User's Guide NPD5907-00 EN
User's Guide Copyright Copyright No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information herein.
User's Guide Trademarks Trademarks ❏ EPSON is a registered trademark, and EPSON EXCEED YOUR VISION or EXCEED YOUR VISION is a trademark of Seiko Epson Corporation. ® ❏ PRINT Image Matching™ and the PRINT Image Matching logo are trademarks of Seiko Epson Corporation. Copyright © 2001 Seiko Epson Corporation. All rights reserved. ❏ Epson Scan 2 software is based in part on the work of the Independent JPEG Group. ❏ libtiff Copyright © 1988-1997 Sam Leffler Copyright © 1991-1997 Silicon Graphics, Inc.
User's Guide Contents Contents Restoring the Network Settings from the Control Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Copyright Trademarks Loading Paper Paper Handling Precautions. . . . . . . . . . . . . . . . . . 32 Available Paper and Capacities. . . . . . . . . . . . . . . . 33 List of Paper Types. . . . . . . . . . . . . . . . . . . . . . . 34 Loading Paper in the Rear Paper Feed. . . . . . . . . . . 34 About This Manual Introduction to the Manuals. . . . . . . . . . . . .
User's Guide Contents Installing Epson iPrint. . . . . . . . . . . . . . . . . . . . 69 Scanning Using Epson iPrint. . . . . . . . . . . . . . . 69 Checking the Ink Levels. . . . . . . . . . . . . . . . . . . . . 71 Checking the Ink Levels - Windows. . . . . . . . . . .71 Checking the Ink Levels - Mac OS. . . . . . . . . . . .71 Ink Cartridge Codes. . . . . . . . . . . . . . . . . . . . . . . .71 Ink Cartridge Handling Precautions. . . . . . . . . . . .
User's Guide Contents When You Cannot Connect Using Wi-Fi Direct (Simple AP) Connection. . . . . . . . . . . . 121 Checking the SSID Connected to the Printer. . . 122 Checking the SSID for the Computer. . . . . . . . .123 Printout Problems. . . . . . . . . . . . . . . . . . . . . . . . 124 Printout is Scuffed or Color is Missing. . . . . . . .124 Banding or Unexpected Colors Appear. . . . . . . 124 Colored Banding Appears at Intervals of Approximately 2.5 cm. . . . . . . . . . . . . . . . . . . .
User's Guide About This Manual About This Manual Introduction to the Manuals The following manuals are supplied with your Epson printer. As well as the manuals, see the help included in the various Epson software applications. ❏ Start Here (paper manual) Provides you with information on setting up the printer, installing the software, using the printer, solving problems, and so on. ❏ User's Guide (digital manual) This manual.
User's Guide About This Manual Jumping directly from bookmarks Click a title to jump to that page. Click + or > to view the lower level titles in that section. To return to the previous page, perform the following operation on your keyboard. ❏ Windows: Hold down Alt, and then press ←. ❏ Mac OS: Hold down the command key, and then press ←. Printing only the pages you need You can extract and print only the pages you need.
User's Guide About This Manual Links to related sections. Descriptions Used in this Manual ❏ Screenshots of the printer driver and the Epson Scan 2 (scanner driver) screens are from Windows 10 or macOS High Sierra. The content displayed on the screens varies depending on the model and situation. ❏ Illustrations of the printer used in this manual are examples only. Although there may be slight differences depending on the model, the method of operation is the same.
User's Guide Important Instructions Important Instructions Safety Instructions Read and follow these instructions to ensure safe use of this printer. Make sure you keep this manual for future reference. Also, be sure to follow all warnings and instructions marked on the printer. ❏ Some of the symbols used on your printer are to ensure safety and proper use of the printer. Visit the following Web site to learn the meaning of the symbols. http://support.epson.
User's Guide Important Instructions Advisories and Warnings for Setting Up/Using the Printer ❏ Do not block or cover the vents and openings in the printer. ❏ Use only the type of power source indicated on the printer's label. ❏ Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch on and off. ❏ Avoid electrical outlets controlled by wall switches or automatic timers.
User's Guide Important Instructions Advisories and Warnings for Using the Printer with a Wireless Connection ❏ Radio waves from this printer may negatively affect the operation of medical electronic equipment, causing them to malfunction. When using this printer inside medical facilities or near medical equipment, follow directions from the authorized personnel representing the medical facilities, and follow all posted warnings and directions on the medical equipment.
User's Guide Printer Basics Printer Basics Part Names and Functions A Edge guide Feeds the paper straight into the printer. Slide to the edges of the paper. B Rear paper feed Loads paper. C Paper support Supports loaded paper. D Feeder guard Prevents foreign substance from entering the printer. Usually keep this guard closed. E Output tray Holds the ejected paper. F Control panel Operates the printer. A Scanner unit support Supports the scanner unit.
User's Guide Printer Basics B Ink cartridge holder Install the ink cartridges. Ink is ejected from the print head nozzles underneath. B A C A Document cover Blocks external light while scanning. B Scanner glass Place the originals. C Scanner unit Scans placed originals. Open when replacing ink cartridges or removing jammed paper inside the printer. B A A AC inlet Connects the power cord. B USB port Connects a USB cable to connect with a computer.
User's Guide Printer Basics Control Panel A B CD E F G H A I The left and right lights indicate the network status. ❏ (Green light - left): Turns on while the printer is connected to a wireless (Wi-Fi) network, or flashes while communicating. ❏ (Orange light - right): Turns on while the printer is connected to a wireless (Wi-Fi) network in Wi-Fi Direct (Simple AP) mode, or flashes while communicating. The lights flash alternately or simultaneously while initializing or making network settings.
User's Guide Printer Basics + + Press and buttons simultaneously to run software on a USB-connected computer and scan as a PDF file. While holding down the button, press the flash alternately to start PIN Code Setup (WPS). button until the light and the light + While holding down the button, press the button until the light flash alternately to start Wi-Fi Direct (Simple AP) setup. + Turn the printer on while holding down the button to restore the default network settings.
User's Guide Network Settings Network Settings Network Connection Types You can use the following connection methods. Wi-Fi Connection Connect the printer and the computer or smart device to the access point. This is the typical connection method for home or office networks where computers are connected by Wi-Fi through the access point.
User's Guide Network Settings Note: Wi-Fi Direct (Simple AP) connection is a connection method designed to replace Ad Hoc mode. The printer can be connected by Wi-Fi and Wi-Fi Direct (Simple AP) connection simultaneously. However, if you start a network connection in Wi-Fi Direct (Simple AP) connection when the printer is connected by Wi-Fi, the Wi-Fi is temporarily disconnected.
