Quartex Informatica www.quartex.it Orderguide ® Flat Panel Monitor Mounting Solutions Maximize the effectiveness of Flat Panel Monitors Quartex Informatica Via Paolo Giovio n.5 20144 Milano tel 02 4984998 fax 02 4985894 e-mail: ergotron@quartex.it 870-03-005, rev.
.
Orderguide Flat Panel Monitor ARMS Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 How to Select ARMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Flat Panel ARMS Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . 4 5 ARMS Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 400 Series . . . . . . . . . . 300 Series . . . . . . . . . . 200 Series . . . . . . . . . .
Introduction lat panel monitors provide space-saving convenience. Ergotron’s Adjustable Rotating Mounting Solutions (ARMS) deliver this technology where you need it. Patented ARMS products instantly lift, swing, tilt and rotate for optimum ergonomic positioning without the need for knobs or adjustment levers. Our Paraview Technology allows multiple monitors to be attached to a single arm or stand. In short, ARMS increase work space while improving productivity.
Flat Panel ARMS Product Overview Monitor Suspension 400 Series 300 Series 200 Series 100 Series Surface Attachments Accessory Options Keyboard/Mouse Trays, Laptop Trays Wall Tracks Wrist Rests & Mouse Pads Wall Plates Extenders Slatwall Components Monitor Interface Accessories Command Posts CPU Holders & Storage Components FX Series Pole Mounts Ergotron Carts DS Series HD Series Desk Mounts Mobile WorkStand Furniture Mounts Mobile WorkCenter VL Series Direct Mounting HD Series Cart
ARMS Product Selection 400 Series The 400 Series provides up to 24 inches (610 mm) of vertical, sit-to-stand adjustability – enough to accommodate sitting and standing users at the same workstation! Provides smooth adjustment while maintaining touch-screen stability. Other features include: cable management that conceals and routes cables; internal steel construction; easy-to-clean plastic exterior.
45-003-xxx 400 Series Vertical Mount Arms Part Number 45-042-xxx 45-030-xxx 45-002-xxx 45-043-xxx Description Shipping Weight Monitor Mounts Weight Capacity 45-003-099, grey 45-003-085, black Fixed, Single Pivot 28 lbs (12.7 kg) 11 lbs (5 kg) 45-042-099, grey 45-042-085, black Fixed, Single Pivot w/ P/L 25 lbs (11.3 kg) 13 lbs (5.9 kg) 45-030-099, grey 45-030-085, black Fixed, Double Pivot w/ P/L 23 lbs (10.4 kg) 12 lbs (5.
400 Series Horizontal Mount Arms 45-012-xxx Attach above worksurface, countertop or other horizontal surface. Part Number 45-054-xxx Description Shipping Weight Monitor Mounts 45-016-xxx Weight Capacity 45-012-099, grey 45-012-085, black Single Pivot 28 lbs (12.7 kg) 12 lbs (5.5 kg) 45-054-099, grey 45-054-085, black Single Pivot w/ P/L 25 lbs (11.3 kg) 14 lbs (6.4 kg) 45-016-099, grey 45-016-085, black Double Pivot w/ P/L 23 lbs (10.4 kg) 15 lbs (6.8 kg) 7.5 lbs (3.4 kg) 13 lbs (5.
Photo Reference for 400 Series The 400 Series Arm with Keyboard/Laptop Pivot features 22 inches (559 mm) of vertical adjustability. Note the VESA FDMI monitor interface where the monitor attaches to the arm. Shown with optional Surface Clamp. A 400 Series Arm is teamed with an Extender to enhance placement capability. 400 Combo Arm mounted on Wall Track. 400 Series Arm suspended from a ceiling. 870-03-005 rev.
ARMS Product Selection 300 Series 300 Series Arms provide 16 to 20 inches (406 to 508 mm) of height adjustment. Extensions add telescopic motion for extension and retraction. The 300 Series features Pivot-ease® technology, which provides long-life monitor adjustment while maintaining touch-screen stability.
300 Series Pre-configurations – Vertical Mount 45-087-xxx Mount to vertical surface: directly to surface, Wall Plate, Wall Track, Pole Clamps, etc. See chart below. Part Number Description Weight Capacity Shipping Weight 45-087-180, grey 45-087-200, black Vertical Mount Arm 23 lbs (10.4 kg) 9 lbs (4.1 kg) 28-170-180, grey 28-170-200, black Vertical Mount Arm with 9" Extension 23 lbs (10.4 kg) 16 lbs (7.2 kg) 7.5 lbs (3.4 kg) 8 lbs (3.
