User's Guide CMP0070-00 EN
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Copyrights and Trademarks Copyrights and Trademarks No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this Epson printer.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Contents Contents Removing Roll 2(SC-T7200D Series/SCT5200D Series only). . . . . . . . . . . . . . . . . . . . Loading and Removing Cut Sheets. . . . . . . . . . . . Loading Cut Sheets. . . . . . . . . . . . . . . . . . . . . Removing Cut Sheets. . . . . . . . . . . . . . . . . . . Loading and Removing Poster Board. . . . . . . . . . Loading Poster Board. . . . . . . . . . . . . . . . . . .
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Contents Preparing to Scan. . . . . . . . . . . . . . . . . . . . . . Notes on Loading Documents in the Scanner ................................... How to Load Documents. . . . . . . . . . . . . . . . . How to change the document eject direction and scanning accuracy. . . . . . . . . . . . . . . . . . . Large Copying. . . . . . . . . . . . . . . . . . . . . . . . Large Scan. . . . . . . . . . . . . . . . . . .
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Contents Starting Epson Printer Utility 4. . . . . . . . . . . . 133 Epson Printer Utility 4 Functions. . . . . . . . . . . 133 Uninstalling the printer driver. . . . . . . . . . . . . . . 135 Removing EPSON LFP Remote Panel 2. . . . . . 135 Supported Media. . . . . . . . . . . . . . . . . . . . . . . . . 210 Epson Special Media Table. . . . . . . . . . . . . . . 210 Usable Commercially Available Paper Size. .
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Introduction ❏ Keep the entire computer system away from potential sources of electromagnetic interference, such as loudspeakers or the base units of cordless telephones. Introduction ❏ Use only the type of power source indicated on the product’s label. Important Safety Instructions ❏ Use only the power cord that comes with this product. Use of another cord may result in fire or electric shock.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Introduction ❏ Always turn the product off using the Power button on the control panel. When this button is pressed, the Power light flashes briefly then goes off. Do not unplug the power cord or turn off the product until the Power light stops flashing. Note on this Guide Meaning of Symbols When handling the ink cartridges !Warning: Warnings must be followed to avoid serious bodily injury.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series Introduction ❏ Windows Vista refers to Windows Vista Home Basic Edition, Windows Vista Home Premium Edition, Windows Vista Business Edition, Windows Vista Enterprise Edition, and Windows Vista Ultimate Edition. ❏ Windows XP refers to Windows XP Home Edition, Windows XP Professional x64 Edition, and Windows XP Professional. ❏ Windows Server 2012 refers to Windows Server 2012 Essentials Edition, Server 2012 standard Edition.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Introduction Printer Parts Front The illustration shows the SC-T7200 Series. The operation is the same even when the shape of the paper basket or other items are different. A Printer cover Open this cover when cleaning the printer or clearing jams. B Poster board support Raise this support so that you can place the media on it when printing on poster board. The support ensures that poster board feeds smoothly.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Introduction C Maintenance box covers Open these covers when replacing the Maintenance Box. Some models have only the right cover. U “Replacing Maintenance Boxes” on page 185 D Paper basket/Large-capacity paper basket Output from the printer collects in this basket, keeping the media clean and free of creases. The optional Stand (24) for the SC-T3200 Series comes with a paper basket.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Introduction O Status light The color indicates the network transmission speed. Off : 10Base-T Red : 100Base-T Green : 1000Base-T P Control panel U “Control panel” on page 14 Q Alert lamp This lamp lights or flashes when an error occurs. Lights or : An error occurred. How the lamp lights or flashes varies with the type of error. The control panel flashes displays a description of the error.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Introduction Back The illustration shows the SC-T7200D Series. A Option slot Slot to connect the optional hard disk unit or Adobe PostScript 3 Expansion Unit. B Roll 2 unit connector (SC-T7200D Series/SC-T5200D Series only) Connect the connection cable of the Roll 2 unit. Normally the cable is connected when using the printer.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Introduction The roll paper adapter is placed in this holder after the roll paper is attached. Roll 2 unit (SC-T7200D Series/ SC-T5200D Series) E Roll lock lever The illustration shows the SC-T7200D Series. A lever that locks roll paper in place after the roll is attached to the adapter holder. Roll paper adapter Use the supplied roll paper adapter when loading roll paper onto the printer.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Introduction D Screen Displays the printer's status, menus, error messages, and so on. U “Screen View” on page 15 Control panel E Menu button Displays the menu for the tab currently selected in the display. (Excluding the and + tabs.) U “Using the Control Panel Menu” on page 136 F ybutton (back button) If menus are displayed, pressing this button takes you up one level in the menu hierarchy.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Introduction Displays the Maintenance menu, which is used for nozzle checks and head cleaning. U “Adjusting the Print Head” on page 179 L Wbutton (pause/cancel button) ❏ The printer enters pause status if this is pressed while printing. To release the pause status, press the W button again, or select Pause Cancel on the screen and then press the Z button.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Introduction : The Large Copy Tab This tab is displayed only when the optional MFP scanner is installed. . : The Paper Tab The information of loaded paper appears in the info display area. In this tab, select a job you want to do, and then press the Z button. When the optional hard disk unit or Adobe PostScript 3 Expansion Unit is installed, you can also use the scan function.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Introduction : The Ink Tab Shows ink cartridge status in the info display area. - : The Maintenance Tab Displays Maintenance Box status in the info display area. When you press the Menu button, the Main‐ tenance menu appears. The Info Display Area As shown in the following illustrations, the icon changes based on the status of the ink cartridge.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Introduction + : The Enlarged Copy Tab The enlarged copy tab is displayed only when a scanner is connected. Features The main features of this printer are described below. Pressing the Z button when this tab is selected displays the Enlarged Copy screen.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Introduction Pigmented inks are used for all colors for unsurpassed water resistance, allowing print results to be safely carried out-of-doors.*1 Checking current operating status even from afar thanks to an alert lamp Errors are immediately obvious even at a distance, thanks to the large, highly visible alert lamp.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Introduction Choose from three sizes of cartridge according to the task Choose from 110, 350, and 700 ml cartridges according to the frequency with which the printer is used. Use cost-effective 700 ml cartridges for high-volume poster printing or select individual 110 or 350 ml cartridges for monochrome printing.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Introduction SC-T7200D Series/SC-T5200D Series Notes when using the printer Note the following points when using this printer to avoid breakdowns, malfunctions, and print quality decline. ❏ When using the printer, observe the operating temperature and humidity range described in the "Specifications Table".