User's Guide Network Settings Select the connection type and then click Next. Follow the on-screen instructions. Connecting to a Smart Device You can use the printer from a smart device when you connect the printer to the same Wi-Fi network (SSID) as the smart device. To use the printer from a smart device, set up from the following website. Access to the website from the smart device that you want to connect to the printer. http://epson.
User's Guide Network Settings & “Making Wi-Fi Direct (Simple AP) Connection Settings” on page 21 Making Wi-Fi Settings by Push Button Setup You can automatically set up a Wi-Fi network by pressing a button on the access point. If the following conditions are met, you can set up by using this method. ❏ The access point is compatible with WPS (Wi-Fi Protected Setup). ❏ The current Wi-Fi connection was established by pressing a button on the access point.
User's Guide Network Settings & “When You Cannot Make Network Settings” on page 119 Making Wi-Fi Settings by PIN Code Setup (WPS) You can connect to an access point by using a PIN code that is printed on the network status sheet. You can use this method to set up if an access point is capable of WPS (Wi-Fi Protected Setup). Use a computer to enter a PIN code into the access point. 1. Load papers. 2. Hold down the button on the printer for at least 10 seconds. The network status sheet is printed.
User's Guide Network Settings c Important: When you connect from a computer or smart device to the printer using the Wi-Fi Direct (Simple AP) connection, the printer is connected to the same Wi-Fi network (SSID) as the computer or smart device and the communication is established between them. Since the computer or smart device is automatically connected to the other connectable Wi-Fi network if the printer is turned off, it is not connected to the previous Wi-Fi network again if the printer is turned on.
User's Guide Network Settings Note: When you connect from a smart device using Wi-Fi Direct connection (for Android) When you are using an Android device and connect to the printer using Wi-Fi Direct, the simultaneously on the printer. Press the Press the light and light flash button to allow the connection request. button if you want to reject the connection request. See Tips on the following website for more details. http://epson.
User's Guide Network Settings Messages and Solutions on the Network Connection Report Check the messages and error codes on the network connection report, and then follow the solutions. a. Error code b.
User's Guide Network Settings E-1 Message: Confirm that the network cable is connected and network devices such as hub, router, or access point are turned on. Solutions: ❏ Make sure the Ethernet cable is securely connected to your printer and to your hub or other network device. ❏ Make sure your hub or other network device is turned on. ❏ If you want to connect the printer by Wi-Fi, make Wi-Fi settings for the printer again because it is disabled.
User's Guide Network Settings ❏ If your Wi-Fi connection suddenly disconnects, check for the conditions below. If any of these conditions are applicable, reset your network settings by downloading and running the software from the following website. http://epson.sn > Setup ❏ Another smart device was added to the network using push button setup. ❏ The Wi-Fi network was set up using any method other than push button setup. E-5 Message: Security mode (e.g.
User's Guide Network Settings E-8 Message: Incorrect IP address is assigned to the printer. Confirm IP address setup of the network device (hub, router, or access point). Contact your network administrator for assistance. Solutions: ❏ Enable DHCP on the access point if the printer’s Obtain IP Address setting is set to Auto. ❏ If the printer’s Obtain IP Address setting is set to Manual, the IP address you manually set is invalid due to out of range (for example: 0.0.0.0).
User's Guide Network Settings If still does not connect your printer and network devices, turn off the access point. Wait for about 10 seconds, and then turn it on. E-11 Message: Setup is incomplete. Confirm default gateway setup. Connection using the EpsonNet Setup is available. Contact your network administrator for assistance. Solutions: Check the following. ❏ The default gateway address is correct if you set the printer's TCP/IP Setup setting to Manual.
User's Guide Network Settings E-13 Message: Confirm the following -Entered security key/password is correct -Index of the security key/password is set to the first number -Connection and network setup of the PC or other device is correct Contact your network administrator for assistance. Solutions: Check the following. ❏ Network devices such as an access point, hub, and router are turned on. ❏ The TCP/IP Setup for network devices has not been set up manually.
User's Guide Network Settings 2. Hold down the button on the printer's control panel for at least 10 seconds. The network status sheet is printed. Note: If you release the button within 10 seconds, a network connection report is printed. Replacing or Adding New Access Points If the SSID changes due to the replacement of an access point, or an access point is added and a new network environment is established, re-set the Wi-Fi settings.
User's Guide Network Settings Select Change or re-set the connection method on the Select Software Installation screen, and then click Next. Restoring the Network Settings from the Control Panel You can restore all network settings to their defaults. 1. Turn the printer off. 2. While holding down the button, press the Restoration is complete when the button until the light and the light are off. 31 light and the light flash alternately.
User's Guide Loading Paper Loading Paper Paper Handling Precautions ❏ Read the instruction sheets supplied with the paper. ❏ Fan and align the edges of the paper before loading. Do not fan or curl photo paper. Doing so may damage the printable side. ❏ If the paper is curled, flatten it or curl it slightly in the opposite direction before loading. Printing on curled paper may cause paper jams and smears on the printout.
User's Guide Loading Paper Available Paper and Capacities Epson recommends using genuine Epson paper to ensure high-quality printouts. The only paper size and paper type available for printing from the control panel are A4 size and plain paper. Genuine Epson Paper * Media Name Size Loading Capacity (Sheets) Manual 2Sided Printing Borderless Printing Epson Bright White Ink Jet Paper A4 40* ✓ – Epson Ultra Glossy Photo Paper A4, 13×18 cm (5×7 in.), 10×15 cm (4×6 in.
User's Guide Loading Paper *1 The loading capacity for pre-punched paper is one sheet. *2 For manual 2-sided printing, you can load up to 15 sheets for paper with one side already printed. Related Information & “Technical Support Web Site” on page 144 List of Paper Types To obtain optimum printing results, select the paper type that suits the paper.
User's Guide Loading Paper 2. Slide the edge guide to the left. 3. Load paper vertically along the right side of the rear paper feed with the printable side facing up. c Important: Do not load more than the maximum number of sheets specified for the paper. For plain paper, do not load above the line indicated by the triangle symbol on the edge guide.
User's Guide Loading Paper ❏ Pre-punched paper Note: ❏ Load a single sheet of paper without binding holes at the top or the bottom. ❏ Adjust the print position of your file to avoid printing over the holes. 4. Slide the edge guide to the edge of the paper, and then close the feeder guard. 5. Slide out the output tray. Note: Return the remaining paper to its package. If you leave it in the printer, the paper may curl or the print quality may decline.
User's Guide Loading Paper & “Available Paper and Capacities” on page 33 37
User's Guide Placing Originals on the Scanner Glass Placing Originals on the Scanner Glass c Important: When placing bulky originals such as books, prevent exterior light from shining directly onto the scanner glass. 1. Open the document cover. 2. Remove any dust or stains on the scanner glass. 3. Place the original face-down and slide it to the corner mark. Note: A range of 1.5 mm from the bottom edge and right edge of the scanner glass is not scanned. 4. Close the cover gently.