300 Series – Individual Components 45-067-xxx Part Number Description 300 Arms 45-098-xxx 45-121-xxx Weight Capacity 45-067-180, grey 45-067-200, black 300 Arm 23 lbs (10.4 kg) 8 lbs (3.6 kg) 45-098-180, grey* 45-098-200, black* 300 Arm, Keyboard/Laptop Pivot 7.5 lbs (3.4 kg) 7 lbs (3.1 kg) Extensions 45-056-xxx 45-120-xxx Notes 45-121-180, grey 45-121-200, black 5" Extension Combine with other arms for telescopic motion** 5 lbs (2.
Photo Reference for 300 Series A 300 Series Arm with two 9" Extensions is mounted to a Command Post. This configuration can extend the keypad out over 30 inches. The top view of a cubicle where a 300 Series Arm with two 9" Extensions brings the monitor to point of use. A 300 Series Vertical Mount Arm clamped to a 2" round pole. A 300 Series Arm with one 9" Extension attached to Wall Mount Plate. A 300 Series Arm with 9" Extension is clamped to a worksurface. Rear view of a 300 Series Arm.
ARMS Product Selection 200 Series 200 Series products feature multiple points of rotation for extension and retraction motion. This sturdy, fixed-height solution can mount multiple monitors on a single arm. Interchangeable components allow you to customize a system to your exact needs.
200 Series Pre-configurations – Vertical Mount 28-106-xxx Mount to vertical surface: directly to surface, Wall Plate, Wall Track, Pole Clamps, etc. See chart below. Part Number 28-185-xxx Description Weight Capacity per Pivot Shipping Weight 28-106-180, grey 28-106-200, black Single Pivot w/ P/L 25 lbs (11.3 kg) 4 lbs (1.8 kg) 28-185-180, grey 28-185-200, black 6" Vertical Slide Pivot w/ P/L 25 lbs (11.3 kg) 6 lbs (2.
200 Series Pre-configurations – Pole Mount 28-296-xxx Attach directly to 1-1/2" diameter poles. 28-282-xxx 28-280-xxx 28-370-200 28-281-200 Part Number Description Weight Capacity per Pivot Shipping Weight 28-296-180, grey 28-296-200, black 7" Extension w/ Pole Clamp, 9" Extension, 6" Vertical Slide Pivot w/ P/L 25 lbs (11.3 kg) 14 lbs (6.3 kg) 28-282-180, grey 28-282-200, black 7" Extension w/ Pole Clamp, 5" Extension, 6" Vertical Slide Pivot w/ P/L 25 lbs (11.3 kg) 14 lbs (6.
200 Series Pre-configurations – Desk Mount 28-115-xxx 28-113-xxx 28-097-xxx Desk Mounts attach to worksurfaces with either the Desk Clamp or the Grommet Mount. Desk Clamps attach to the edge of worksurfaces ≤ 2-1/8" (54 mm) thick. Grommet Mounts attach through a hole in the worksurface 3/8" to 3" (10 to 76 mm) wide, up to 4" (102 mm) thick. Part Number Description Weight Capacity per Pivot Shipping Weight 28-113-180, grey 28-113-200, black 6" Vertical Slide Pivot w/ P/L 25 lbs (11.3 kg) 6 lbs (2.
200 Series – Individual Components (cont.) 45-120-xxx Part Number 45-137-xxx 45-136-xxx 45-124-xxx 60-409-xxx 97-195-xxx 28-320-xxx 60-324-xxx 60-374-xxx Description Extensions (continued from previous page) Attaches to… 45-120-180, grey 45-120-200, black 7" Extension w/ Pole Clamp 1-1/2" Round Pole (p.42) 6 lbs (2.7 kg) 45-137-180, grey 45-137-200, black 7" Extension w/ Pole Clamp w/ Pivot Interface 1-1/2" Round Pole (p.
Photo Reference for 200 Series The 200 Series features extension and retraction motion. 200 Combo Arm and CPU Holder attached to Wall Track. Vertical Mount 200 Series Single Pivot w/ P/L. Vertical Mount 200 Series 6" Vertical Slide Pivot. A triple-monitor configuration attached to slatwall using a 1-1/2" Round Pole and Slatwall Pole Clamp. 200 Series Desk Mount configuration. 870-03-005 rev.
