Datasheet

Page 3/7
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 16.09.2017 Revision: 16.09.2017Version number 1
Trade name: ergo 4203
(Contd. of page 2)
45.2.31
Dispose of the material collected according to regulations.
-
6.4 Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 10 for information on "stability and reactivity".
See Section 13 for disposal information.
SECTION 7: Handling and storage
-
7.1 Precautions for safe handling
No special precautions are necessary if used correctly.
-
Information about fire - and explosion protection:
No special precautions are necessary if used and stored according to specifications.
-
7.2 Conditions for safe storage, including any incompatibilities
-
Storage:
-
Requirements to be met by storerooms and receptacles:
Store only in the original receptacle.
-
Information about storage in one common storage facility:
Not required.
-
Further information about storage conditions:
Store in cool, dry conditions in well sealed receptacles.
Protect from heat and direct sunlight.
Store receptacle in a well ventilated area.
-
Storage class (TRGS 510, Storage of hazardous substances in non-stationary containers):
10-13
-
7.3 Specific end use(s)
No further relevant information available.
SECTION 8: Exposure controls/personal protection
-
Additional information about design of technical facilities:
No further data; see item 7.
-
8.1 Control parameters
-
Ingredients with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored
at the workplace.
-
Additional information:
The lists valid during the making were used as basis.
-
8.2 Exposure controls
-
Personal protective equipment:
-
General protective and hygienic measures:
The usual precautionary measures are to be adhered to when handling chemicals.
Wash hands before breaks and at the end of work.
-
Respiratory protection:
Not required.
-
Protection of hands:
Protective gloves on prolonged contact with skin.
Check protective gloves prior to each use for their proper condition.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
-
Material of gloves
Find below a list of appropriate protective gloves for chemical surrounding:
.
Permeation time / penetration time: = 480 minutes (DIN EN 374):
Naturlatex I , Nr. 0395 oder 0403
Chloropren Nitril I, Nr. 0727
Nitril I, Nr. 0730, 0732, 0733, 0736, 0737, 0738, 0739 oder 0836
Viton, Nr. 0890
Butyl II, Nr. 0897
Butyl, Nr. 0898
.
Permeation time / penetration time: = 240 minutes (DIN EN 374):
(Contd. on page 4)
GBGEN