User's Guide Placing Originals on the Scanner Glass Placing Multiple Photos for Scanning at the Same Time You can scan multiple photos at the same time and save each image, using Photo Mode in Epson Scan 2. Place the photos 4.5 mm away from the horizontal and vertical edges of the scanner glass, and place them at least 20 mm apart from each other. The photos should be larger than 15×15 mm. Note: Enable the Thumbnail check box at the top of the preview window.
User's Guide Printing Printing Printing from a Computer Printing Basics - Windows Note: ❏ See the online help for explanations of the setting items. Right-click an item, and then click Help. ❏ Operations differ depending on the application. See the application's help for details. 1. Load paper in the printer. 2. Open the file you want to print. 3. Select Print or Print Setup from the File menu. 4. Select your printer. 5. Select Preferences or Properties to access the printer driver window. 6.
User's Guide Printing ❏ Borderless: Select to print with no margins around the image. In borderless printing, the print data is enlarged slightly more than the paper size so that no margins are printed around the edges of the paper. Click Settings to select the amount of enlargement. ❏ Orientation: Select the orientation you set in the application. ❏ Paper Type: Select the type of paper you loaded. ❏ Quality: Select the print quality.
User's Guide Printing 3. Select Print from the File menu or another command to access the print dialog. If necessary, click Show Details or d to expand the print window. 4. Make the following settings. ❏ Printer: Select your printer. ❏ Presets: Select when you want to use the registered settings. ❏ Paper Size: Select the paper size you loaded in the printer. When printing with no margins, select a "borderless" paper size. ❏ Orientation: Select the orientation you set in the application.
User's Guide Printing 5. Select Print Settings from the pop-up menu. Note: On OS X Mountain Lion or later, if the Print Settings menu is not displayed, the Epson printer driver has not been installed correctly. menu > Printers & Scanners (or Print & Scan, Print & Fax), remove the Select System Preferences from the printer, and then add the printer again. See the following to add a printer. http://epson.sn 6. Make the following settings. ❏ Media Type: Select the type of paper you loaded.
User's Guide Printing & “Guide to Mac OS Printer Driver” on page 100 & “List of Paper Types” on page 34 Printing on 2-Sides (for Windows only) The printer driver prints automatically separating even pages and odd pages. When the printer has finished printing the odd pages, flip the paper over following the instructions to print the even pages. You can also print a booklet that can be created by folding the printout. Note: ❏ This feature is not available for borderless printing.
User's Guide Printing Related Information & “Available Paper and Capacities” on page 33 & “Loading Paper in the Rear Paper Feed” on page 34 & “Printing Basics - Windows” on page 40 Printing Several Pages on One Sheet You can print two or four pages of data on a single sheet of paper. Printing Several Pages on One Sheet - Windows Note: This feature is not available for borderless printing. 1. Load paper in the printer. 2. Open the file you want to print. 3. Access the printer driver window. 4.
User's Guide Printing Printing Several Pages on One Sheet - Mac OS 1. Load paper in the printer. 2. Open the file you want to print. 3. Access the print dialog. 4. Select Layout from the pop-up menu. 5. Set the number of pages in Pages per Sheet, the Layout Direction (page order), and Border. 6. Set the other items as necessary. 7. Click Print.
User's Guide Printing ❏ Output Paper: Select the paper size you loaded in the printer. Fit to Page is selected automatically. Note: If you want to print a reduced image at the center of the page, select Center. 5. Set the other items on the Main and More Options tabs as necessary, and then click OK. 6. Click Print. Related Information & “Loading Paper in the Rear Paper Feed” on page 34 & “Printing Basics - Windows” on page 40 Printing to Fit the Paper Size - Mac OS 1. Load paper in the printer. 2.
User's Guide Printing Printing Multiple Files Together (for Windows Only) Job Arranger Lite allows you to combine several files created by different applications and print them as a single print job. You can specify the print settings for combined files, such as layout, print order, and orientation. 1. Load paper in the printer. 2. Open the file you want to print. 3. Access the printer driver window. 4. Select Job Arranger Lite on the Main tab. 5. Click OK to close the printer driver window. 6.
User's Guide Printing Printing One Image on Multiple Sheets to Create a Poster (for Windows Only) This feature allows you to print one image on multiple sheets of paper. You can create a larger poster by taping them together. Note: This feature is not available for borderless printing. 1. Load paper in the printer. 2. Open the file you want to print. 3. Access the printer driver window. 4. Select 2x1 Poster, 2x2 Poster, 3x3 Poster, or 4x4 Poster from Multi-Page on the Main tab. 5.
User's Guide Printing Making Posters Using Overlapping Alignment Marks Here is an example of how to make a poster when 2x2 Poster is selected, and Overlapping Alignment Marks is selected in Print Cutting Guides. 1. Prepare Sheet 1 and Sheet 2. Cut off the margins of Sheet 1 along the vertical blue line through the center of the top and bottom cross marks.
User's Guide Printing 2. Place the edge of Sheet 1 on top of Sheet 2 and align the cross marks, then temporarily tape the two sheets together from the back. 3. Cut the taped sheets in two along the vertical red line through the alignment markers (this time, the line to the left of the cross marks).
User's Guide Printing 4. Tape the sheets together from the back. 5. Repeat steps 1 to 4 to tape Sheet 3 and Sheet 4 together. 6. Cut off the margins of Sheet 1 and Sheet 2 along the horizontal blue line through the center of the left and right side cross marks.
User's Guide Printing 7. Place the edge of Sheet 1 and Sheet 2 on top of Sheet 3 and Sheet 4 and align the cross marks, and then temporarily tape them together from the back.
User's Guide Printing 8. Cut the taped sheets in two along the horizontal red line through the alignment markers (this time, the line above the cross marks). 9. Tape the sheets together from the back.
User's Guide Printing 10. Cut off the remaining margins along the outer guide. Printing Using Advanced Features This section introduces a variety of additional layout and printing features available on the printer driver. Related Information & “Windows Printer Driver” on page 96 & “Mac OS Printer Driver” on page 99 Adding a Printing Preset to Print Easily If you create your own preset of frequently used print settings on the printer driver, you can print easily by selecting the preset from the list.
User's Guide Printing Windows To add your own preset, set items such as the Document Size and Paper Type on the Main or More Options tab, and then click Add/Remove Presets in Printing Presets. Note: To delete an added preset, click Add/Remove Presets, select the preset name you want to delete from the list, and then delete it. Mac OS Access the print dialog. To add your own preset, set items such as the Paper Size and Media Type, and then save the current settings as the preset in the Presets setting.
