timer C = 150 mm Top5mm/Bottom5mm B, D = 3 mm The printer offers the following two power management options. A, C = 5 mm ❏ Sleep mode B, D = 3 mm 15mm The printer enters sleep mode when there are no errors, no print jobs being received, and no control panel or other operations performed.
SC-F6000 Series User’s Guide Basic Operations Canceling Printing Press the W button on the printer, select Job Cancel on the screen, and then press the Z button. The print job is canceled even in the middle of printing. It may take a while before the printer returns to ready status after canceling a job.
SC-F6000 Series User’s Guide Using the Control Panel Menu Using the Control Panel Menu Menu Operations The steps for displaying the various menus are shown below. The example below shows the steps for accessing the Paper menu. * After pressing the Z button to select the highlighted option, press the y button to return to the previous menu. Press the W button to exit.
SC-F6000 Series User’s Guide Using the Control Panel Menu Menu List The items and options available in the menu are described below. See the reference pages for more details on each item. , Print Queues menu U “Print Queues menu” on page 37 Menu item Description Print Job Log Sheet Press Z to start printing. . Paper menu U “Paper menu” on page 37 Menu item Load/Remove Paper Select Paper Type Custom Paper Setting Description Remove Paper Displays instructions for removing the paper.
SC-F6000 Series User’s Guide Using the Control Panel Menu Menu item Description Nozzle Check Press Z to start printing. Head Cleaning Head Alignment All Nozzles Execute (Light), Execute (Medium), Execute (Heavy) Selected Nozzles Execute (Light), Execute (Medium), Execute (Heavy) Manual(Uni-D) Press Z to start printing. Manual(Bi-D) Cutter Maintenance Adjust Cut Position -3 to 3 mm Replace Cutter Press Z to start move.
SC-F6000 Series User’s Guide Using the Control Panel Menu Menu item Network Setup Power Settings Preference Administrator Menu Description IP Address Setting Auto - Panel IP Address, Subnet Mask, Default Gateway Print Status Sheet Press Z to start printing. Restore Settings Yes, No Sleep Mode 5 to 240 minutes Power Off Timer Off, 1 to 24 hours Restore Settings Yes, No Language Lists the supported languages.
SC-F6000 Series User’s Guide Using the Control Panel Menu Menu Descriptions Print Queues menu Item Description Print Job Log Sheet Press the Z button to print the print job log. Paper menu indicates factory default settings. Item Description Load/Remove Paper Remove Paper Press the Z button to view instructions for removing the paper. Follow the on-screen instructions to remove the paper. Instructions are not displayed if no paper is loaded.
SC-F6000 Series User’s Guide Using the Control Panel Menu Item Custom Paper Setting Description XXXXXXXXXXX (name of custom paper type) Select Reference Paper Photo Paper You can select the media type that is the closest to the paper you are using. Matte Paper Plain Paper Others Platen Gap No Paper Selected Select this option if you do not wish to specify the paper type. Narrow Select the platen gap which is the distance between the print head and the paper. Normally, select Standard.
SC-F6000 Series User’s Guide Using the Control Panel Menu Item Description Paper Feed Adjust Pattern Use this setting if you are unable to resolve banding issues (horizontal striped lines or uneven colors) in the standard print area even after head cleaning or head alignment. Value Pattern Selected Press the Z button to print an adjustment pattern. Measure the distances between the "+" symbols in the printed adjustment pattern.
SC-F6000 Series User’s Guide Using the Control Panel Menu Item Description Print Paper List Press the Z button to print a list of custom paper settings. Maintenance menu Item Description Nozzle Check Press the Z button to print a nozzle check pattern. Visually inspect the printed pattern and perform head cleaning if you notice faint or missing areas.
SC-F6000 Series User’s Guide Using the Control Panel Menu Item Printer Setup Description Roll Paper Setup Auto Cut On Choose On to automatically cut roll paper using the built-in cutter as each page is printed, Off to disable auto paper cutting. Off Refresh Margin On If On is selected during borderless printing, the printer will automatically trim the leading edge to remove any ink stains that may have been left by the previous copy; to disable this feature, choose Off.
SC-F6000 Series User’s Guide Using the Control Panel Menu Item Description Advanced Settings Roll Paper Tension Low Select High or Extra High if the paper wrinkles during printing. Normal Roll Paper Tension can be specified separately for each paper type using the Custom Paper Setting option in the Paper menu. High Extra High When Custom Paper is chosen for Select Paper Type, the printer will use the value selected for Roll Paper Tension in the Custom Paper Setting.
SC-F6000 Series User’s Guide Using the Control Panel Menu Item Printer Status Description Firmware Version xxxxxxx,x.xx,xxxx You can see the firmware version. Option Status The connection status is not indicated because there is no option that can connect to the printer. Show Total Prints XXXXXXX m2 (XXXXXX ft2) Print Status Sheet Press the Z button to print a list of current printer settings. View the total area printed (six-figure maximum). Choose this option to view settings at a glance.