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Introduction ❏ If you do not print for a long time, the print head nozzles may become clogged. We recommend that you print once a week to prevent the print head from clogging. ❏ To ensure good results, use all the ink in the cartridge within a year of installation.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Introduction Notes on Handling ❏ If you put the print outs in an album before they are completely dry, they may be blurred. ❏ Use Epson special media under normal room conditions (temperature: 15 to 25˚C, humidity: 40 to 60%). ❏ Do not use a dryer to dry the print outs. ❏ Avoid direct sunlight. ❏ Do not fold the paper or scratch the surface of the paper.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Introduction Introducing the Supplied Software The software that can be used on the printer is provided in the following two ways. ❏ Stored on the software disc that is provided See the following section for descriptions of the software that has been stored. ❏ Installed on the printer You can start it from a web browser via a network. See the following for descriptions of the software that has been installed.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Introduction Software Name Summary LFP Print Plug-In for Office This is a plug-in for Microsoft Office applications (Word, Excel, and PowerPoint). Installing this plug-in displays a ribbon in Office applications that gives quick access to horizontal and vertical banner printing and enlarged printing. Before installing the plug-in, check the following.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Introduction ❏ Allows you to execute printer maintenance functions to maintain print quality, check the printer's status, and so on. Summary of the Printer Driver The main functions of the printer driver are described below. Windows ❏ Converts print data received from applications into printable data and sends it to the printer.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Introduction Example How to use Remote Manager Start and use the software from the web browser of a computer or tablet terminal that is connected to the printer via the network. In addition to checking the printer's status and doing network settings, you can Upload And Print and Print From Folder.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series Introduction File formats Not installed Installed HP-GL/2 ✓ ✓ HP RTL ✓ ✓ PDF - ✓ PostScript - ✓ EPS - ✓ TIFF - ✓ JPEG - ✓ CALS G4(type l) - ✓ HP-GL/2 and HP RTL format files are printed according to the HP-GL/2 Settings in the printer's settings menu. U “Printer Setup” on page 154 The other files are printed according to the settings in the PS3 Expansion Unit in the printer's settings menu.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations Attaching the Roll Paper Adapter Basic Operations A Loading and Removing the Roll Paper Turn on the printer by pressing the P button. Note: ❏ Closing the paper basket makes the work easier. SC-T7200 Series/SC-T5200 Series/SC-T3200 Series U “Storing and Opening” on page 48 Load roll paper after attaching the supplied roll paper adapters.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations C D Move the size switch levers of the two supplied roll paper adapters in accordance with the roll-core size of the roll paper to be loaded. E Attach an adapter to each end of the roll. F Lower the lock levers to lock the adapters in place. Press the adapters in until they are fully inserted in the roll, with no gaps.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations A E Open the roll paper cover. Make sure that the roll paper is free of slack and the end is not folded, and then insert it into the paper slot. When the Auto Loading is set to On on the SC-T7200D Series/SC-T5200D Series When roll paper is being inserted, a beep tone sounds. If you hear the sound, proceed to Step 6.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations F Lower the roll paper lock lever, and then press the Z button. Note: When the optional MFP Scanner has been raised upon loading roll paper, make sure to return the scanner back in place for use.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations Loading Roll 2 (SC-T7200D Series/SC-T5200D Series only) D Confirm that the roll paper lock lever is raised. E Place the roll paper adapters on the adapter guides so the flat surfaces of the adapters is facing down. Next, following the adapter guides, slide the roll slowly inside. Buttons that are used in the following settings A Lower the paper basket to the horizontal position.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations F Make sure that the roll paper is free of slack and the end is not folded, and then insert it into the paper slot. H Set the Roll 2 unit, and then press Z button. I Check the media type. If roll paper is being inserted, paper is loaded automatically, and a beep tone sounds.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations Setting from the printer Important: c The commercially available media types, such as Use the l/r buttons of the control panel to select the / tab and press the Z button or Menu button. In the displayed Setup menu, select Printer Setup > Roll Paper Setup > Auto Cut > On. For manual cutting, select Off. The default setting is On.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations A Press the ) button. Viewing the interior of the printer without opening the printer cover, press the d button to align the cut location with the mark on the right side of the printer's interior. Buttons that are used in the following settings A Note: The minimum length of paper that can be cut with the built-in cutter is fixed at 60 to 127 mm and cannot be changed.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations D Open the roll paper cover. G Lift the adapter lock levers to release the roll paper adapters. H Remove the roll paper adapters. Note: When removing the roll paper, you can use the optional roll paper belt to prevent the roll paper from unwinding. E Raise the roll lock lever. After rewinding the roll paper carefully, store it in the original package. Close the roll paper cover.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations Note: When removing the roll paper, you can use the optional roll paper belt to prevent the roll paper from unwinding. Buttons that are used in the following settings A F Raise the roll lock lever. G Move the roll paper to the roll rest. H Set the Roll 2 unit. Confirm that the printer is ready and press the ( button. The Load/Remove Paper menu will be displayed.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations I Lift the adapter lock levers to release the roll paper adapters. Loading and Removing Cut Sheets The procedure for loading and positioning cut sheets varies with the thickness of the paper. 0.08 to 0.8 mm U “Loading Cut Sheets” on page 39 0.8 to 1.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations C Buttons that are used in the following settings Feed the paper into the paper slot with the printable surface toward you. Insert the paper into the paper slot, keeping its right edge aligned with the loading mark on the roll paper cover. Slide the paper in until it stops. A Turn on the printer by pressing the P button. Note: ❏ Closing the paper basket makes the work easier.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations Loading and Removing Poster Board Note: To remove paper that was loaded but not used, press the ( button and select Remove Paper. This section describes how to load and remove poster board from 0.8 to 1.5mm thick. Buttons that are used in the following settings The printer can be used with board of the following sizes.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations Note: The paper that can be used in the printer is detailed in the following section. C Raise all the poster board supports. D Place the side to printable face up with its edge in front of the projecting supports as shown. Press the supports diagonally downwards and then lift them straight up.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations E Insert the board, using the edge to keep the supports pressed down. F Open the printer cover. G Insert the board, checking to be sure that it passes under the rollers. H Close the printer cover. I Position the trailing and right edges of the board as shown by the loading indicators.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations J B After positioning the media, press the Z button. The paper will be fed into the printer. K Check the media type. c IfImportant: poster board will not be used in the next The display shows the type of paper currently selected with the printer. To print with the displayed settings, use the d/u buttons to select Keep Settings Above, and press the Z button.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations Viewing and Changing Media Settings After the paper is loaded, the control panel screen shows the media type currently selected with the printer. Note: If On is selected for Roll Paper Remaining and roll paper with a barcode for roll data is loaded, the printer will read the barcode and adjust settings automatically. C Select the media name, and then press the Z button.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations ❏ Printing Availability Replacing Paper The printer predicts whether the current job can be printed on the amount of paper remaining and displays the results, preventing waste caused the paper running out part way through a print job. This allows you to choose whether to print on the existing roll or replace the paper, preventing waste. This section describes how to replace paper.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations Cut Sheets Cut sheets are automatically ejected to the rear, where they can be removed by hand. Using the Paper Basket (SC-T7200 Series/ SC-T5200 Series/ SC-T3200 Series) Poster Board Poster board is partially ejected to the front. Supporting the board with one hand to prevent it falling, press the Z button and pull out the board.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations Adjusting the PositionU “Adjusting the Position” on page 49 U “Adjusting the Position” on page 49 Paper size and position during continual collection Paper Size A1 Portrait (594 × 841 mm) US D Portrait (22×34 in) A0 Portrait (841 × 1189 mm)* Position Standard position (lower stack guide) Standard position (raise stack guide) US E Portrait (34×44 in)* A2 Portrait (420 × 594 mm) ARCH C Portr
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations B Important: c The paper basket will not function correctly when Use the top stack guide switching lever to lower the top stack guide. opened to the position shown below at right. Stop when the paper basket is in the position shown below at left. Adjusting the Position As shown in the following illustrations, adjust the lower stack guide to match the size of the paper to be collected.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations B Guide positioned for other sizes of paper Lift the guide up, and then lower it lightly. Horizontal position A Use the top stack guide switch lever to raise the top stack guide. Note: If the standard position is erroneously set instead of the horizontal position, lift the guide up, and then lower it while pushing lightly.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations Using the Large-Capacity Paper Basket (SC-T7200D Series/SC-T5200D Series) Storing and Adjusting the Position Storing Close the large-capacity paper basket before loading paper or moving the printer. The large-capacity paper basket collects paper from the printer, preventing it falling to the floor and becoming creased or dirty.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations Next, push it in straight. Large-capacity position Pull the basket toward you slightly, and then lower it. Lower the basket to the position in which it is fixed by the upper protrusions of the left and right frames. To change the basket from the horizontal position to another position, reverse the procedure above. Horizontal position Pull the basket toward you slightly, and then lower it.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations Using the Auto Take-up Reel Unit (SC-T7200 Series Only) Important: c Confirm that the end of the roll is cut straight across. The unit will not function as expected if the end of the roll is wavy or curved. U “Manual cut method” on page 35 The optional auto take-up reel unit automatically takes up paper as it is printed.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations Backward : The roll is taken up with the printable side in. Forward : The roll is taken up with the printable side out. Off : The auto take-up reel unit does not take up paper. Buttons that are used in the following settings C Manual switch Selects the manual take-up direction. The setting selected with the Manual switch takes effect when the Auto switch is in the Off position.