User's Guide Printing If you select Automatic, the colors are automatically adjusted to match the paper type and print quality settings. If you select Custom and click Advanced, you can make your own settings. Mac OS Access the print dialog. Select Color Matching from the pop-up menu, and then select EPSON Color Controls. Select Color Options from the pop-up menu, and then select one of the available options. Click the arrow next to Advanced Settings and make the appropriate settings.
User's Guide Printing Printing from Smart Devices Using Epson iPrint Epson iPrint is an application that allows you to print photos, documents, and web pages from a smart device such as a smartphone or tablet. You can use local print, printing from a smart device that is connected to the same wireless network as your printer, or remote print, printing from a remote location over the Internet. To use remote print, register your printer in the Epson Connect service.
User's Guide Printing The following screens are subject to change without notice. The contents may vary depending on the product. A Home screen displayed when the application is started. B Displays information on how to setup the printer and a FAQ. C Displays the screen where you can select the printer and make printer settings. Once you have selected the printer, you do not need to select it again from the next time. D Select what you want to print such as photos and documents.
User's Guide Printing Canceling Printing - Printer Button Press the y button to cancel the print job in progress. Canceling Printing - Windows 1. Access the printer driver window. 2. Select the Maintenance tab. 3. Click Print Queue. 4. Right-click on the job you want to cancel and then select Cancel. Related Information & “Windows Printer Driver” on page 96 Canceling Printing - Mac OS 1. Click the printer icon in the Dock. 2. Select the job you want to cancel. 3. Cancel the job.
User's Guide Copying Copying Copying Basics You can copy on A4-size paper at the same magnification. Margins with a width of 3 mm appear around the edges of the paper regardless of whether or not the original has margins around the edges of the paper. When copying originals smaller than A4-size, margins will be wider than 3 mm depending on the position where you place the original. 1. Load A4-size paper in the printer. 2. Place the originals. 3. Press the or button.
User's Guide Scanning Scanning Scanning from the Control Panel You can save the scanned image in PDF format to a computer which is connected to the printer with a USB cable. c Important: Make sure you have installed Epson Scan 2 and Epson Event Manager on your computer before using this feature. 1. Place the originals. 2. Press the button and the button simultaneously. Note: ❏ You can change the scan settings such as the scanning size, folder to save, or save format, by using Epson Event Manager.
User's Guide Scanning 4. Make the following settings on the Main Settings tab. ❏ Document Size: Select the size of the original you placed. ❏ / (Original orientation) buttons: Select the set orientation of the original you placed. Depending on the size of the original, this item may be set automatically and cannot be changed. ❏ Image Type: Select the color for saving the scanned image. ❏ Resolution: Select the resolution. Note: ❏ The Document Source setting is fixed as Scanner Glass.
User's Guide Scanning ❏ On the Advanced Settings tab, you can make detailed image adjustment settings that are suitable for text documents, such as the following. ❏ Remove Background: Remove the background of the originals. ❏ Text Enhancement: You can make blurred letters in the original clear and sharp. ❏ Auto Area Segmentation: You can make letters clear and images smooth when performing black and white scanning for a document that contains images.
User's Guide Scanning 6. Set the file saving settings. ❏ Image Format: Select the save format from the list. You can make detailed settings for each save format except BITMAP and PNG. Select Options from the list after selecting the save format. ❏ File Name: Confirm the save file name displayed. You can change settings for the file name by selecting Settings from the list. ❏ Folder: Select the save folder for the scanned image from the list.
User's Guide Scanning 2. Start Epson Scan 2. 3. Select Photo Mode from the Mode list. 4. Make the following settings on the Main Settings tab. ❏ Image Type: Select the color for saving the scanned image. ❏ Resolution: Select the resolution. Note: The Document Source setting is fixed as Scanner Glass, and the Document Type setting is fixed as Reflective. (Reflective means originals which are not transparent, for example ordinary papers or photos.) You cannot change these settings.
User's Guide Scanning 5. Click Preview. The preview window opens, and the previewed images are displayed as thumbnails. Note: To preview the entire scanned area, clear the Thumbnail check box at the top of the preview widow. 6. Confirm the preview, and make image adjustment settings on the Advanced Settings tab if necessary.
User's Guide Scanning You can adjust the scanned image using detailed settings that are suitable for photos or pictures, such as the following. ❏ Brightness: You can adjust the brightness for the scanned image. ❏ Contrast: You can adjust the contrast for the scanned image. ❏ Saturation: You can adjust the saturation (color vividness) for the scanned image. ❏ Unsharp Mask: You can enhance and sharpen the outlines of the scanned image.
User's Guide Scanning ❏ Folder: Select the save folder for the scanned image from the list. You can select another folder or create a new folder by selecting Select from the list. 8. Click Scan.
User's Guide Scanning The following screens are subject to change without notice. A Home screen displayed when the application is started. B Displays information on how to setup the printer and a FAQ. C Displays the screen where you can select the printer and make printer settings. Once you have selected the printer, you do not need to select it again from the next time. D Displays the scanning screen. E Displays the screen where you can make scan settings such as resolution.
User's Guide Replacing Ink Cartridges Replacing Ink Cartridges Checking the Ink Levels You can check the approximate ink levels from the computer. Checking the Ink Levels - Windows 1. Access the printer driver window. 2. Click Ink Levels on the Main tab. Note: If EPSON Status Monitor 3 is disabled, the ink levels are not displayed. Click Extended Settings on the Maintenance tab, and then select Enable EPSON Status Monitor 3.
User's Guide Replacing Ink Cartridges * "XL" indicates a large cartridge. Note: ❏ Not all cartridges are available in all regions. ❏ Ink cartridge codes may vary by location. For the correct codes in your area, contact Epson support. ❏ For users in Europe, visit the following website for information on Epson's ink cartridge yields. http://www.epson.
User's Guide Replacing Ink Cartridges ❏ Do not remove the transparent seal from the bottom of the cartridge; otherwise, the cartridge may become unusable. ❏ Do not touch the sections shown in the illustration. Doing so may prevent normal operation and printing. ❏ Install all ink cartridges; otherwise you cannot print. ❏ Do not replace ink cartridges with the power off. Do not move the print head by hand; otherwise, you may damage the printer.
User's Guide Replacing Ink Cartridges ❏ To ensure you receive premium print quality and to help protect your print head, a variable ink safety reserve remains in the cartridge when your printer indicates to replace the cartridge. The yields quoted for you do not include this reserve. ❏ Although the ink cartridges may contain recycled materials, this does not affect printer function or performance.
