Operator`s manual

2-7

Removing remaining paper

1. Press the switch to back up the paper. Turn off the power.

2. Unfasten screws A and push back B (for both right and left) shown below to remove the

printer cover.

Paper

Paper Cover

Printer cover

Screw

3. Swing out the paper cover by 100° to 120° then lift it from the right-hand side to remove it

from the printer.

4. Referring to the figure above, lift the paper bail C. As shown in the figure which follows,

remove the roll paper stay D and then take out the roll paper.

Loading new roll paper

5. Insert the roll bar into the roll paper from the left side. Set the roll paper to the roll paper

cradle.

Roll Paper

Roll Paper Cradle

Type : A21PLYW

Code No.: 000-134-903

Type :

T-214whiteOKFIP

Code No.: 000-119-433

Select either.

(no carbon)

Roll Bar

P. PARK