ARMS Product Selection 100 Series 100 Pivots provide tilt and portrait/landscape adjustment. Mount them to most vertical surfaces. Their low profile is perfect for space-constrained areas.
ARMS Product Selection FX Series Fixed mounts (FX Series) allow flat panels to be hung like a picture. Once installed, monitors are held in place with touch-screen stability. This is a very low-profile mounting solution: monitors are held less than an inch from the wall. Attach the FX Series to most any vertical surface. Range of Motion None: The FX Series is a fixed mount solution.
ARMS Product Selection DS100 Series DeskStand 100 (DS100 Series) positions up to five monitors on a worksurface. Choose from three base options: Free Standing, Desk Clamp, or Grommet Mount. The DS100 Series utilizes Paraview Technology: view multiple monitors simultaneously, adjusting their position to a comfortable, ergonomically appropriate location.
DS100 Series – Pre-configurations Selections include Pivot(s), Free Standing Base, Pole and Crossbar(s) in one complete package. Standard color is black. 33-090-200 33-091-200 33-092-200 33-096-200 Part Number Description Weight Capacity per Pivot Shipping Weight 33-090-200, black Single Monitor Pre-configuration: 14" Pole, Clamping Double Pivot w/ P/L 23 lbs (10.
DS100 Series – Individual Components 33-262-200 60-349-200 60-350-200 Part Number 20-161-200 Bases Description Shipping Weight Attach to… 33-262-200, black Free Standing Base No attachment necessary 2 lbs (.9 kg) 60-349-200, black Desk Clamp Base Worksurface edge ≤ 2-1/8" (54 mm) thick 5 lbs (2.3 kg) 60-350-200, black Grommet Mount Base Worksurface through hole 3/8" to 3" (10 to 76 mm) wide, up to ≤ 4" (102 mm) thick 5 lbs (2.
Photo Reference for DS100 Series Rear view of a horizontal dual-monitor DS100 configuration. Cables are routed through the crossbar. A horizontal quad-monitor configuration – two bases support four monitors across a level plane while creating a viewing parabola with Ergotron's Paraview Technology. A dual-monitor vertical configuration provides full tilt adjustability. Close-up view of the Sliding Pivot on the Paraview bow.
ARMS Product Selection DS400 Series DeskStand 400 (DS400 Series) is a freestanding module that requires no bolting or clamping to a surface. It allows the user to easily adjust a flat panel monitor for maximum comfort and productivity. The sturdy construction is built to last, while its sleek design complements any desktop arrangement.
ARMS Product Selection HD Series HD Series Arms feature full adjustment capability, moving monitors and laptops through a 15" vertical range. The heavy-duty HD45 and Pivots accommodate heavier monitors than standard ARMS products. A laptop version provides a secure docking station. Attach the HD Series to virtually any vertical or horizontal surface.
HD Series – Arms Select the HD45 Arm for heavy monitors. The HD Dual-Monitor Arm holds two monitors. The HD Combo accommodates a flat panel and keyboard on the same arm. The HD Laptop Arm offers a secure docking station. Order a Base separately. 44-371-xxx Part Number Description Weight Capacity per Pivot Shipping Weight HD45 Arm (order Base separately, page 29) 20–xx lbs (9.1–xx kg) 9 lbs for “xx”, see chart below (4.
HD Series – Other Components Order a Base separately (except for HD Pivots, which include a Vertical Mount) to complement your HD Arm. Optional Extenders increase the reach of your HD Series Arm solution. 60-257-xxx Part Number Description Bases 33-269-xxx Attaches to… 60-257-180, grey* 60-257-200, black* Desk Clamp Horizontal surface at edge ≤ 3" (76 mm) thick 5 lbs (2.
ARMS Product Selection VL Series Vertical Lift ARMS (VL Series) are wall-mounted modules that allow quick positioning of a monitor and keyboard. When the keyboard is folded in the storage position and with the appropriate monitor selection, the total system depth can be as little as 4 inches (102 mm), making it the ideal solution for confined or high-traffic areas.
VL Series 1-1/2" + monitor depth The monitor and keyboard move up and down in tandem for ease of use. An optional Slide-Out Keyboard Tray allows the user to pull out the keyboard to a more comfortable position. The system’s smooth steel construction is both durable and easy to clean. A quick-connect interface makes monitor attachment/removal easy.