User's Guide Replacing Ink Cartridges 1. Open the scanner unit with the document cover closed. 2. Operate the printer's buttons to move the ink cartridge holder. Note: Replace the cartridge that stops at the icon. If there are more expended ink cartridges, the cartridge moves to the icon every time you press the y button. ❏ If the B light is on (one or more ink cartridges are expended) Press the y button. The ink cartridge holder moves to the position. Go to the next step. icon.
User's Guide Replacing Ink Cartridges 3. Press the y button again. The ink cartridge holder moves to the replacement position. 4. When replacing the black ink cartridge, gently shake the new black ink cartridge four or five times and then remove it from its package. When replacing other color cartridges, remove the new color cartridges from their package without shaking. c Important: Do not shake cartridges after opening the package, as they may leak. 5. Remove only the yellow tape.
User's Guide Replacing Ink Cartridges c Important: Do not touch the sections shown in the illustration. Doing so may prevent normal operation and printing. 6. Squeeze the tab on the ink cartridge and pull it straight up. If you cannot remove the ink cartridge, pull it firmly. 7. Insert the new ink cartridge, and then press it down firmly.
User's Guide Replacing Ink Cartridges 8. Close the scanner unit. 9. Press the y button. Ink charging starts. c Important: After installing the ink cartridge, the power light continues to flash while the printer is charging ink. Do not turn off the printer during ink charging. Charging takes approximately two minutes. If the ink charging is incomplete, you may not be able to print. Note: If the B light does not turn off, try removing and reinserting the ink cartridge.
User's Guide Replacing Ink Cartridges 1. Open the scanner unit with the document cover closed. 2. Hold down the y button until the ink cartridge holder starts moving. The ink cartridge holder moves to the replacement position. Note: To cancel ink cartridge replacement, keep the ink cartridges installed and turn off the printer. 3. When replacing the black ink cartridge, gently shake the new black ink cartridge four or five times and then remove it from its package.
User's Guide Replacing Ink Cartridges c Important: Do not shake cartridges after opening the package, as they may leak. 4. Remove only the yellow tape. c Important: Do not touch the sections shown in the illustration. Doing so may prevent normal operation and printing.
User's Guide Replacing Ink Cartridges 5. Squeeze the tab on the ink cartridge and pull it straight up. If you cannot remove the ink cartridge, pull it firmly 6. Insert the new ink cartridge, and then press it down firmly. 7. Close the scanner unit. 8. Press the y button. Ink charging starts.
User's Guide Replacing Ink Cartridges c Important: After installing the ink cartridge, the power light continues to flash while the printer is charging ink. Do not turn off the printer during ink charging. Charging takes approximately two minutes. If the ink charging is incomplete, you may not be able to print. Note: If the B light does not turn off, try removing and reinserting the ink cartridge.
User's Guide Replacing Ink Cartridges Temporarily Printing with Black Ink - Windows 1. When the following window is displayed, cancel printing. Note: If you cannot cancel printing from the computer, cancel using the printer's control panel. 2. Access the printer driver window. 3. Clear Borderless on the Main tab. 4. Select plain papers or Envelope as the Paper Type setting on the Main tab.
User's Guide Replacing Ink Cartridges 5. Select Grayscale. 6. Set the other items on the Main and More Options tabs as necessary, and then click OK. 7. Click Print. 8. Click Print in Black in the window displayed. Related Information & “Loading Paper in the Rear Paper Feed” on page 34 & “Printing Basics - Windows” on page 40 Temporarily Printing with Black Ink - Mac OS Note: To use this feature through a network, connect with Bonjour. 1. Click the printer icon in the Dock. 2. Cancel the job.
User's Guide Replacing Ink Cartridges Conserving Black Ink when the Black Ink Is Low (for Windows Only) When black ink is running low and there is enough color ink remaining, you can use a mixture of color inks to create black. You can continue printing while preparing a replacement black ink cartridge. This feature is only available when you select the following settings in the printer driver.
User's Guide Maintaining the Printer Maintaining the Printer Checking and Cleaning the Print Head If the nozzles are clogged, the printouts become faint, there is visible banding, or unexpected colors appear. When print quality has declined, use the nozzle check feature and check if the nozzles are clogged. If the nozzles are clogged, clean the print head. c Important: ❏ Do not open the scanner unit or turn off the printer during head cleaning.
User's Guide Maintaining the Printer 4. Examine the printed pattern. If there are broken lines or missing segments as shown in the "NG" pattern, the print head nozzles may be clogged. Go to the next step. If you cannot see any broken lines or missing segments as in the following "OK" pattern, the nozzles are not clogged. Print head cleaning is not necessary. 5. Hold the y button down for three seconds until the power light starts flashing. Print head cleaning starts.
User's Guide Maintaining the Printer 2. Select System Preferences from the then select the printer. menu > Printers & Scanners (or Print & Scan, Print & Fax), and 3. Click Options & Supplies > Utility > Open Printer Utility. 4. Click Nozzle Check. 5. Follow the on-screen instructions. Related Information & “Loading Paper in the Rear Paper Feed” on page 34 Aligning the Print Head If you notice a misalignment of vertical lines or blurred images, align the print head.
User's Guide Maintaining the Printer Cleaning the Paper Path When the printouts are smeared or scuffed, clean the roller inside. c Important: Do not use tissue paper to clean the inside of the printer. The print head nozzles may be clogged with lint. 1. Make sure there is no dust or stains on the scanner glass and the document cover. 2. Load A4-size plain paper in the printer. 3. Start copying without placing an original on the scanner glass. The paper is ejected from the printer. 4.
User's Guide Maintaining the Printer 2. Use a soft, dry, clean cloth to clean the surface of the scanner glass. c Important: ❏ If the glass surface is stained with grease or some other hard-to-remove material, use a small amount of glass cleaner and a soft cloth to remove it. Wipe off all remaining liquid. ❏ Do not press the glass surface too hard. ❏ Be careful not to scratch or damage the surface of the glass. A damaged glass surface can decrease the scan quality.
User's Guide Maintaining the Printer 3. Check if the translucent film is smeared. Smears are easier to see if you use a light. If there are smears (such as finger marks or grease) on the translucent film (A), go to the next step. A: Translucent film B: Rail c Important: Be careful not to touch the rail (B). Otherwise, you may not be able to print. Do not wipe off the grease on the rail, because this is necessary for operations. 4.
User's Guide Maintaining the Printer c Important: Wife off the smear gently. If you press the cotton swab too hard to the film, the springs of the film may be dislocated and the printer may be damaged. 5. Use a new dry cotton swab to wipe the film. c Important: Do not leave any fibers on the film. Note: To prevent the smear from spreading, frequently replace the cotton swab with a new one. 6. Repeat steps 4 and 5 until the film is not smeared. 7. Visually check that the film is not smeared.