SC-F6000 Series User’s Guide Using the Control Panel Menu Item Preference Description Language Japanese, English, French, Italian, German, Portuguese, Spanish, Dutch, Russian, Korean, Chinese Select the language used on the control panel's screen. Unit: Length m Select the unit of length which is displayed on the control panel's screen or printed on the patterns. ft/in Alert Lamp Setting On Choose whether the large alert lamp lights (On) or does not light (Off) when an error occurs.
SC-F6000 Series User’s Guide Maintenance Checking for clogged nozzles Maintenance Buttons that are used in the following settings Adjusting the Print Head You need to adjust the print head if white lines appear in your print outs or if you notice the print quality has declined. You can perform the following printer maintenance functions for maintaining the print head in good condition to ensure the best print quality. Carry out appropriate maintenance depending on the print results and situation.
SC-F6000 Series User’s Guide Maintenance Cleaning the print head B Press the d/u buttons to highlight Head Cleaning and press the Z button. From the control panel you can clean all nozzles or select to clean only those nozzles for which the printed nozzle check pattern indicates a problem. C Select the method for specifying the nozzle rows for cleaning. All Nozzles Inspect the printed pattern and select this method if all patterns contain faint or missing areas.
SC-F6000 Series User’s Guide Maintenance F Printing the pattern for head alignment takes from 7 to 11 minutes. The time required varies with the size of the pattern printed. You can select between Uni-D and Bi-D head alignment. Bi-D is recommended in most circumstances. Choose Uni-D if Bi-D head alignment does not completely fix the problem. Note the numbers of the patterns with the fewest white lines or in which the white lines are most evenly spaced.
SC-F6000 Series User’s Guide Maintenance Replacing and Refilling Consumables !Caution: ❏ Store ink packs in a location out of reach of children. ❏ Time Period for Chip Unit Replacements and Ink Refills Wear protective eyewear and gloves when refilling ink. Be sure to read the Material Safety Data Sheet (MSDS) before using ink packs. You can download it at your local Epson Web site. If the message Chip unit expended.
SC-F6000 Series User’s Guide Maintenance A If the message Chip unit expended. is displayed on the control panel screen, check the remaining ink in the ink tank via the scale on the ink pack. B Open the side cover. C Insert a finger into the depression on the top of the slider and pull straight outward.
SC-F6000 Series User’s Guide Maintenance E Attach the chip unit supplied with the new ink pack to the slider. G Shake the new ink pack as shown in the illustration horizontally for approximately 5 cm left and right for 5 seconds approximately 15 times. H Open the slider ink inlet cover. I Remove the ink inlet cap from the ink tank. Check to confirm that the color of the label on the slider matches the color of the label on the chip unit when installing.
SC-F6000 Series User’s Guide Maintenance J Tear off the ink pack spout opening. Important: c Get all the ink out of the ink pack so that there is none remaining. Do not use the ink in an ink pack to refill multiple different ink tanks. This can cause messages from the remaining ink warning system to not be displayed properly. K L Put the ink inlet cap back on the ink tank. M Close the slider ink inlet cover. Fill the ink tank with the ink from the ink pack.
SC-F6000 Series User’s Guide Maintenance Important: c Do not reuse maintenance boxes that have been C Place the used Maintenance Box in the clear bag included with your new Maintenance Box, and make sure that the zipper is closed tight. D Install the new Maintenance Box. removed and left out in the open for a long period of time. The ink on the inside will be dry and hard and will be unable to absorb enough ink.
SC-F6000 Series User’s Guide Maintenance !Caution: Do not store the cutter within the reach of Important: c Take care not to damage the cutter blade. Dropping it or knocking it against hard objects may chip the blade. children. The cutter's blade could cause an injury. Pay careful attention when replacing the cutter. Buttons that are used in the following settings A Remove any paper from the printer. B Confirm that the printer is ready to print.
SC-F6000 Series User’s Guide Maintenance ❏ Ink holder ❏ Damper kit ❏ Pump cap ❏ Ink supply tank The part life varies with operating conditions. Base the decision to replace the print head on the quality of the print results. H After replacing the cutter, press the Z button. The cutter will return to its original position. Ready is displayed in the control panel when the process is complete.
SC-F6000 Series User’s Guide Maintenance B Cleaning the Printer To keep your printer in optimum operating condition, clean it (about once a month). Press the ) button followed by the d button. Paper is fed while the d button is pressed. If the paper is not soiled, cleaning is complete. Cut the paper after cleaning is done. Cleaning the outside U “Manual cut method” on page 23 A Remove any paper from the printer.