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations E After wrapping the paper around the core, ensure that paper around the core is sufficiently loose. Tape the end to the roll core. Place tape (available from third-party suppliers) at the center and then at the left and right ends. Note: The tensioner supplied with the auto take-up reel unit is used with some types of paper.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations Buttons that are used in the following settings A E Tape the end to the roll core. F Keep the d button in the control panel pressed until you have fed enough paper for about three wraps around the roll core. G Keep the Manual switch pressed to Backward to wrap the paper three times around the core.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations After wrapping the paper around the core, ensure that paper around the core is sufficiently loose. H Buttons that are used in the following settings Set the Auto switch to Backward. A Set the Auto switch to Off. B Cut the paper and take it up until it is all on the auto take-up reel unit roll core.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations C Unlock the movable unit and remove it from the roll core. Basic Printing Methods (Windows) When removing the movable unit, support the roll core with one hand to prevent it falling to the floor. Printing is performed from the application used to create the document you wish to print. The basic procedure is described below. A Turn on the printer, and load the paper.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations C After confirming that the printer is selected, click Printer properties or Properties to display the Printer Settings tab. U “Switching Roll Paper Automatically before Printing (SC-T7200D Series/SC-T5200D Series Only)” on page 97 D Check the options selected for Media Settings.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations G If the desired size is not available in the menu, click Custom Paper Size to add a custom paper size. U “Printing at Non-Standard Sizes” on page 93 F In the Print Quality area, choose an option for Select Target. Choose an option according to the type of document and how it will be used. Select "fit to" and borderless printing options.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations J An error message is displayed if an error occurs or an ink cartridge needs replacing while printing. When settings are complete, click Print. The progress bar is displayed, and printing starts. Screen while printing The following screen is displayed when you start printing, and the progress bar (the computer's processing status) is displayed.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations For Mac OS X 10.6 and 10.5, click the arrow ( to make settings on the Page Setup screen. Basic Printing Methods (Mac OS X) A ) Turn on the printer, and load the paper. U “Attaching the Roll Paper Adapter” on page 29 U “Loading Cut Sheets” on page 39 U “Loading Poster Board” on page 41 B When you have created the data, from the File menu of the application, click Print and so on.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations XXXX (cut sheet): Print with margins on cut sheets. Print with top, right, and left margins of 3 mm and a bottom margin of 14 mm. Mac OS X 10.5 Choose Page Setup and Media Type according to the type of paper loaded in the printer.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series Basic Operations G Check settings. H When settings are complete, click Print. The selected settings are reflected in the area on the right; check that settings are correct. The printer icon is displayed in the Dock while printing. Click the printer icon to display the status. You can check the progress of the current print job and the printer status information. You can also cancel a print job.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations Roll Paper Margin SettingsU “Setup menu” on page 154 Printable area indicates factory default settings. This section describes the printable areas for the printer. If the margin set in an application is larger than the following setting values, sections beyond the specified margins are not printed.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations Turning Off the Power Using Power Off Timer Cut Sheets Printable Area When printing borderless on the left and right, the left and right margins are 0 mm. (Borderless printing is not available with poster board.) The printer offers the following two power management options. The arrow in the illustration indicates the direction of the ejected paper.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Basic Operations The setting is Off. Canceling Printing Power Off Timer settings can be adjusted in the Setup menu. U “Setup menu” on page 154 There are a few ways to stop printing operations depending on the situation. About Power Management You can adjust the time before Power Management is applied. Any increase will affect the printer’s energy efficiency.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series Basic Operations Canceling from the computer (Mac OS X) Click the printer icon in the Dock. A B Select the job you want to cancel, and then click Delete. If the job has been sent to the printer, print data is not displayed on the above screen. Canceling on the printer Press the W button, select Job Cancel on the screen, and then press the Z button. The print job is canceled even in the middle of printing.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Saving to and Reprinting on the Optional Hard Disk Unit • Viewing and Resuming Held Print Jobs (SC-T7200 Series/SC-T5200 Series/SC-T3200 Series only) If the source or other settings selected with the printer differ from the settings specified in the print job, an error will occur and printing will be suspended.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Saving to and Reprinting on the Optional Hard Disk Unit • From LFP HDD Utility (Windows only) The LFP HDD Utility can be used to manage print jobs stored on a hard disk. It is used when the printer is connected to the computer via USB.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Saving to and Reprinting on the Optional Hard Disk Unit A B When you have created the data, click Print in the File menu. After confirming that the printer is selected, click Printer properties or Properties to display printer settings. C In the Advanced tab, click the Settings button in the Hard Disk Unit area and select Print and Save or Save only. D Next, print the document normally.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series Saving to and Reprinting on the Optional Hard Disk Unit B Press the d/u buttons to highlight Stored Job and press the Z button. The print job tab info display area shows the names of stored print jobs. C Press the d/u buttons to select a job to print or delete and press the Z button. After selecting a file name, you can check the thumbnail by pressing the r button.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Copying and Scanning ❏ Saved to a hard disk installed to a printer connected to the MFP Scanner that performed the scan. (Scan To HDD) Copying and Scanning * The destination printer must have a MFP Scanner and a hard disk installed. To confirm whether this function is supported, see the manual included with the printer.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Copying and Scanning Control panel *4 Copy Manager Scan To e-mail ✓ ✓ Receive e-mail ✓ ✓ Scan To Shared Folder ✓ ✓ Scan To HDD ✓ ✓ You can only print PDF files and TIFF files when the optional Adobe PostScript 3 expansion unit is installed. How to start Copy Manager Copy Manager is equipped with the printer's network interface and functions if one of the following is installed to the printer.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Copying and Scanning Example c IfImportant: you use the "Scan to e-mail" or "Scan To Shared Folder" functions or do operations from Copy Manager without configuring the security settings, problems may occur, including the interception or falsification of information.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Copying and Scanning * When loading a thin document, we recommend placing it between clear holders or other similar objects. See the help for more details on Copy Manager functions. Notes on Loading Documents in the Scanner Documents that cannot be loaded Do not load the following documents. Failure to observe this precaution could cause paper jams or damage the scanner.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Copying and Scanning Remove the paper eject guides If the paper eject guides are left attached, the document will strike them and not be ejected.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Copying and Scanning B D To ensure that the document is not fed on an angle, we recommend inserting the long side of the document. With the side of the document to be read facing up, align the right edge of the document with the loading guide. C After the document has been loaded, remove the loading guide, and then make sure the left edge of the document and the guide line are aligned.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Copying and Scanning Buttons that are used in the following settings Buttons that are used in the following settings A At Large copy/Large scan screen, use the d/u buttons to select Scanner Maintenance and press the Z button. A Turn on the printer by pressing the P button. B Press the d/u buttons to select Eject Direction or Scan Speed and press the Z button.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Copying and Scanning F On the Large copy screen, you can press the d/u buttons to set the number of copies. Press the Z button to start copying. Buttons that are used in the following settings To change the copy settings or enlargement ratio, press the Menu button to display the Copy settings menu.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Copying and Scanning ❏ Print If Shared Folder or Send By Mail was selected, proceed to Step 7. G H You can only print PDF files and TIFF files when the optional Adobe PostScript 3 expansion unit is installed. Use the d/u buttons to select the save destination folder or address, and then press the Z button.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Copying and Scanning C * Displayed when a received scan file or a scan file is saved to the hard disk. If it is difficult to understand from just the file name, press the r button. If a value such as (3) appears in Rcvd Scan File Option, the value indicates the number of unprinted files in the received files that can be printed. B Use the d/u buttons to select the file you want to operate.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Copying and Scanning C Making Enlarged Copies with a A3 or A4 Scanner Connect the scanner to the printer using the cable supplied with the scanner. Connecting an Epson A3 or A4 scanner to the printer makes creating enlarged copies a snap; no computer is required. Supported scanners are listed on the Epson website. http://www.epson.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Copying and Scanning A Turn the printer and scanner on. B Load the printer with paper that supports enlarged copies. Note: If Other Size is selected for Auto and A0(2Sheets) for Output Size when the SC-T3200 Series is used, the document will be printed on two sheets as shown. The devices may be turned on in any order.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series Copying and Scanning ❏ The original is 4 x 6 size ❏ The original is printed on thick stock (e.g., postcards or photographs) ❏ When multiple copies are made from an original placed on the glass, the original may be scanned once for each copy. Wait until all the copies have been printed before opening the scanner cover. ❏ Use the ADF to scan multi-page documents.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Print From Folder Print From Folder The other files are printed according to the settings in the PS3 Expansion Unit in the printer's settings menu. U “Option Setup*4” on page 164 Function Summary You can select a file in a shared folder on the network that has been setup in advance and print it. Use Remote Manager to configure the shared folder settings.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Print From Folder Preparing to Print From Folder Procedure to Print From Folder Use Remote Manager to configure the shared folder settings as shown below. The procedure to Print From Folder from the operation panel is described below. Remote Manager is included in the software installed in the network interface of the printer.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series Print From Folder The preview screen appears if Preview is set to Yes. Press the Z button in the preview screen to start printing. To cancel the Preview, press the W button.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print ❏ Fit to Output Size More Ways to Print Automatically enlarges or reduces the image size to fit the paper size. Enlargements and Horizontal and Vertical Banners The printer driver can enlarge or reduce documents for different paper sizes. There are three setting methods.