User's Guide Maintaining the Printer 4. Select the time period before the printer enters sleep mode as the Sleep Timer setting, and click Apply. To make the printer turn off automatically, select the time period as the Power Off Timer setting, and click Apply.
User's Guide Network Service and Software Information Network Service and Software Information This section introduces the network services and software products available for your printer from the Epson website or the supplied software disc. Epson Connect Service By using Epson Connect service available on the Internet, you can print from your smartphone, tablet PC, or laptop, anytime and practically anywhere. The features available on the Internet are as follows.
User's Guide Network Service and Software Information Running Web Config on a Web Browser 1. Check the printer's IP address. button for at least 10 seconds to print the network status sheet, and then check the Hold down the printer's IP address. 2. Launch a Web browser from a computer or smart device, and then enter the printer's IP address. Format: IPv4: http://the printer's IP address/ IPv6: http://[the printer's IP address]/ Examples: IPv4: http://192.168.100.
User's Guide Network Service and Software Information 2. Click Options & Supplies> Show Printer Webpage. Windows Printer Driver The printer driver controls the printer according to the commands from an application. Making settings on the printer driver provides the best printing results. You can also check the status of the printer or keep it in top operating condition using the printer driver utility. Note: You can change the language of the printer driver.
User's Guide Network Service and Software Information Starting the utility Access the printer driver window. Click the Maintenance tab. Guide to Windows Printer Driver Help is available in the printer driver for Windows. To view explanations of the setting items, right-click on each item, and then click Help. Main Tab You can make basic settings for printing, such as paper type or paper size. You can also make settings for printing both sides of the paper or printing multiple pages on one sheet.
User's Guide Network Service and Software Information More Options Tab You can select additional layout and printing options such as changing the size of a printout or making color corrections.
User's Guide Network Service and Software Information Maintenance Tab You can run maintenance features such as nozzle check and print head cleaning, and by starting EPSON Status Monitor 3, you can check printer status and error information. Making Operation Settings for the Windows Printer Driver You can make settings such as enabling EPSON Status Monitor 3. 1. Access the printer driver window. 2. Click Extended Settings on the Maintenance tab. 3. Make the appropriate settings, and then click OK.
User's Guide Network Service and Software Information Accessing the printer driver from applications Click Page Setup or Print on the File menu of your application. If necessary, click Show Details (or d) to expand the print window. Note: Depending on the application being used, Page Setup may not be displayed in the File menu, and the operations for displaying the print screen may differ. See the application's help for details.
User's Guide Network Service and Software Information Pop-up Menu Descriptions Color Options When you select EPSON Color Controls from the Color Matching menu, you can select a color correction method. Note: On OS X Mountain Lion or later, if Print Settings menu is not displayed, Epson printer driver has not been installed correctly. menu > Printers & Scanners (or Print & Scan, Print & Fax), remove the printer, Select System Preferences from the and then add the printer again.
User's Guide Network Service and Software Information Making Operation Settings for the Mac OS Printer Driver Accessing the Operation Settings Window of the Mac OS Printer Driver Select System Preferences from the menu > Printers & Scanners (or Print & Scan, Print & Fax), and then select the printer. Click Options & Supplies > Options (or Driver). Operation Settings of the Mac OS Printer Driver ❏ Skip Blank Page: Avoids printing blank pages.
User's Guide Network Service and Software Information Select Go > Applications > Epson Software > Epson Scan 2. Related Information & “Installing Applications” on page 107 Epson Event Manager Epson Event Manager is an application that allows you to manage scanning from the control panel and save images to a computer. You can add your own settings as presets, such as the document type, the save folder location, and the image format. See the application's help for details.
User's Guide Network Service and Software Information Starting on Mac OS Select Go > Applications > Epson Software > Epson Easy Photo Print. Related Information & “Installing Applications” on page 107 E-Web Print (for Windows Only) E-Web Print is an application that allows you to easily print web pages with various layouts. See the application's help for details. You can access the help from the E-Web Print menu on the E-Web Print tool bar.
User's Guide Network Service and Software Information EPSON Software Updater EPSON Software Updater is an application that checks for new or updated software on the internet and installs it. You can also update the printer's firmware and manual. Starting on Windows ❏ Windows 10 Click the start button, and then select Epson Software > EPSON Software Updater. ❏ Windows 8.1/Windows 8 Enter the application name in the search charm, and then select the displayed icon.
User's Guide Network Service and Software Information 4. Open Uninstall a program (or Add or Remove Programs): ❏ Windows 10/Windows 8.1/Windows 8/Windows 7/Windows Vista Select Uninstall a program in Programs. ❏ Windows XP Click Add or Remove Programs. 5. Select the application you want to uninstall. 6. Uninstall the applications: ❏ Windows 10/Windows 8.1/Windows 8/Windows 7/Windows Vista Click Uninstall/Change or Uninstall. ❏ Windows XP Click Change/Remove or Remove.
User's Guide Network Service and Software Information Installing Applications Connect your computer to the network and install the latest version of applications from the website. Note: ❏ Log on to your computer as an administrator. Enter the administrator password if the computer prompts you. ❏ When reinstalling an application, you need to uninstall it first. 1. Quit all running applications. 2. When installing the printer driver or Epson Scan 2, disconnect the printer and the computer temporarily.
User's Guide Solving Problems Solving Problems Checking the Printer Status Checking the Error Indicators on the Printer When an error occurs, the light turns on or flashes. Details of the error are displayed on the computer screen. : On : Flashing slowly : Flashing fast Light Situation Solutions No paper is loaded or more than one sheet has been fed at a time. Load paper and press the or button. A paper jam has occurred. Remove the paper and press the button.
User's Guide Solving Problems Light Situation Solutions A printer error has occurred. Open the scanner unit and remove any paper or protective material inside the printer. Turn the power off and on again. If the error continues to occur after turning the power off and on again, contact Epson support. A Wi-Fi connection error has occurred. Press the button to clear the error and try again. The printer has started in recovery mode because the firmware update failed.
User's Guide Solving Problems 2. Click EPSON Status Monitor 3 on the Maintenance tab. Note: ❏ You can also check the printer status by double-clicking the printer icon on the taskbar. If the printer icon is not added to the taskbar, click Monitoring Preferences on the Maintenance tab, and then select Register the shortcut icon to the taskbar. ❏ If EPSON Status Monitor 3 is disabled, click Extended Settings on the Maintenance tab, and then select Enable EPSON Status Monitor 3.