SC-F6000 Series User’s Guide Maintenance c ❏Important: Be sure not to touch the roller or the ink absorbing areas (b, shown in gray) during cleaning; otherwise, prints may be soiled. ❏ Be careful not to touch the ink tubes inside the printer, otherwise, the printer may be damaged. D If any paper particles (that looks like white powder) accumulates on the platen, use something like a cocktail stick to push it in. E When you have finished cleaning, close the printer cover.
SC-F6000 Series User’s Guide Problem Solver Problem Solver What to Do When a Message Is Displayed If the printer displays one of the messages shown below, refer to the solution listed and take the necessary steps. Message What to do Chip Unit Error Chip unit not recognized. Reattach or replace. ❏ Reattach the chip unit. If the message persists, replace with a new chip unit. U “Replacing and Refilling Consumables” on page 48 ❏ Condensation may have formed inside the tank.
SC-F6000 Series User’s Guide Problem Solver When a Maintenance Call/Service Call Occurs Error message What to do Maintenance Request Replace Part Now/Replace Part Soon XXXXXXXX A part used in the printer is nearing the end of its service life. Contact your dealer or Epson Support and tell them the maintenance request code. You cannot clear the maintenance request until the part is replaced. A service call occurs if you continue to use the printer.
SC-F6000 Series User’s Guide Problem Solver Troubleshooting o Make sure the USB hub is recognized correctly on the computer. If the computer correctly detects the USB hub, disconnect all USB hubs from the computer and connect the printer directly to the computer USB port. Ask the USB hub manufacturer about USB hub operation. You cannot print (because the printer does not work) The printer does not turn on. o You cannot print under the network environment.
SC-F6000 Series User’s Guide Problem Solver o Is the message Motor Self Adjustment displayed on the control panel's screen? o The print quality declines when an old ink pack is used. Always use new ink packs. Use the ink before the recommended usage date on the ink pack. The printer adjusts the internal motor. Wait for a while without turning off the printer. The nozzle check pattern is not printed correctly. o o Perform head cleaning.
SC-F6000 Series User’s Guide Problem Solver o Is the roll paper margin set to 15 mm or 35 mm? o Depending on the content of the print data, the bottom edge may be scuffed when printing. In this situation it is best to create your data with a bottom margin of 150 mm. If the value selected for Roll Paper Margin in the Setup menu is wider than the margins selected in the application, priority will be given to the value selected for Roll Paper Margin.
SC-F6000 Series User’s Guide Problem Solver o Is the paper too thick or too thin? Check that the paper specifications are compatible with this printer. For information about the paper types and appropriate settings, see the documentation supplied with the paper, or contact the dealer of the paper or the manufacturer of the RIP. o Remove the paper via the paper feed slot or the eject slot. F After removing the paper, close the printer cover and press the Z button. G Perform a nozzle check.
SC-F6000 Series User’s Guide Problem Solver The paper is not cut cleanly. o Replace the cutter. If the paper is not cut cleanly, replace the cutter. U “Replacing the Cutter” on page 52 A light is visible inside the printer. o This is not a failure. The light is a light inside the printer. The administrator password has been lost. o Should you forget the administrator password, contact your dealer or Epson Support. Head cleaning starts when the printer is turned on.
SC-F6000 Series User’s Guide Appendix Appendix Options and Consumable Products The following options and consumable products are available for use with your printer. (As of November, 2012) For the latest information, see the Epson Web site. Important: c Using ink from an undesignated ink pack may result in a malfunction. Epson shall not be held responsible for any damages or problems with the printer that may occur when using undesignated, non-genuine ink packs.
SC-F6000 Series User’s Guide Appendix Supported Media Moving and Transporting the Printer This printer supports the following paper specifications. The type and quality of the paper will greatly affect print quality. Be sure to use the correct paper for your needs. Refer to the manual included with your paper or contact the manufacturer for details regarding any precautions or warnings that must be taken into consideration when using that paper.
SC-F6000 Series User’s Guide Appendix ❏ Perform Head Alignment and check the print quality. System Requirements U “Minimizing Print Misalignments (Head Alignment)” on page 46 Refer to the software RIP manual. Transport Before transporting the printer, contact your dealer or Epson Support.
SC-F6000 Series User’s Guide Appendix Specifications Table Printer Specifications Operating temperature/humidity Printer Specifications Printing method On-demand ink jet Nozzle configuration 360 nozzles × 2 rows × 4 colors (Black, Cyan, Magenta, Yellow) Resolution (maximum) 720 × 1440 dpi Control code ESC/P raster (undisclosed command) Paper feed method Friction feed Built-in memory 512 MB for Main 128 MB for Network Interface Hi-Speed USB-Compatible with the USB 2.0 Specification.