ARMS Product Selection MD Series Monitor Drawers (MD Series) securely integrate a flat panel monitor and/or keyboard into a 19" rack-mount or enclosure. Store your flat panel folded down horizontally, ready to be pulled out for viewing. Drawers require only 3U of rack space. The MD Series provides a rock-solid platform, even for monitors with touch-screen capability. Cables are safely routed through the integrated cable management system.
ARMS Product Selection Mobile WorkStand No matter how demanding the mobile computing application, or what type of computing equipment you need to mobilize, has a computer cart to get the job done. Mobile WorkStand integrates technology and convenience, allowing the user to move a computer system from room to room. It quickly adjusts to a sitting or standing user height, providing an ergonomically-correct work environment at all times.
Mobile WorkStand Base Units Choose from these pre-configured Base Units, then add optional peripherals and components as needed to complete your Mobile WorkStand. Part Number Description Shipping Weight 27-157-100, grey Mobile WorkStand Pre-configuration, Standard Base Unit Includes: Base, Casters, Pole, Handle, 400 Series Fixed Single Pivot Arm, 400 Series Fixed Keyboard/Laptop Pivot Arm, Mounting Brackets, Keyboard Tray with Sliding Mouse Tray & Wrist Rest Holder 50 lbs (22.
Configure Your Own Mobile WorkStand 90-015-100 20-080 Start with the basic components below. Then add peripherals and components listed on the previous page. Next, choose arms/pivots to mount your monitor, keyboard and/or laptop: 400, 300, 200 and 100 Series are compatible with Mobile WorkStand. Note: When selecting arms/pivots, consult an Representative to ensure proper configuration. Custom Pole lengths can also be ordered.
Other Carts Mobile WorkCenter: The Mobile WorkCenter is a complete workstation on wheels, with extra storage space for equipment, tools and supplies. Consult the Mobile WorkCenter Orderguide, 870-03-010, for ordering information. 13" (330 mm) Mobile WorkCenter Standing use only HD Series Cart: The HD Series Cart provides easy single-motion adjustment to place your computer where you need it with little effort. Consult the HD Series Cart Orderguide, 870-03-019, for ordering information.
Photo Reference for Carts Mobile WorkStands Mobile WorkStand shown in standing use position. Mobile WorkStand shown in sitting use position. Mobile WorkStand shown with Horizontal Dual-Monitor Crossbar. Mobile WorkCenter shown with 300 Series Desk Mount. Mobile WorkCenter shown with 6" adjustable Suspension Arm for CRTs. Mobile WorkCenter shown with Monitor Platform for CRTs. HD Series Cart – Flat Panel Configuration shown with Ergotron Power Supply at bottom.
Surface Attachment Options Direct Mounting 400, 300, 200, 100, VL, HD, and FX Series ARMS can mount directly to surfaces. Since applications vary, fasteners that attach ARMS to any surface should be supplied by the user. For direct-mount hole patterns, see pp. 54–57. Always consult the appropriate construction, engineering, or architectural personnel to ensure the product is mounted securely to handle applied loads.
Wall Tracks Wall Track provides a common interface for mounting multiple Ergotron components. When mounting components to Wall Track, you must order the appropriate Track Mount Bracket Kits. Peripherals for Wall Track can be found on pages 45–46. 31-016-182 31-017-182 31-018-182 Part Number Description Dimensions HxW Shipping Weight 31-016-182, silver 10" Wall Track 10" x 5" (254 x 127 mm) 2 lbs (.9 kg) 31-017-182, silver 26" Wall Track 26" x 5" (660 x 127 mm) 4 lbs (1.
Command Posts Command Post gives you the flexibility to mount one or more computer systems to a floor, bench, machine or ceiling – using little or no floor space. It is constructed from heavy-duty 11-gauge steel for long-lasting durability. Brackets are required to mount ARMS and peripherals to the Command Post. A Bracket Interface, which adapts the component to the standard bracket, is also required for the Vertical Lift and the Cable Box. Peripherals for Command Post can be found on pages 45–46.