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print C Fitting Documents to the Width of the Roll Paper Choose whether to fit the short or long edge of the document to the roll paper width. Making Settings in Windows Display the printer driver's Printer Settings tab and select a Paper Size that matches the document page size.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print B C Select Fit to Roll Paper Width and choose whether to fit the short or long edge of the document to the roll paper width. B In the Layout tab, select Reduce/Enlarge and click Specify Size. C Choose an input method and select a size. D Check other settings, and then start printing. Enter a value directly or click the arrows to the right of the scale box to set the value.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print B Select Specify Size, choose a method for specifying the size, and select a size. B In the Layout tab, select Reduce/Enlarge and click Fit to Output Size. C Select the size of the paper used for printing. Enter a value directly or click the arrows to the right of the scale box to set the value. C Check other settings, and then start printing.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print B Select Fit to Output Size and choose a paper size that matches the paper in the printer. Printing at Non-Standard Sizes Before printing at non-standard sizes, including vertical or horizontal banners and documents with equal sides, save the desired paper size in the printer driver.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print Making Settings in Windows Display the printer driver's Printer Settings tab and click the Custom Paper Size. Note: ❏ To change the paper size you saved, select the paper size name from the list on the left. A U “Basic Printing Methods(Windows)” on page 58 C ❏ To delete the user-defined size you saved, select the paper size name from the list on the left, and then click Delete.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print C Enter the Width, Height for the Paper Size, enter the margins, and then click OK. Printing CAD Drawings The range of values available for page sizes and margins vary with the printer model and the values selected with the printer. The printer supports the HP-GL/2 driver and HP RTL (Raster Transfer Language) used in plotters.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print Printing while Emulating HP-GL/ 2 and HP RTL Note: The CAD / Line Drawing (Black), CAD / Line Drawing (Color) , and CAD / Line Drawing (Bi-Level) options are available for Select Target when a paper type suited to printing CAD drawings is selected. B The printer can emulate* HP-GL/2 (compatible with HP Designjet 750C) and HP RTL.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print B Switching Roll Paper Automatically before Printing (SC-T7200D Series/SC-T5200D Series Only) Open the Printer Settings tab of the printer driver and confirm that Source is Roll Auto XXXXX. XXXXX indicates the width of the roll paper currently in use. If the setting is not Roll Auto - XXXXX, click it and select Roll Auto - XXXXX.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print D Making Settings for Mac OS X Using the control panel of the printer, confirm Type Match is set in Setup menu > Printer Setup > Roll Paper Setup > Roll Switch Condition > Paper Type. A For Media Type, select the paper type you want to use for printing. In this example, Plain Paper or Singleweight Matte Paper is selected depending on the purpose of its use.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print C Settings on Windows Using the control panel of the printer, confirm Best Fit is set in Setup menu > Printer Setup > Roll Paper Setup > Roll Switch Condition > Paper Width. A For Paper Size, select the Paper Size set in the application. In this example, select A1 594 x 841 mm. The default Paper Width setting is Best Fit. If the setting has not been changed, the setting is Best Fit.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print C Check that the Roll Switch is Auto. In this example, the paper is loaded as follows. If the setting is not Auto, click it and select Auto. Roll 1: Plain Paper A1 Width Roll 2: Plain Paper A1 Width Settings on Windows Use the control panel of the printer to open the Paper menu and set Roll Paper Remaining to On, and then set the Roll Paper length loaded into both Roll 1 and Roll 2.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print D Set Paper Size, Print Quality, and other necessary settings, and then print. D Check that the Roll Switch is Auto. E Set Print Quality and other necessary settings, and then print.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print Borderless Printing You can print your data without margins on the paper. The types of borderless printing you can choose vary as shown below depending on the media type. ❏ Retain Size Roll Paper: No margins for all edges, no margins for the left and right Create the print data larger than the paper size in the applications to produce borderless output.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series More Ways to Print Supported paper widths SC-T7200 Series/ SC-T7200 D Series SC-T5200 Series/ SC-T5200 D Series SC-T3200 Series 16 inch ✓ ✓ ✓ US C/17 inch ✓ ✓ ✓ B2/515 mm ✓ ✓ ✓ A1/594mm ✓ ✓ ✓ 24 inch ✓ ✓ ✓ B1/728 mm ✓ ✓ − A0/841 mm ✓ ✓ − 36 inch ✓ ✓ − B0/1030 mm ✓ − − 44 inch ✓ − − Depending on the media type, the print quality may decline or borderless printing cannot be selected.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print About Roll Paper Cutting When performing borderless printing on roll paper, you can specify whether it is left and right borderless printing or all edges borderless printing, and how to cut the paper in the printer driver's Roll Paper Option. The cutting operation for each value is shown in the following chart.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print C Setting Procedures for Printing Making Settings in Windows Display the printer driver's Printer Settings tab and adjust the following settings. In the Layout tab Borderless Enlargement Setting area, select either Auto Expand or Retain Size.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print D E When roll paper is used, Auto Cut options are available in the Advanced tab Roll Paper Option area. Max : 3 mm for left and 5 mm for right (the image shifts 1 mm to the right) U “About Roll Paper Cutting” on page 104 Normal : 3 mm for left and right Check other settings, and then start printing. Min : 1.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print Making Settings in Windows When using applications featuring a color management function, specify how to adjust colors from these applications. Correct color and print A The printer driver automatically and internally corrects colors to match the color space. You can select from the following color correction modes.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print C Select Color Management and then select Document. Select Printer Manages Colors as the Color Handling setting, and then click Print. Clicking the Settings button allows you to adjust Gamma, Brightness, Contrast, Saturation, color balance, and other settings. See the printer driver help for more details on each item.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print Note: For information on supported platforms, see the website for the application in question. Note: EPSON Color Controls will not be available in the following applications if Step 1 is omitted. Example of Adobe Photoshop CS5 ❏ Adobe Photoshop CS3 or later ❏ Adobe Photoshop Lightroom 1 or later ❏ Adobe Photoshop Elements 6 or later Open the Print screen.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print F Make the necessary settings. Multi-Page/Poster Printing See the printer driver help for more details on each item. You can print multiple pages on a single sheet or a single page across multiple sheets. The following three multi-page/poster printing methods are available. • Folded Double-Side (Windows only) Two consecutive pages are printed on a single sheet.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print • Poster (Windows only) A single page can be printed across multiple sheets. The sheets can then be joined together to form large posters (up to 16 times the original size). If Borderless Poster Print is selected, the sheets can be joined without trimming the edges, but because the portions outside the edges of the paper will be lost, the joins may be imperfect.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print B In the Print Layout dialog box, select the Number of pages per sheet and Page Order. Poster (Windows only) If the Print page frames check box is selected, page frames are printed on each page. A In the printer driver's Layout tab, select Page Layout. Next, select Poster and click the Settings button.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print C Enable or disable borderless printing. Note: Regarding the size after joining together: When borderless is selected: Select Borderless Poster Print. If Borderless Poster Print is not selected, a Print Cutting Guides option will be displayed. The finished size is the same whether or not Trim Lines is selected.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print The following section describes how to join four printed pages together. 114 A Ready the two top sheets and trim the excess from the left sheet by cutting along the line joining the two join guides (the centers of the X marks). B Lay the upper left sheet on top of upper right sheet.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print C With the two sheets overlapping, trim the excess by cutting along the line joining the two cut guides (the lines to the left of the X marks). D Rejoin the two sheets. E Repeat Steps 1 to 4 for the lower sheets. Use an adhesive tape to stick the backs of the sheets together.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print H I With the two sheets overlapping, trim the excess by cutting along the line joining the two cut guides (the lines above the X marks). 116 Join the upper and lower sheets together. Use an adhesive tape to stick the backs of the sheets together.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print J After joining all the sheets, trim off the borders by cutting along the cut guides (outside the X marks). Printing Multiple Documents (the Layout Manager) (Windows Only) Documents created in different applications can be printed together in your choice of layout. The Layout Manager can be used to improve efficiency and conserve paper.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide More Ways to Print The overall size and placement of the objects can be changed using the Preferences and Arrangement options in the File menu. Setting Procedures for Printing A Open the file you want to print in your application. B In the printer driver's Printer Settings tab, select Layout Manager and in the Size Settings area select the Paper Size chosen for the document in the source application.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series More Ways to Print Saving A On the Layout Manager screen, click File menu and then Save As. B Enter the file name, select the location, and then click Save. C Close the Layout Manager screen. Opening saved files A Right-click the Utility shortcut icon on the ), and then click Layout Windows Taskbar ( Manager on the menu displayed. The Layout Manager screen is displayed.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Color Management Printing Color Management Print Settings Color Management Printing You can perform color management printing using this printer's printer driver in the following two ways. About Color Management Choose the best method according to the application you are using, the operating system environment, the aim of the print out, and so on.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Color Management Printing Setting color management with the applications Setting profiles Settings for the input profile, printer profile, and intent (matching method) vary between three types of color management printing since their color management engines are used differently. This is because color management usage differs between the engines.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Color Management Printing C Set color management to off. Setting color management with the printer driver For Windows In the Printer Settings tab, select Advanced Settings in the Print Quality area and choose Off (No Color Management) for Color Mode. Color management printing by Host ICM (Windows) Use image data in which an input profile has been embedded. Also, the application must support ICM.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Color Management Printing Select Color Management and then select Document. Select Printer Manages Colors as the Color Handling setting, and then click Print. To change the profile, select Show all profiles at the bottom. D B When using applications without a color management function, start from Step 2.