SC-F6000 Series User’s Guide Appendix Standards and Approvals Safety UL 60950-1 CAN/CSA C22.2 No.60950-1 Low Voltage Directive 2006/95/ EC EMC EN 60950-1 FCC part 15 subpart B Class A CAN/CSA-CEI/IEC CISPR 22 Class A AS/NZS CISPR 22 Class A EMC Directive 2004/108/EC EN 55022 Class A EN 55024 EN 61000-3-2 EN 61000-3-3 !Warning: This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
SC-F6000 Series User’s Guide Where To Get Help Where To Get Help Contacting Epson Support Technical Support Web Site Before Contacting Epson If your Epson product is not operating properly and you cannot solve the problem using the troubleshooting information in your product documentation, contact Epson support services for assistance. If Epson support for your area is not listed below, contact the dealer where you purchased your product.
SC-F6000 Series User’s Guide Where To Get Help Help for Users in North America Help for Users in Europe Epson provides the technical support services listed below. Check your Pan-European Warranty Document for information on how to contact Epson support. Internet Support Help for Users in Australia Visit Epson’s support website at http://epson.com/ support and select your product for solutions to common problems.
SC-F6000 Series User’s Guide Where To Get Help ❏ Sales enquiries and product information We encourage you to have all the relevant information on hand when you ring. The more information you prepare, the faster we can help solve the problem. This information includes your Epson product documentation, type of computer, operating system, application programs, and any information you feel is required.
SC-F6000 Series User’s Guide Where To Get Help Bandung Lippo Center 8th floor Jl. Gatot Subroto No.2 Bandung Technical Support Hotline You can also contact our technical staff at the following telephone and fax numbers: Phone/Fax: (62) 22-7303766 Surabaya Hitech Mall lt IIB No. 12 Jl. Kusuma Bangsa 116 – 118 Surabaya Phone: (62) 31-5355035 Fax: (62)31-5477837 Yogyakarta Hotel Natour Garuda Jl. Malioboro No.
SC-F6000 Series User’s Guide Where To Get Help World Wide Web (http://www.epson.co.in) Information on product specifications, drivers for download, and products enquiry are available. Epson India Head Office - Bangalore Phone: 080-30515000 Fax: 30515005 Trunk Line: (63-2) 706 2609 Fax: (63-2) 706 2665 Helpdesk Direct Line: (63-2) 706 2625 E-mail: epchelpdesk@epc.epson.com.ph World Wide Web (http://www.epson.com.
SC-F6000 Series User’s Guide Software License Terms Software License Terms Open Source Software Licenses OPEN SOURCE SOFTWARE LICENSE 1) This printer product includes open source software programs listed in Section 6) according to the license terms of each open source software program.
SC-F6000 Series User’s Guide Software License Terms The list of LGPL Programs: uclibc-0.9.32 libusb-1.0.8 zeroconf 0.6.1-1 iksemel-rev25 e2fsprogs-1.41.14 Apache License This printer product includes the open source software program “Bonjour” which apply the Apache License Version2.0 (“Apache License Program”). Bonjour License This printer product includes the open source software program “Bonjour” which applies the terms and conditions provided by owner of the copyright to the “Bonjour”.
SC-F6000 Series User’s Guide Software License Terms Bonjour This printer product includes the open source software programs which apply the Apple Public Source License Version1.2 or its latest version ("Bonjour Programs"). We provide the source code of the Bonjour Programs pursuant to the Apple Public Source License Version1.2 or its latest version until five (5) years after the discontinuation of same model of this printer product.
SC-F6000 Series User’s Guide Software License Terms 1.8 "Source Code" means the human readable form of a program or other work that is suitable for making modifications to it, including all modules it contains, plus any associated interface definition files, scripts used to control compilation and installation of an executable (object code). 1.9 "You" or "Your" means an individual or a legal entity exercising rights under this License.
SC-F6000 Series User’s Guide Software License Terms 2.4 Third Party Rights. You expressly acknowledge and agree that although Apple and each Contributor grants the licenses to their respective portions of the Covered Code set forth herein, no assurances are provided by Apple or any Contributor that the Covered Code does not infringe the patent or other intellectual property rights of any other entity.
SC-F6000 Series User’s Guide Software License Terms 9. LIMITATION OF LIABILITY.
SC-F6000 Series User’s Guide Software License Terms 13.2 Relationship of Parties. This License will not be construed as creating an agency, partnership, joint venture or any other form of legal association between or among You, Apple or any Contributor, and You will not represent to the contrary, whether expressly, by implication, appearance or otherwise. 13.3 Independent Development.
SC-F6000 Series User’s Guide Software License Terms Other Software Licenses Info-ZIP copyright and license This is version 2007-Mar-4 of the Info-ZIP license. The definitive version of this document should be available at ftp://ftp.info-zip.org/pub/infozip/license.html indefinitely and a copy at http://www.info-zip.org/pub/infozip/ license.html. Copyright © 1990-2007 Info-ZIP. All rights reserved.
