INDUCTION COOKTOP Model : BIC 304 Induction Model : BIC 365 Induction
installing incorrectly using solvents Mishandling e.g.
• This appliance is designed for built-in household use only. • Do no use outdoors • Do not use the appliance to heat a room. • Do not operate the cooktop with a damaged cord or if it malfunctions or has been damaged in any manner. • To protect against electric shock, do not immerse cord, or main body in water or any other liquid. • Do not let cord hang over edge of table or counter. • Do not allow cord to touch a hot surface. • Always attach plug to appliance first, then plug cord into the wall outlet.
3. Cutout dimensions of the countertop as indicated on the following pages.
4
5
: BIC 304 (Top) 4.5" (114) Min.: 29.56" (750) Max.: 29.68" (755) Min.: 19.87" (505) Max.: 20.06" (510) 2.5"min 4.
: BIC 365 (Top) 4.5" (114) Min.: 35.21" (895) Max.: 35.43" (900) Min.: 19.87" (505) Max.: 20.06" (510) 2.5"min 4.
2.75" 2.75" (70mm) Do . 5.
: BIC 304 1. Left rear burner 2. Left front burner 3. Right rear burner 4. Right front burner 5. Ceramic glass 6. Left rear burner control panel 7. Left front burner control panel 8. Right front burner control panel 9. Right rear burner control panel 10.
30” Model: BIC 304 Main Control Panel 4 1 3 2 5 1. Timer setting Down 2. Timer 3. Timer setting Up 4. Time Display 6 7 5. Stop/Go 6. Main power On/Off 7. Controls Lock Burner Control Panel 12 8 8. Decrease power 9. Increase power 10. Power Boost 9 10 11 11. Power On/Off 12.
: BIC 365 1. Left rear burner 2. Left front burner 3. Right rear burner 4. Right front burner 5. Center burner 6. Ceramic glass 7. Left rear burner control panel 8. Left front burner control panel 9. Center burner control panel 10. Right front burner control panel 11. Right rear burner control panel 12.
36” Model: BIC 365 Main Control Panel 4 1 3 2 5 1. Timer setting Down 2. Timer 3. Timer setting Up 6 4. Time Display 5. Main power On/Off 6. Controls Lock Burner Control Panel 7 8 10 11 9 7. Power Boost 8. Increase power 9. Power/Heat Display 12 10. Burner symbol 11. Decrease power 12.
BIC 304 BIC 365 30" x 21" x 2.12" 36" x 21" x 2.12" Min.: 29.56" x 19.87" Max.: 29.68" x 20.06" Min.: 35.21" x 19.87" Max.: 35.43" x 20.
Controls Lock and Power On Touch and Hold Lock key pad for 3 seconds, a beep will sound, the indicator light will turn OFF. Touch and Hold Lock key pad for 3 seconds, a “beep” will sound, the indicator light above the Lock Key pad will be lit up. Touch Minus (-) to start at low level. The power display with show 1. Touch Plus (+) to start at high level. The power display with show 9.
Four or five burners on the cooktop are divided into two separate cooking areas, the right and left zone/side burners share power of an inverter. Power sharing occurs when burners in the same area are activated. The controls adjust the power automatically for “Power Sharing”. Power Sharing Tips: Remember to select the power setting last for the burner you want to maintain at full setting heat.
: BIC 304 To turn On icon and active burners will blink. s icon burner is ON. Time digital display reads “00” and is blinking. Touch or to set the desired minutes. Once the Timer is set the countdown begins and the timer display will stop blinking and will stay on in the display. Once the Timer reaches “00”, a “beep” will be sound, indicating that the time is up and the burner will automatically shut off.
Check your cookware’s retail box for the induction symbol. To determine if your cookware is compatible with the induction technology, use a magnet and see if it holds to the bottom of the cookware. If your magnet stays on, then your cookware can be used on the induction cooktop! Optimally the cookware will have this induction image on the retail box: NOTE: Some cookware can produce noises when using induction cooking.
18
19