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Color Management Printing D Adobe Photoshop CS3 or later Adobe Photoshop Elements 6 or later Adobe Photoshop Lightroom 1 or later Choose Printer Settings from the list and select Advanced Settings for Mode. Select Off (No Color Management) for Color Mode. OS Color Management Settings Windows 10, Printer Manages Colors Windows 8.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Color Management Printing A In the printer driver's Printer Settings tab, select Advanced Settings for Print Quality, then select ICM for Color Mode and click Settings. U “Basic Printing Methods(Windows)” on page 58 B Intent Explanation Absolute Colorimetric Assigns absolute color gamut coordinates to the original and print data and converts the data.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Tips for Using the Printer Driver(Windows) B Tips for Using the Printer Driver (Windows) Right-click your printer icon, and click Printing preferences. Displaying the Settings Screen The printer driver dialog will be displayed.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Tips for Using the Printer Driver(Windows) Displaying Help Right-click on the item you want to check and display You can access the printer driver help in the following ways: Right-click the item, and then click Help. ❏ Click Help ❏ Right-click on the item you want to check and display Click the Help Button to Display By displaying help, you can use the contents page or keyword search to read the help.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Tips for Using the Printer Driver(Windows) You can save up to 100 settings. You can choose a setting you have registered from the Select Setting list box. Customizing the Printer Driver Note: You can save the settings as a file by clicking Export. You can share the settings by clicking Import to import the saved file on another computer. You can save the settings or change the display items as you prefer.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Tips for Using the Printer Driver(Windows) C Adjust settings for the new custom media and click OK. Rearranging display items To display frequently used items right away, you can arrange Select Setting, Media Type, and Paper Size as follows. ❏ Hide unnecessary items. ❏ Rearrange in an order of most frequent use. ❏ Arrange in groups (folders). D Click Custom Settings in the Advanced tab.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Tips for Using the Printer Driver(Windows) ❏ To delete a group (folder), click Delete Group. Overview of the Utility Tab ❏ Drag and drop unnecessary items to Not Display. The printer driver's Utility tab provides access to the following. Nozzle Check This function prints a nozzle check pattern to check if the print head nozzles are clogged.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Tips for Using the Printer Driver(Windows) Note: If you select the Shortcut Icon on the Monitoring Preferences screen, the Utility shortcut icon is displayed on the Windows Taskbar. SC-T7200 Series/SC-T5200 Series/SC-T3200 Series By right-clicking the icon, you can display the following menu and perform maintenance functions.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Tips for Using the Printer Driver(Windows) Uninstalling the printer driver D Select the target printer icon, and then click OK. E Follow the on-screen instructions to continue. Follow the steps below to remove the printer driver and EPSON LFP Remote Panel 2. c ❏Important: You must log in with an Administrators group.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Tips for Using the Printer Driver(Mac OS X) Using Epson Printer Utility 4 Tips for Using the Printer Driver (Mac OS X) You can perform maintenance tasks such as Nozzle Check or Head Cleaning by using Epson Printer Utility 4. This utility is installed automatically when you install the printer driver. Displaying the Settings Screen Starting Epson Printer Utility 4 Mac OS X 10.6.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Tips for Using the Printer Driver(Mac OS X) EPSON Status Monitor You can check the printer's status, such as the remaining ink level and error messages, on the computer's screen. When roll paper is loaded on Roll 1 or Roll 2 of the SC-T7200D Series/SC-T5200D Series, you can also check which is selected to be operating (in use).
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series Tips for Using the Printer Driver(Mac OS X) Uninstalling the printer driver Before reinstalling or upgrading the printer driver or EPSON LFP Remote Panel 2, uninstall the affected software. Use the Uninstaller to uninstall the printer driver. Downloading the Uninstaller Download the Uninstaller from the Epson website. http://www.epson.com/ Using the Uninstaller Follow the instructions on the Epson website.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Using the Control Panel Menu Menu Operations The steps for displaying the various menus are shown below. The example below shows the steps for accessing the Paper menu.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu When the optional MFP Scanner is connected Rcvd Scan File Option Start copying Available when the optional hard disk unit or Adobe PostScript 3 Expansion Unit has been installed and the MFP scanner is not installed When received scan files or scan files are saved to the hard disk unit or the Adobe PostScript 3 Expansion Unit 137
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Menu List The items and options available in the menu are described below. See the reference pages for more details on each item.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Menu item Select Paper Type Description Plain Paper Lists supported Epson media. Photo Paper Matte Paper Others Custom Paper Custom Paper Setting XXXXXXXXXXXX XXXXXXXX (name of custom paper type) Lists the names of user-defined custom paper types. Select Reference Paper Plain Paper Lists supported Epson media.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Menu item Description Head Cleaning Head Alignment Auto(Uni-D) Press Z to start printing/alignment. Auto(Bi-D) Manual(Uni-D) Press Z to start printing. Manual(Bi-D) Cutter Maintenance Adjust Cut Position -3 to 3mm Replace Cutter Press Z to start move.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Menu item Printer Setup Description Roll Paper Setup Auto Cut On, Off Cutting Mode Normal, Silent Refresh Margin On, Off Page Line On, Off Roll Paper Margin Normal, Top15mm/Bottom15mm, Top 35 mm/Bottom 15 mm, Top 45 mm/Bottom 15 mm, 3 mm,15 mm Roll End Option Continue, Stop Printing, Reprint*3 Auto Loading*1 On, Off Roll Switch Setting*1 Auto, Roll 1, Roll 2 Roll S
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Menu item Description HP-GL/2 Settings Quality Speed, Fine Output Size Auto, A Series, US-ANSI, US-ARCH, B Series, Photo Series, Others, User Defined Margin 3mm, 5mm Margin Options Standard, Add Margins, Clip By Margins Rotate 0˚, 90˚, 180˚, 270˚ Mirror On, Off Select Palette Software, Default, Palette A, Palette B Define Palette Palette A Pen Number Pen Width, Pe
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Menu item Option Setup*4 Printer Status Description PS3 Expansion Unit Version PostScript Version, PDF Version PS Status Sheet Press Z to start printing.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Menu item Network Setup Power Settings Preference Administrator Menu Description IP Address Setting Auto - Panel IP Address, Subnet Mask, Default Gateway IPv6 Setting Enable, Disable IPsec Setting Enable, Disable PSK Setting Set key at 20 characters or less (half-size characters or sym‐ bols) IEEE802.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu +Enlarged Copy menu Displayed only when a A3 or A4 scanner has been connected to the printer.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Menu item Scan Setting*3 Description Color/Grayscale Color, Grayscale, B&W Document type Text/Line Drawing, Tracing Paper, Recycled Paper, Blueprint, Blueprint Inverted, Poster Width Auto, ISO A, US-ANSI, US-ARCH, JIS B, ISO B, cm, inch Save Image type JPEG, PDF, TIFF Resolution 100dpi, 200dpi, 300dpi, 360dpi, 400dpi, 600dpi File Size Compression High, Normal, Low Densi
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Menu Descriptions Print Queues menu When the printer printed without using the printer driver included with the printer or the PS driver included with the optional Adobe PostScript 3 Expansion Unit, the job names and estimated times in the following table may not be displayed correctly.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Item Savd Job Queue*3 Description XXXXXXXXXXX (name of stored print job) Thumbnail Stored Job Name User Paper Length Pages Paper Type Copies Source Size Estimated Print Time A thumbnail of the selected saved job is displayed. When you press the r button, detailed information from the last time the file was printed is displayed.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Paper menu If you use the Custom Paper Setting to register print settings for commercial paper on the SC-T7200D Series/ SC-T5200D Series, observe the following precautions. If you are printing on both the Roll 1 and Roll 2, configure them individually, even when the paper is the same.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Item Custom Paper Setting Description XXXXXXXXXXX (name of custom paper type) Select Reference Paper Plain Paper You can select the media type that is the closest to the paper you are using. Photo Paper Matte Paper Others Platen Gap No Paper Selected Select this option if you do not wish to specify the paper type.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Item Description Paper Feed Adjust Pattern Value Use this setting if you are unable to resolve banding issues (horizontal striped lines or uneven colors) in the standard print area (for cut sheets, the area excluding the 1 to 2 cm strip at the bottom of the paper) even after head cleaning or head alignment. Pattern selected Press the Z button to print an adjustment pattern.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Item Description Setting Name Enter a name of up to 22 characters for custom paper settings. Choose an easy-to-remember name for quick selection. Restore Settings Yes Restore the selected custom paper settings to default values. No Print Paper List Press the Z button to print a list of custom paper settings.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Maintenance menu Item Description Nozzle Check Press the Z button to print a nozzle check pattern. Inspect the pat‐ tern visually and perform head cleaning if you detect faint or missing colors. U “Checking for clogged nozzles” on page 179 Head Cleaning Inspect the printed pattern and select the check boxes for patterns with faint or missing areas.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Setup menu Selecting Administrator Menu displays a password prompt. No password is entered at shipment; press the Z button to proceed. If the administrator password has been changed, enter the administrator password.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Item Description Roll End Option Continue Auto Loading*1 Stop Printing* Select the action to perform for a roll after replacement: print the remaining data (Continue) / do not print (Stop Printing) / print again from the beginning (Reprint). Reprint*3 Data is not reprinted in the following situations, even when Reprint is configured.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Item Roll Switch Condition*1 Description Paper Type Type Match* Disable From the following options, select the condition under which to switch to another roll for printing when the current roll has run out. ❏ Type Match: Switch to the other roll for printing only when the paper type specified in the job and the paper type of the other roll are the same.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Advanced Settings Item Description Roll Paper Tension 1 to 5 (3*) This setting is used if one of the following settings are configured to Extra High: Paper menu > Custom Paper Setting > Roll Paper Tension or Printer driver's Paper Configuration > Roll Paper Tension.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Item Description Quick Cut On* Specify the cutting operation for printing multiple page jobs. Off If you turn this On, while the next job is printing, the preceding print job is cut when its end reaches the cutting position. This shortens the printing time because printing and cutting are done in tandem.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Item Description Output Size Auto* The hard clip area of the PS command of the data becomes the base output size. The actual output size depends on the Margin Options setting. When the data does not contain a PS command, the smallest rectangle area of in the following illustration including the print object becomes the base output size.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Item Description Margin Options Standard* The position at which the margin is added depends on the Output Size setting, as shown below. ❏ When set to Auto in the following Adds the value selected for Margin (area of illustration) outside the hard clip area of the PS command of the data (area of in the following illustration).