User's Guide Solving Problems Removing Jammed Paper from the Rear Paper Feed Remove the jammed paper. Removing Jammed Paper from the Output Tray Remove the jammed paper. Removing Jammed Paper from Inside the Printer ! Caution: ❏ Be careful not to trap your hand or fingers when opening or closing the scanner unit. Otherwise you may be injured. ❏ Never touch the buttons on the control panel while your hand is inside the printer. If the printer starts operating, it could cause an injury.
User's Guide Solving Problems 1. Open the scanner unit with the document cover closed. 2. Remove the jammed paper. c Important: Do not touch the white flat cable or translucent film inside the printer. Doing so may cause a malfunction.
User's Guide Solving Problems 3. Close the scanner unit. Paper Does Not Feed Correctly Check the following points, and then take the appropriate actions to solve the problem. ❏ Place the printer on a flat surface and operate in the recommended environmental conditions. ❏ Use paper supported by this printer. ❏ Follow the paper handling precautions. ❏ Do not load more than the maximum number of sheets specified for the paper.
User's Guide Solving Problems Paper Feeds at a Slant Load paper in the correct direction, and slide the edge guides against the edges of the paper. Related Information & “Loading Paper in the Rear Paper Feed” on page 34 Several Sheets of Paper are Fed at a Time ❏ Load one sheet of paper at a time. ❏ When several sheets of paper are fed at a time during manual 2-sided printing, remove any paper which is loaded in the printer before you reload the paper.
User's Guide Solving Problems ❏ If the printer cannot print using a USB connection, try the following. Disconnect the USB cable from the computer. Right-click on the printer icon displayed on the computer, and then select Remove Device. Next, connect the USB cable to the computer and try a test print. Re-set the USB connection by following the steps in this manual for changing the connection method to a computer. See the related information link below for details.
User's Guide Solving Problems Checking the Software and Data ❏ Make sure that a genuine Epson printer driver is installed. If a genuine Epson printer driver is not installed, the available functions are limited. We recommend using a genuine Epson printer driver. See the related information link below for details. ❏ If you are printing a large data size image, the computer may run out of memory. Print the image at a lower resolution or a smaller size.
User's Guide Solving Problems Click the Driver tab. If your printer name is displayed in the list, a genuine Epson printer driver is installed on your computer. Mac OS menu > Printers & Scanners (or Print & Scan, Print & Fax), and then Select System Preferences from the select the printer. Click Options & Supplies, and if the Options tab and Utility tab are displayed on the window, a genuine Epson printer driver is installed on your computer.
User's Guide Solving Problems Checking the Printer Status from the Computer (Windows) Click Print Queue on the printer driver's Maintenance tab, and then check the following. ❏ Check if there are any paused print jobs. If unnecessary data remains, select Cancel all documents from the Printer menu. ❏ Make sure the printer is not offline or pending. If the printer is offline or pending, clear the offline or pending setting from the Printer menu.
User's Guide Solving Problems When You Cannot Make Network Settings ❏ Turn off the devices you want to connect to the network. Wait for about 10 seconds, and then turn on the devices in the following order; access point, computer or smart device, and then printer. Move the printer and computer or smart device closer to the access point to help with radio wave communication, and then try to make network settings again. ❏ Press the button to print the network connection report.
User's Guide Solving Problems ❏ You may not be able to connect to the access point when the access point has multiple SSIDs and devices are connected to different SSIDs on the same access point. Connect the computer or smart device to the same SSID as the printer. ❏ An access point that is compliant with both IEEE802.11a and IEEE802.11g has SSIDs of 2.4 GHz and 5 GHz.
User's Guide Solving Problems Related Information & “Checking the SSID Connected to the Printer” on page 122 & “Checking the SSID for the Computer” on page 123 When You Cannot Connect Using Wi-Fi Direct (Simple AP) Connection If four devices have already been connected, you cannot connect any more devices. See the following and try to reconnect. Check how many devices are connected Check how many devices are connected to the printer.
User's Guide Solving Problems ❏ Product status screen for Web Config Launch a web browser from the connected device, and then enter the IP address for Wi-Fi Direct (Simple AP) to open Web Config. Tap Product Status > Wi-Fi Direct and check the Wi-Fi Direct status. Disconnect unnecessary devices If four devices have already been connected to the printer, disconnect the unnecessary devices and try to connect the new device.
User's Guide Solving Problems Checking the SSID for the Computer Windows Click in the task tray on the desktop. Check the name of the connected SSID from the list displayed. Mac OS Click the Wi-Fi icon at the top of the computer screen. A list of SSIDs is displayed and the connected SSID is indicated with a check mark.
User's Guide Solving Problems Printout Problems Printout is Scuffed or Color is Missing If you have not used the printer for a long time, the print head nozzles may be clogged and ink drops may not be discharged. Perform a nozzle check, and then clean the print head if any of the print head nozzles are clogged. Related Information & “Checking and Cleaning the Print Head” on page 86 Banding or Unexpected Colors Appear The print head nozzles may be clogged.
User's Guide Solving Problems Related Information & “List of Paper Types” on page 34 & “Aligning the Print Head” on page 88 Blurry Prints, Vertical Banding, or Misalignment Align the print head. Related Information & “Aligning the Print Head” on page 88 Print Quality Does Not Improve Even After Aligning the Print Head During bidirectional (or high speed) printing, the print head prints while moving in both directions, and vertical lines may be misaligned.
User's Guide Solving Problems ❏ If the paper is curled or the envelope is puffed up, flatten it. ❏ Do not stack the paper immediately after printing. ❏ Dry the printouts completely before filing or displaying them. When drying the printouts, avoid direct sun light, do not use a dryer, and do not touch the printed side of paper. ❏ When printing images or photos, Epson recommends using genuine Epson paper rather than plain paper. Print on the printable side of the genuine Epson paper.
User's Guide Solving Problems ❏ Place the paper on a flat surface to check if it is curled. If it is, flatten it. ❏ When performing manual 2-sided printing, make sure that the ink is completely dry before reloading the paper. Related Information & “Loading Paper in the Rear Paper Feed” on page 34 & “Cleaning the Paper Path” on page 89 Printed Photos are Sticky You may be printing on the wrong side of the photo paper. Make sure you are printing on the printable side.
User's Guide Solving Problems Related Information & “Printing Basics - Windows” on page 40 & “Printing Basics - Mac OS” on page 41 Edges of the Image are Cropped During Borderless Printing During borderless printing, the image is slightly enlarged and the protruding area is cropped. Select a smaller enlargement setting. ❏ Windows Click Settings next to the Borderless checkbox on the printer driver's Main tab, and then change the settings.