Mounting Options and Uses Table Post Dimensions Base/Bracket Floor/Ceiling Wall/Bench/Machine Part Number HxWxD Part Number allowable configuration allowable configuration 20-142-100 48" x 2" x 2" 60-359-100/97-012-100 Arm, no Extender Arm w/ Extender 20-143-100 72" x 2" x 2" 60-359-100/97-012-100 Arm, no Extender Arm w/ Extender 20-075-100 48" x 3" x 3" 60-360-100/97-011-100 Arm(s) w/ Extender Arm(s) w/ Extender 20-076-100 80" x 3" x 3" 60-360-100/97-011-100 Arm(s) w/ Extender
Pole Mounts Attach equipment to 2", 1-3/4" or 1-1/2" Round Poles. Use your own pole or choose from the selection below. 60-131-003 Part Number Description 2" Pole-Mount Brackets 60-144-003 60-199-003 97-089 Shipping Weight Application 60-131-003, aluminum Pole-Mount Brackets (2 Brackets) 200, 300, 400 Series, HD Pivot, Extenders on vertical 2" Round Pole 2 lbs (.9 kg) 60-144-003, aluminum Pole-Mount Bracket CPU Holders, Wire Storage Basket on vertical 2" Round Pole 1 lbs (.
Slatwall Components Slatwall Brackets attach 400, 300, 200 and 100 Series to slatwall. Slatwall Pole Clamps support a 1-1/2" Round Pole, to which arms may be mounted. Order according to slatwall manufacturers. Standard color is black. Part Number Description Shipping Weight 60-271-009, black Woodtronics, Knoll, Infra-structure, Evans, Eurocraft, Teknion, Steelcase, EDP, CBA 2 lbs (.9 kg) 60-272-009, black Novalink 2 lbs (.9 kg) 60-274-009, black Wall Street Trading, LaCOUR 2 lbs (.
Accessory Selections Keyboard/Mouse Trays, Laptop Trays & Accessories Use in conjunction with 400, 300, 200 and 100 Series Keyboard/Laptop Arms and Pivots. Part Number Description Dimensions WxDxH Shipping Weight 77-049-100, grey 77-049-101, black Keyboard Tray 16-1/2" x 7-1/4" x 2" (420 x 185 x 51 mm) 3 lbs (1.4 kg) 77-050-100, grey 77-050-101, black Keyboard Tray w/ Sliding Mouse Tray & Wrist Rest Holder 17-1/2" x 9 to 12" x 2-1/2" (445 x 229 to 305 x 64 mm) 7 lbs (3.
Monitor Interface Accessories 60-244-007 60-243-007 97-197-200, converts 100 x 200 mm monitors into 75 x 75 mm or 100 x 100 mm hole pattern Attach your monitor to Ergotron ARMS with the Quick Mounting Kit – no tools necessary. The Quick Release Kit makes removal and reattachment of your monitor fast and easy. The Tamper Resistant Kit secures the lever of the Quick Release Kit.
Storage Components The CPU Cabinet is vented and lockable. The Wire Storage Basket and Cable Box add extra storage options to a configuration. 99-068-100 Part Number Description Dimensions HxWxD Shipping Weight 99-068-100, grey* Wire Storage Basket 6-1/8" x 13-1/8" x 4-1/8" (156 x 333 x 105 mm) 3 lbs (1.4 kg) 70-083-100, grey** Cable Box for Command Post 9-1/8" x 7-7/8" x 4-3/8" (231 x 201 x 112 mm) 3 lbs (1.
Monitor Interface & VESA® Standard Guide VESA® FDMI™ Standard The VESA® FDMI™ Standard* defines physical mounting interfaces, hole patterns, and associated cable and power supply location guidelines for flat panel monitors. ARMS are designed to fit this standard to make monitor attachment quick and easy. However, if your monitor is not VESA FDMI Standard compliant, a custom bracket may be available for your monitor.
Ergonomics Data & Mounting Heights Ergonomic Ground Rules – English Units To obtain optimum performance from a workstation, consider the following topics during installation of your Flat Panel ARMS: • The adjustment range of the ARMS product.
Ergonomics Data & Mounting Heights Ergonomic Ground Rules – Metric Units To obtain optimum performance from a workstation, consider the following topics during installation of your Flat Panel ARMS: • The adjustment range of the ARMS product.
Mounting Height Illustrations Numbers in the diagrams below can be cross-referenced with numbers in the Eye-Height / Elbow-Height Tables on the preceding pages. For more detailed information, consult our Ergonomic Mounting Heights Guide, literature # 888-99-014, which is included with each ARMS purchase.