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Item Description Add Margins The position at which the margin is added depends on the Output Size setting, as shown below. ❏ When set to Auto The result is the same as when Standard is selected.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Item Rotate Description Clip By Margins Depending on the Output Size setting, adds the value selected for Margin (area of in the following illustration) inside the hard clip area of the PS command of the data or the size selected for Output Size (area of in the following illustration). When there is a print object in the margin section, it is clipped and not printed.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Item Description Mirror On Off* Select whether to flip horizontally (mirror) using the center of the Output Size width as the basis line and then print (On) or print without flipping horizontally (Off). If an angle is specified for Rotate, the rotated result is flipped horizontally.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Item Description Save To HDD Print And Save* Set whether or not to save print jobs in the optional hard disk unit or Adobe PostScript 3 Expansion Unit. Print Only By saving print jobs, you can print jobs directly from the hard disk and check the print job information and status.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Item Description Margin Options Standard* The position at which the margin is added depends on the Output Size setting, as shown below. ❏ When set to Auto in the following illustration) Adds 3 mm of margin (area of outside the data size (paper size or image size; area of in the following illustration).
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Item Description Add Margins The position at which the margin is added depends on the Output Size setting, as shown below. ❏ When set to Auto The result is the same as when Standard is selected.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Item Description Clip By Margins Adds 3 mm of margin (area of in the following illustration) inside the data size (paper size or image size) or the size selected in the following illustration) depend‐ for Output Size (area of ing on the Output Size setting. When there is a print object in the margin section, it is clipped and not printed.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Item Description CMYK Simulation SWOP v2/US Web Uncoated v2/US Sheetfed Coated v2/US Sheetfed Uncoatedv2/Coated GRACoL 2006/SWOP Grade 3 Paper/SWOP Grade 5 Paper/Coated FOGRA27/Web Coated FOGRA28/Uncoated FOGRA29/Coated FOGRA39/Euroscale Coated v2*/Euroscale Uncoated v2/JapanWebCoated (Ad)/ JapanColor2001Coated/JapanColor2001Uncoated/Japan‐ Color2002Newspape/JapanColor2003WebCoat
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Item Description Save To HDD Print And Save* Set whether or not to save print jobs in the optional hard disk unit or Adobe PostScript 3 Expansion Unit. Print Only By saving print jobs, you can print jobs directly from the hard disk and check the print job information and status.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Item Description Print Status Sheet Press the Z button to print a list of the Network Setup. Use this information for a complete overview of network settings. Restore Settings Yes Select Yes to restore all Network Setup content to default values.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Administrator Menu Item Description Change Password Enter an administrator password of up to 20 characters. Selecting Administrator Menu displays a password prompt. The Administrator Menu will only be displayed if the correct password is entered, preventing non-administrators from accidentally changing settings. Keep the password in a safe place.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Item Description Reset PS Settings*4 Yes Select Yes to initialize the user font and user ICC profile saved in the user area of the Adobe PostScript 3 Expansion Unit. Initialization deletes saved data. No Reset All Settings Yes Select Yes to restore defaults for all settings except the Date And Time, Language, and Unit: Length options in the Setup menu.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Enlarged Copy menu The Enlarged Copy menu is displayed only when a A3 or A4 scanner is connected. Supported scanners are listed on the Epson website. http://www.epson.com * Default setting Item Description Color/Grayscale Color* Choose whether to do enlarged copying in color or in grayscale.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Large Copy / Large Scan menu This menu is displayed only when the optional MFP Scanner is connected.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Item Description Margin Options Clip By Margins* A 3-mm margin is added to the inside of the scanned area on all four sides and then the document is printed. (refer to the following illustration) If part of the image is in the margin, it is not printed.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Item Description Add Margins The margin set in Roll Paper Margin is added to the outside of the scanned area and then the document is printed. (refer to the following illustration) Borderless The scanned area is printed as is. (refer to the following illustration) The Roll Paper Margin setting is disabled. Density Level -3 to 3 (0*) Set the copy density.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Item Description Sharpness Level -3 to 3 (0*) Set the sharpness. Negative values (-) are weaker, and positive values (+) are stronger. Scan Setting*3 Item Description Color/Grayscale Color* Choose whether to scan colored documents in color, or to change settings to scan in grayscale or black and white.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Using the Control Panel Menu Item Description Density Level -3 to 3 (0*) Choose the density for scanning. Negative values (-) are lighter, and positive values (+) is darker. Contrast Level -3 to 3 (0*) Set the contrast. Negative values (-) are weaker, and positive values (+) are stronger. Background Level -3 to 3 (0*) Set the adjustment value for the background.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Maintenance Maintenance From the computer Adjusting the Print Head Use Epson Printer Utility 4 for Mac OS X. Explanations in this section use the Windows printer driver as an example. U “Epson Printer Utility 4 Functions” on page 133 You need to adjust the print head if white lines appear in your print outs or if you notice the print quality has declined.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Maintenance ❏ From the computer From the printer All nozzles are cleaned. Buttons that are used in the following settings ❏ From the printer You can clean all nozzles or select for cleaning only those nozzles for which the printed nozzle check pattern indicates a problem. Notes on head cleaning A Note the following points when performing head cleaning.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Maintenance C U “Using Epson Printer Utility 4” on page 133 A Click Head Cleaning from the Utility tab in the printer driver's Properties (or Printing preferences) screen. Select nozzle rows for cleaning. Press the l/r buttons to highlight numbers corresponding to check patterns with faint or missing segments and press the d/u button to select. You can select multiple nozzle rows.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Maintenance registers the optimum adjustment value to the printer. Note: Head Alignment is adjusted according to the paper currently loaded in the printer. Load the paper for which head alignment is required. Auto head alignment takes about 30 minutes to complete. Note, however, that auto head alignment is not available with the paper or in the circumstances listed below.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Maintenance B E Click Print Head Alignment from the Utility tab in the printer driver's Properties (or Printing preferences) screen. Press the Z button to print an adjustment pattern. If Auto is selected, the printer will automatically align the head as it prints the head alignment pattern. The Maintenance menu will be displayed when head alignment is complete.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Maintenance C Replacing Consumables Hook a finger into the indentation on the top of the cartridge and pull it straight toward you. Replacing Ink Cartridges If one of the installed ink cartridges is expended, printing cannot be performed. If an ink low warning is displayed, we recommend replacing the ink cartridge(s) as soon as possible.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Maintenance E U “Options and Consumable Products” on page 208 Holding the cartridge with the label out, slide it all the way into the slot. Match the color of the cartridge to the color of the label on the printer. Important: c Do not reuse maintenance boxes that have been removed and left out in the open for a long period of time.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Maintenance C Place the used Maintenance Box in the clear bag included with your new Maintenance Box, and make sure that the zipper is closed tight. Important: c Take care not to damage the cutter blade. Dropping it or knocking it against hard objects may chip the blade. Buttons that are used in the following settings D Install the new Maintenance Box. A Remove any paper from the printer.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Maintenance H After replacing the cutter, press the Z button. The cutter will return to its original position. Ready is displayed in the control panel when the process is complete. G Install the new cutter. Insert the cutter so that the pin on the printer matches up with the hole on the cutter. Use a cross-head screwdriver to tighten down the screw to hold the cutter in place.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Maintenance Cleaning the Printer Important: c Failure to remove dust and particles of paper from the platen could result in clogged nozzles or damage to the print head. To keep your printer in optimum operating condition, clean it regularly (about once a month). Cleaning the roller Cleaning the outside A Remove any paper from the printer.