User's Guide Solving Problems The Printed Image Is Inverted Clear any mirror image settings in the printer driver or the application. ❏ Windows Clear Mirror Image on the printer driver's More Options tab. ❏ Mac OS Clear Mirror Image from the print dialog's Print Settings menu. Mosaic-Like Patterns in the Prints When printing images or photos, print using high-resolution data. Images on websites are often low resolution although they look good enough on the display, and so print quality may decline.
User's Guide Solving Problems & “Installing Applications” on page 107 Other Printing Problems Printing Is Too Slow ❏ Close any unnecessary applications. ❏ Lower the quality setting. High quality printing slows down the printing speed. ❏ Enable the bidirectional (or high speed) setting. When this setting is enabled, the print head prints while moving in both directions, and the printing speed increases. ❏ Windows Select High Speed on the printer driver's More Options tab.
User's Guide Solving Problems Check whether or not the printer is recognized when using Windows In Windows, make sure the printer (scanner) is displayed in Scanner and Camera. The printer (scanner) should be displayed as "EPSON XXXXX (printer name)". If the printer (scanner) is not displayed, uninstall and then reinstall Epson Scan 2. See the following to access Scanner and Camera.
User's Guide Solving Problems ❏ Do not press with too much force on the original or the document cover. If you press with too much force, blurring, smudges, and spots may occur. Related Information & “Cleaning the Scanner Glass” on page 89 The Image Quality Is Rough ❏ Set the Mode in Epson Scan 2 according to the original you want to scan. Scan using the settings for documents in Document Mode, and the settings for photos in Photo Mode.
User's Guide Solving Problems Related Information & “Scanning Documents (Document Mode)” on page 62 Moiré Patterns (Web-Like Shadows) Appear If the original is a printed document, moiré patterns (web-like shadows) may appear in the scanned image. ❏ On the Advanced Settings tab in Epson Scan 2, set Descreening. ❏ Change the resolution, and then scan again.
User's Guide Solving Problems Text is Not Recognized Correctly when Saving as a Searchable PDF ❏ On the Image Format Options window in Epson Scan 2, check that Text Language is set correctly on the Text tab. ❏ Check that the original is placed straight. ❏ Use an original with clear text. Text recognition may decline for the following types of originals.
User's Guide Solving Problems Related Information & “Uninstalling Applications” on page 105 & “Installing Applications” on page 107 Other Scanning Problems Scanning Is Too Slow Lower the resolution. Related Information & “Scanning Using Epson Scan 2” on page 62 Scanning Stops when Scanning to PDF/Multi-TIFF ❏ When scanning using Epson Scan 2, you can continuously scan up to 999 pages in PDF format and up to 200 pages in Multi-TIFF format. ❏ When scanning large volumes, we recommend scanning in grayscale.
User's Guide Solving Problems ❏ Mac OS menu > Printers & Scanners (or Print & Scan, Print & Fax), and then Select System Preferences from the select the printer. Click Options & Supplies > Options (or Driver). Select On as the Quiet Mode setting. Application Is Blocked by a Firewall (for Windows Only) Add the application to the Windows Firewall allowed program in security settings on the Control Panel.
User's Guide Appendix Appendix Technical Specifications Printer Specifications Print Head Nozzle Placement Black ink nozzles: 180 Color ink nozzles: 59 for each color Weight of Paper* * Plain Paper 64 to 90 g/m2(17 to 24lb) Envelopes Envelope #10, DL, C6: 75 to 90 g/m2 (20 to 24 lb) Even when the paper thickness is within this range, the paper may not feed in the printer or the print quality may decline depending on the paper properties or quality.
User's Guide Appendix Printable Area for Envelopes Print quality may decline in the shaded areas due to the printer's mechanism. A 3.0 mm (0.12 in.) B 5.0 mm (0.20 in.) C 18.0 mm (0.71 in.) D 40.0 mm (1.57 in.) Scanner Specifications Scanner Type Flatbed Photoelectric Device CIS Maximum Document Size 216×297 mm (8.5×11.7 in.
User's Guide Appendix Network Function List Network Functions and IPv4/IPv6 Functions Network Printing Network Scanning Remarks EpsonNet Print (Windows) IPv4 ✓ - Standard TCP/IP (Windows) IPv4, IPv6 ✓ - WSD Printing (Windows) IPv4, IPv6 ✓ Windows Vista or later Bonjour Printing (Mac OS) IPv4, IPv6 ✓ - IPP Printing (Windows, Mac OS) IPv4, IPv6 - - UPnP Printing IPv4 - Information appliance PictBridge Printing (Wi-Fi) IPv4 - Digital camera Epson Connect (Email Print, Remote Pri
User's Guide Appendix *4 Wi-Fi Direct supports WPA2-PSK (AES) only. *5 Complies with WPA2 standards with support for WPA/WPA2 Personal. Security Protocol SSL/TLS HTTPS Server/Client Supported Third Party Services Google Cloud Print Dimensions Dimensions Storage ❏ Width: 390 mm (15.4 in.) ❏ Depth: 300 mm (11.8 in.) ❏ Height: 145 mm (5.7 in.) Printing ❏ Width: 390 mm (15.4 in.) ❏ Depth: 504 mm (19.8 in.) ❏ Height: 279 mm (11.0 in.) Weight* * Approx. 3.9 kg (8.
User's Guide Appendix Environmental Specifications Operation Use the printer within the range shown in the following graph. Temperature: 10 to 35°C (50 to 95°F) Humidity: 20 to 80% RH (without condensation) Storage Temperature: -20 to 40°C (-4 to 104°F)* Humidity: 5 to 85% RH (without condensation) * You can store for one month at 40°C (104°F). Environmental Specifications for Ink Cartridges Storage Temperature -30 to 40 °C (-22 to 104 °F)* Freezing Temperature -16 °C (3.
User's Guide Appendix Hereby, Seiko Epson Corporation declares that the following radio equipment model is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following website. http://www.epson.
User's Guide Appendix 1. Turn off the printer by pressing the P button. 2. Make sure the power light turns off, and then unplug the power cord. c Important: Unplug the power cord when the power light is off. Otherwise, the print head does not return to the home position causing the ink to dry, and printing may become impossible. 3. Disconnect all cables such as the power cord and USB cable. 4. Remove all of the paper from the printer. 5. Make sure there are no originals on the printer. 6.
User's Guide Appendix 8. Prepare to pack the printer as shown below. 9. Pack the printer in its box, using the protective materials. When you use the printer again, make sure you remove the tape securing the ink cartridge holder. If print quality has declined the next time you print, clean and align the print head.
User's Guide Appendix Epson support will be able to help you much more quickly if you give them the following information: ❏ Product serial number (The serial number label is usually on the back of the product.) ❏ Product model ❏ Product software version (Click About, Version Info, or a similar button in the product software.