Mounting Height Illustrations Numbers in the diagrams below can be cross-referenced with numbers in the Eye-Height / Elbow-Height Tables on the preceding pages. For more detailed information, consult our Ergonomic Mounting Heights Guide, literature # 888-99-014, which is included with each ARMS purchase.
Technical Specifications Weight Capacity TABLE A: Weight Capacity When Adding Extensions Weight capacities for ARMS products should be regarded as general guidelines only. Several variables can effect weight capacity, so capacity may vary between applications. Where weight range is shown (e.g. 5–30 lbs), the lower end of the range represents minimum weight required for proper function.
Technical Specifications Weight Capacity Weight capacities for ARMS products should be regarded as general guidelines only. Several variables can effect weight capacity, so capacity may vary between applications. Where weight range is shown (e.g. 5–30 lbs), the lower end of the range represents minimum weight required for proper function. FX Series TABLE C: Center-of-Gravity Affects Weight Capacity When using HD45 Arms or HD Pivots use the following table to determine weight capacity.
Interface Dimensions for Direct Mounting Note: Surface construction varies. It is recommended that you consult the appropriate architectural, engineering or construction personnel to ensure ARMS are properly mounted to handle the applied loads. 400 SERIES 400 Series Horizontal Mount Surface/Suspend Arm Interface 400 Series Vertical Mount Rotate Arm Interface (includes Combination Rotate Arm) 400 Series Vertical Mount Fixed Arm Interface (includes Combination Fixed Arm) 1.125" (28.6 mm) 5" (127.
Interface Dimensions for Direct Mounting Note: Surface construction varies. It is recommended that you consult the appropriate architectural, engineering or construction personnel to ensure ARMS are properly mounted to handle the applied loads. 100 SERIES 100 Series Single Pivot & Single Pivot w/ P/L Interface 100 Series Double Pivot & Double Pivot w/ P/L Interface ø .188" ø .188" (4.8 mm) Slotted (4.8 mm) 1.735" 1.75" (44.1 mm) (44.5 mm) 1.063" 1.063" (26.9 mm) (26.9 mm) 1.063" 1.063" (26.
Interface Dimensions for Direct Mounting Note: Surface construction varies. It is recommended that you consult the appropriate architectural, engineering or construction personnel to ensure ARMS are properly mounted to handle the applied loads. WALL MOUNT PLATE WALL TRACK Wall Mount Plate Hole Pattern Wall Track Hole Pattern 3-1/2" 5" (127 mm) (89 mm) ø.281" .87" (22 mm) Outline of an attached Vertical Mount (7.
Interface Dimensions for Direct Mounting Note: Surface construction varies. It is recommended that you consult the appropriate architectural, engineering or construction personnel to ensure ARMS are properly mounted to handle the applied loads. EXTENDER – 400 SERIES EXTENDER – HD SERIES Extender for 400 Series Hole Pattern Extender for HD Series Hole Pattern 1.125" (28.6 mm) 3.27" (83 mm) 1" (25 mm) 4.5" 5.035" (114 mm) (127.9 mm) .42" Ø (11 mm) .94" (24 mm) 1.38" (35 mm) Ø .203" (5.
Product Dimensions 400 SERIES 14-1/4" 14-1/8" 14-5/8" (362 mm) (358 mm) (371 mm) 15" (382 mm) 16-3/8" 14-7/8" (416 mm) (379 mm) 17" 16-7/8" (433 mm) (429 mm) 6-5/8" (168 mm) Side View Maximum Extension 14-7/8" (378 mm) 16" 14-3/8" (408 mm) 4-3/4" 14-5/8" (365 mm) (121 mm) (385 mm) 8-3/8" (212 mm) 16-7/8" (428 mm) Side View Maximum Extension 15-3/8" (391 mm) 14-1/8" (358 mm) 18-7/8" 16-3/8" (479 mm) (416 mm) 6-5/8" (169 mm) 3.88" (98.5 mm) .461" 2.95" (11.