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Maintenance C E Open the printer cover and use a soft, clean cloth to carefully clean away any dust or dirt inside the printer. Thoroughly clean area (a), shown in blue in the illustration below. To avoid spreading the dirt, wipe from the inside to the outside. If there is a serious dirt problem, clean it using a soft, clean cloth dampened with a mild detergent.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Maintenance (2) Use the other cloth to wipe away any remaining glass cleaner. Cleaning the MFP Scanner (option) If the glass surface or rollers of the scanner are covered in dust or stained, unwanted stripes and lines may appear in the copy results and scanned images. D Clean the roller directly under the glass surface. E Close the scanner cover until you hear a click.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Problem Solver Problem Solver What to do When a Message is Displayed If the printer displays one of the messages shown below, refer to the solution listed and take the necessary steps. Messages What to do Ink Cartridge Error Ink cartridge cannot be recognized. Insert again or replace ink cartridge. ❏ Ink Cartridge Error Ink cartridge cannot be detected. Insert again or replace ink cartridge.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Problem Solver Messages What to do Take-Up Error Is anything obstructing the take-up reel sensor system? After checking the take-up reel unit sensor and removing any obstructions, press the Z button. If there is loose paper around the take-up reel unit roll core, set the Auto switch to Off and keep the Manual pressed in the take-up direction to remove the slack.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Problem Solver Messages What to do Scanner Error Refer to manual for details. ❏ Release the A3/A4 scanner transportation lock and turn the printer and scanner off and then on again. ❏ Turn the devices on and off several times. The scanner can be used after the message is no longer displayed. If this message appears on the LCD panel again, contact your dealer or Epson Support.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Problem Solver Messages What to do Paper Type Error Cannot switch to specified roll paper because paper type is different. Continue to print with paper currently loaded? The Media Type setting of the printer driver and the paper type of the roll paper loaded on the printer are different. If the Z button is pressed, the printer prints to the roll paper currently in use.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Problem Solver Messages What to do Information Cannot send file. Refer to manual for details. If you tried to copy or send a large-scan image file to a shared folder, and this message appears, check the following.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Problem Solver Troubleshooting o Does the printer port setting match the printer connection port? Check the printer port. Click the Port tab in the printer Properties dialog and check the option selected for Print to following port(s). You cannot print (because the printer does not work) The printer does not turn on.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Problem Solver o Is the USB hub recognized correctly? o Make sure the USB hub is recognized correctly on the computer. If the computer correctly detects the USB hub, disconnect all USB hubs from the computer and connect the printer directly to the computer USB port. Ask the USB hub manufacturer about USB hub operation. Open the status dialog for your printer and check whether printing is paused.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Problem Solver The printer sounds like it is printing, but nothing prints o With bidirectional printing, the print head prints while moving left and right. If the print head is misaligned, ruled lines may be misaligned accordingly. If vertical ruled lines are misaligned with bidirectional printing, perform Head Alignment. The print head moves, but nothing prints.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Problem Solver o Have you compared the printing result with the image on the display monitor? o Is the paper skewed? If Off is selected for Media Skew Check in the Setup menu, printing will continue even if the paper is skewed, resulting in data being printed off the paper. Select On for Paper Skew Check in the Setup menu.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Problem Solver The printed surface is scuffed or soiled. You see damage on the print surface o o Open the rear cover, and then wipe away the dust with a dry, lint-free cloth. Is the paper too thick or too thin? Check that the paper specifications are compatible with this printer.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Problem Solver o Is ink dry on the printed surface? o Depending on the printing density and media type, the ink may take a while to dry. Do not stack the paper until the printed surface is dry. Adjust the amount of enlargement for borderless printing. Margins may appear if you set the amount of enlargement to Min.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Problem Solver o Paper does not collect in the paper basket or is creased or folded when the paper basket is used. Is the paper wrinkled or creased? Do not use old paper or paper with creases in it. Always use new paper. o Is the paper damp? o Do not use paper that is damp. Also, Epson special media should be left in the bag until you intend to use it.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Problem Solver Important: c Other than when you are removing paper jams, do not touch the print head. If you touch the print head with your hand, static electricity may cause a malfunction. D Cut the top portion of any torn or crinkled areas using a commercially available cutter. E After removing the any torn or crinkled area, press the Z button and close the printer cover. F Remove the cut paper.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Problem Solver G After removing the paper, press the Z button. Reload the paper and resume printing. D Cut the top portion of any torn or crinkled areas using a commercially available cutter. U “Attaching the Roll Paper Adapter” on page 29 E After removing the any torn or crinkled area, press the Z button and close the printer cover. F Remove the cut paper.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Problem Solver The paper is not cut cleanly. o Document width is not recognized correctly Replace the cutter. If the paper is not cut cleanly, replace the cutter. o U “Replacing the Cutter” on page 186 The rollers or glass surface of the MFP Scanner may be soiled. Turn off the printer and open the scanner cover, and then clean the rollers and glass surface. A light is visible inside the printer.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Problem Solver Black or white horizontal stripes or uneven colors appear in copied/ scanned images o B Align the right edge with the loading guide so that calibration sheet is loaded from the black side. C Insert the calibration sheet horizontally until its edge touches the inner roller. The rollers of the MFP Scanner may be soiled.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Problem Solver D After the calibration sheet has been loaded, remove the loading guide. B Use the d/u buttons to select Feed Adjust and press the Z button. C An adjustment setting screen will be displayed. Press the d/u buttons to display the target adjustment value, and then press the Z button. The following section shows how the adjustment values are calculated.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Appendix Appendix Options and Consumable Products The following options and consumable products are available for use with your printer. (As of January, 2014) For the latest information, see the Epson Web site.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Appendix Product Part number Explanation Roll Paper Belt C12C890121 This holder keeps roll paper from unrolling after it is removed from the printer. U “Removing Roll paper or Roll 1” on page 36 Hard Disk Unit C12C848031 Use U “Saving to and Reprinting on the Optional Hard Disk Unit” on page 69 Auto Take-up Reel Unit C12C815321 For the SC-T7200 Series only.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Appendix Supported Media We recommend you use the following Epson special media for high-quality printing results. Note: For information about the media types and appropriate settings for printing on paper other than Epson special media or when using raster image processing (RIP) software, see the documentation supplied with the paper, or contact the dealer of the paper or the manufacturer of the RIP.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Appendix ICC profile: EPSON SCT3000_5000_7000_Series Premium Semigloss Photo Paper 250.icc Take-up Size Borderless Head Alignment Enlarged F B 406mm/16" - 610mm/24" 914mm/36"*1 ✓ ✓ ✓ ✓ ✓ 1118mm/44"*2 *1 SC-T3200 Series is not supported *2 SC-T7200 Series/SC-T7200D Series only are supported Premium Luster Photo Paper (260) Paper thickness: 0.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series Appendix Take-up Size Borderless Head Alignment Enlarged F B 406mm/16" - 610mm/24" 914mm/36"*1 ✓ ✓ ✓ ✓ ✓ 1118mm/44"*2 *1 SC-T3200 Series is not supported *2 SC-T7200 Series/SC-T7200D Series only are supported Photo Paper Gloss 250 Paper thickness: 0.25 mm Roll core size: 3 inches ICC profile: EPSON SCT3000_5000_7000_Series Photo Paper Gloss 250.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series Appendix Take-up Size Borderless Head Alignment Enlarged F 420mm(A2) B - 610mm/24" 914mm/36"*1 ✓ ✓ ✓ ✓ ✓ 1118mm/44"*2 *1 SC-T3200 Series is not supported *2 SC-T7200 Series/SC-T7200D Series only are supported Premium Semigloss Photo Paper (170) Paper thickness: 0.18 mm Roll core size: 2 inches ICC profile: EPSON SCT3000_5000_7000_Series Premium Semigloss Photo Paper 170.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Appendix Take-up Size Borderless Head Alignment Enlarged F B 432mm/17" 610mm/24" 914mm/36"*1 ✓ ✓*3 ✓ - - 1118mm/44"*2 *1 SC-T3200 Series is not supported *2 SC-T7200 Series/SC-T7200D Series only are supported *3 Borderless printing available, but borders may appear or print quality decline due to paper expanding or contracting. Doubleweight Matte Paper Paper thickness: 0.