Product Dimensions 300 SERIES 11-1/2" (292 mm) 9" 1-7/8" 1-7/8" (48 mm) (48 mm) (292 mm) 9" 11-1/2" (229 mm) 9" (229 mm) (229 mm) 1-7/8" (48 mm) 11-1/2" (292 mm) 8" 4-1/2" (203 mm) (114 mm) 5-3/4" 25-1/4" 34" (146 mm) 43" (834 mm) (641 mm) (1092 mm) 3-3/4" (96 mm) 10-3/8" 10-3/8" 10-3/8" 1-7/8" (263 mm) (48 mm) (264 mm) 9" 4-1/4" (108 mm) 1-7/8" 1-7/8" (48 mm) 9" 4-1/4" 9" (108 mm) (229 mm) 4-1/4" (108 mm) (229 mm) (229 mm) 1-7/8" (48 mm) (48 mm) 11-1/2" 8" 4
Product Dimensions 200 SERIES 9" (229 mm) 5" 7-1/4" 6-1/8" (127 mm) (183 mm) (156 mm) 3-3/8" 3-3/8" 3-3/8" (86 mm) (86 mm) (86 mm) 21-3/4" 3-1/2" (552 mm) (89 mm) 9" 9" (229 mm) (229 mm) 9" 6" 1-7/8" (153 mm) (48 mm) (229 mm) 9" 16-7/8" to 15" (229 mm) (427 to 381 mm) 1" (25 mm) 6-3/4" (171 mm) 23-1/2" 9" (229 mm) (229 mm) 19-1/4" (505 mm) (489 mm) 9" (229 mm) 25" (597 mm) 9" 19-7/8" (635 mm) 3-1/4" (83 mm) 9" 9" (229 mm) (229 mm) 3-1/4" (83 mm) 1-7/8" (48
Product Dimensions 100 SERIES 2-3/8" 3-3/8" 4-5/8" 5-3/8" (60 mm) (85 mm) (117 mm) (137 mm) 2" 2" 2" 2" (51 mm) (51 mm) (51 mm) (51 mm) 2-3/4" (70 mm) 2" (51 mm) 3" (76 mm) FX SERIES Wall Bracket Monitor Bracket Adapter Plate 75 mm to 100 mm .221" 3.94" (6 mm) Dia. x4 (100 mm) 2.95" (75 mm) .203" (5 mm) Dia. x4 3.94" .203" (100 mm) (5 mm) Dia. x4 2.95" 4" 3.94" (75 mm) (102 mm) (100 mm) (Attaches to a 75 mm VESA® FDMI™ Monitor) 4.5" 4.5" (114 mm) (114 mm) 4.
Product Dimensions DS100 SERIES X 1-1/2" (38 mm) Single Pivot; X = 2-3/4" (70 mm) Single Pivot with P/L; X = 3-5/8" (92 mm) 14-1/4" to 36-1/4" Double Pivot; X = 5-1/8" (130 mm) (362 to 921 mm) Double Pivot with P/L; X = 6" (152 mm) 12-3/8" (314 mm) 12" 12-3/8" (305 mm) (314 mm) 28" (711 mm) 12-1/4" (310 mm) 26" (660 mm) 55" 46" (1397 mm) (1168 mm) 29-1/8" 29-1/8" (741 mm) (741 mm) 52" 43-1/2" (1321 mm) (1104 mm) Available Monitor Widths Using Crossbars Attention: Listed allowable wi
Product Dimensions HD SERIES 5-1/4" 14-3/8" 4-1/8" (366 mm) (105 mm) 28-274-000 (133 mm) 7-1/4" (183 mm) 4" 45-142-000 (102 mm) HD Pivots 10-3/8" (265 mm) 4-1/8" 11-7/8" 4-5/8" (105 mm) (301 mm) (118 mm) 5-1/2" 7-1/4" (139 mm) (183 mm) 45-144-000 45-143-000 17" (432 mm) 8-1/8" (208 mm) HD45 Arm 13-1/8" (333 mm) 21" 18-1/2" (533 mm) (470 mm) 1-7/8" (22 mm) 16-7/8" 15" HD Combo (427 mm) (381 mm) 15" (381 mm) 17-1/2" 19-1/4" (445 mm) (490 mm) 13-1/2" (343 mm) 20-1/4"
Sample Configurations Configure your own system with Ergotron’s modular components. Examples listed here are some configuration ideas. 8 A. A.
C.
Notes 66 • ARMS Orderguide • rev.
Notes 870-03-005 rev.
Maximize the effectiveness of your computer systems with Products. ince 1982, Ergotron has designed and engineered products specifically for improving the human interface with computers. Innovative engineering concepts incorporate the human factor into each and every product. With our patented Monitor Suspension technology as the core, Ergotron designs Computer Mounting Solutions that consistently meet the ever changing needs of our customers.