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Appendix Take-up Size Borderless Head Alignment Enlarged F B 432mm/17" 610mm/24" 914mm/36"*1 ✓ ✓*3 - - ✓ 1118mm/44"*2 *1 SC-T3200 Series is not supported *2 SC-T7200 Series/SC-T7200D Series only are supported *3 Use the tensioner supplied with the optional auto take-up reel unit Enhanced Synthetic Paper Paper thickness: 0.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Appendix *2 Borderless printing available, but borders may appear or print quality decline due to paper expanding or contracting. Cut sheet Borderless printing with cut sheets can only be performed with no left and right margins. Premium Glossy Photo Paper Thickness: 0.27 mm ICC Profile: EPSON SC-T3000_5000_7000_Series Premium Glossy Photo Paper.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Appendix Size Borderless Head Alignment Enlarged*2 ✓*1 Super B A2 - ✓ ✓ ✓*1 US-C *1 Borderless printing available, but borders may appear or print quality decline due to paper expanding or contracting. *2 Load the cut sheet, and then perform a copy operation. Archival Matte Paper/Enhanced Matte Paper Thickness: 0.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series Appendix ICC Profile: EPSON SC-T3000_5000_7000_Series Enhanced Matte Poster Board.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Appendix Usable Commercially Available Paper Size Available width for borderless printing This printer supports the following paper specifications for non-Epson media. 254 mm/10 inch 300 mm/11.8 inch Super A3/B/329 mm 406 mm/16 inch 17 inch B2/515 mm c ❏Important: Do not use paper that is wrinkled, scuffed, torn, A1/594 mm 610 mm/24 inch or dirty.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Appendix Before printing on non-Epson media Note: ❏ Be sure to check the paper characteristics such as paper tension, ink fixating, or paper thickness before setting the custom paper. For the paper's characteristics, check the paper's documentation or with your local dealer. When using non-Epson media (Custom Paper), make the paper configuration according to the paper characteristics before printing.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Appendix D Notes When Moving or Transporting the Printer When the optional MFP stand is attached, pull up and fix the fall prevention fixture of the stand. This section describes precaution when moving and transporting the product. Notes When Moving the Printer This section assumes that the product is being moved to another location on the same floor without traversing stairs, ramps, or lifts.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Appendix F Move the printer. !Caution: ❏ The printer is heavy. When you pack or move the printer, use two or more people for the SC-T3200 Series and four or more people for the SC-T7200 Series/SC-T7200D Series/ SC-T5200 Series/SC-T5200D Series when carrying it. Important: c Use the casters on the dedicated printer stand only to move the printer indoors a short distance over a level floor.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Appendix SC-T3200 Series System Requirements A System Requirements of the Printer Driver B The following chart shows the system requirements to install and use the printer driver included with this printer. For information on supported operating systems, see the Epson website.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Appendix Available hard disk space 32 GB or more Display resolution WXGA (1280 x 800) or higher resolution Interface Specifications Table Printer Specifications Hi-Speed USB-Compatible with the USB 2.0 Specification.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Appendix Printer Specifications Temperature Printer Specifications Operating: 10 to 35 ˚C (50 to 95oF) Operation temperature/humidity (when the hard disk unit or Adobe PostScript 3 Expansion Unit has not been con‐ nected) Storage (before unpacking): -20 to 60 ˚C (-4 to 140oF) (within 120 hours at 60 ˚C (140oF), within a month at 40 ˚C (104oF) Storage (after unpacking): -20 to 40 ˚C (-4 to 104 oF) (within a
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Appendix Printer Specifications Weight*3 c ❏Important: We recommend that you remove and shake SC-T7200 Series: Approximately 92 kg the installed ink cartridges once every three months to ensure print quality. SC-T5200 Series: Approximately 84 kg ❏ The ink freezes if left at below -20˚C for a long time. If it does freeze, leave it at room temperature (25˚C) for at least four hours (without condensation).
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Appendix EMC MFP Scanner specifications FCC part 15 subpart B Class B In use Approximately 50 W CAN/CSA-CEI/IEC CISPR 22 Class B Ready mode Approximately 25 W AS/NZS CISPR 22 Class B Sleep mode/ power off 0.5 W or less EMC Directive 2004/108/EC EN 55022 Class B EN 55024 EN 61000-3-2 Standards and Approvals EN 61000-3-3 SC-T7200D Series/SC-T5200D Series Safety UL 60950-1 CSA C22.2 No.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Where To Get Help Where To Get Help Contacting Epson Support Technical Support Web Site Before Contacting Epson If your Epson product is not operating properly and you cannot solve the problem using the troubleshooting information in your product documentation, contact Epson support services for assistance.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Where To Get Help Help for Users in North America Help for Users in Europe Epson provides the technical support services listed below. Check your Pan-European Warranty Document for information on how to contact Epson support. Internet Support Help for Users in Taiwan Visit Epson’s support website at http://epson.com/ support and select your product for solutions to common problems.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Where To Get Help Telephone number Fax number Address Your Dealer 03-4393119 03-4396589 5F., No.2, Nandong Rd., Pingzhen City, Taoyuan County 32455, Taiwan (R.O.C.) Don’t forget that your dealer can often help identify and resolve problems. The dealer should always be the first call for advise on problems; they can often solve problems quickly and easily as well as give advise on the next step to take.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Where To Get Help Service Center: World Wide Web (http://www.epson.com.sg) Information on product specifications, drivers for download, Frequently Asked Questions (FAQ), Sales Enquiries, and Technical Support via e-mail are available.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Where To Get Help Yogyakarta Hotel Natour Garuda Jl. Malioboro No. 60 Yogyakarta Help for Users in Malaysia Contacts for information, support, and services are: Phone: (62) 274-565478 Medan World Wide Web (http://www.epson.com.my) Wisma HSBC 4th floor Jl. Diponegoro No.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Where To Get Help Information on product specifications, drivers for download, Frequently Asked Questions (FAQ), and E-mail Enquiries are available.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Software License Terms Software License Terms OPEN SOURCE SOFTWARE LICENSE 1) This printer product includes open source software programs listed in Section 5) according to the license terms of each open source software program.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Software License Terms This printer product includes the open source software program “Bonjour” which apply the Apache License Version2.0 (“Apache License Program”). Bonjour License This printer product includes the open source software program “Bonjour” which applies the terms and conditions provided by owner of the copyright to the “Bonjour”.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Software License Terms These Bonjour Programs are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. The Apple Public Source License Version1.2 is as follows. You also can see the Apple Public Source License Version1.2 at http://www.opensource.apple.com/apsl/. APPLE PUBLIC SOURCE LICENSE Version 2.0 - August 6, 2003 1. General; Definitions.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Software License Terms 2. Permitted Uses; Conditions & Restrictions. Subject to the terms and conditions of this License, Apple hereby grants You, effective on the date You accept this License and download the Original Code, a world-wide, royalty-free, non-exclusive license, to the extent of Apple's Applicable Patent Rights and copyrights covering the Original Code, to do the following: 2.1 Unmodified Code.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Software License Terms 4. Larger Works. You may create a Larger Work by combining Covered Code with other code not governed by the terms of this License and distribute the Larger Work as a single product. In each such instance, You must make sure the requirements of this License are fulfilled for the Covered Code or any portion thereof. 5. Limitations on Patent License.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Software License Terms 10. Trademarks. This License does not grant any rights to use the trademarks or trade names "Apple", "Apple Computer", "Mac", "Mac OS", "QuickTime", "QuickTime Streaming Server" or any other trademarks, service marks, logos or trade names belonging to Apple (collectively "Apple Marks") or to any trademark, service mark, logo or trade name belonging to any Contributor.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Software License Terms 13.4 Waiver; Construction. Failure by Apple or any Contributor to enforce any provision of this License will not be deemed a waiver of future enforcement of that or any other provision. Any law or regulation which provides that the language of a contract shall be construed against the drafter will not apply to this License. 13.5 Severability.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide Software License Terms Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois, Jean-loup Gailly, Hunter Goatley, Ed Gordon, Ian Gorman, Chris Herborth, Dirk Haase, Greg Hartwig, Robert Heath, Jonathan Hudson, Paul Kienitz, David Kirschbaum, Johnny Lee, Onno van der Linden, Igor Mandrichenko, Steve P.