User`s guide

ManualsBrandsErgotron ManualsIndoor FurnishingNeo-Flex Mobile MediaCenter VHD

1 of 12

Neo-Flex Mobile Media Center, VHD

with 90˚ Portrait/Landscape rotation

14mm

15mm

13mm

VHD: 50 - 90 lbs

(22.7 - 40.8 kg)

<30 lbs

(15 kg)

<5 lbs

(2.2 kg)

20"

(510 mm)

-15˚

+5˚

90˚

888-24-081-M-01 rev. D • 02/11

User's Guide

Guía del usuario

Manuel de l’utilisateur

WARNING

Stored Energy Hazard: The lift mechanism in the tower is under tension and will move up

rapidly, on its own, as soon as attached equipment is removed. For this reason, DO NOT remove

equipment or make adjustments to lift tension unless the front assembly has been moved to the

highest position on the tower! Failure to follow this instruction may result in serious personal

injury and/or equipment damage!

ADVERTENCIA

Riesgo de energía almacenada: El mecanismo de elevación de la torre está bajo tensión y se

moverá rápidamente hacia arriba por sí solo si se retira el equipamiento que hay conectado

al mismo. Es por ello que NO deberá quitar equipamiento ni hacer ajustes en la tensión de

elevación a menos que la estructura delantera se haya movido antes hacia la posición más alta de

la torre. No seguir estas instrucciones podría provocar daños personales y/o materiales graves.

AVERTISSEMENT

Danger: Le mécanisme d’élévation dans la tour est sous tension et se lève rapidement, tout

seul, dès que le matériel est retiré. Pour cette raison, NE PAS retirer votre matériel ou faire des

ajustemensts à la tension d’élévation à moins que la partie avant n’ait été mise à la position la

plus élevée de la tour! Risque de blessure corporelle ou d’endommagement matériel en cas de

non respect de cette instruction.

Summary of content (12 pages)

PAGE 1
Neo-Flex Mobile Media Center, VHD with 90˚ Portrait/Landscape rotation User's Guide Guía del usuario Manuel de l’utilisateur -15˚ 90˚ +5˚ 20" (510 mm) WARNING Stored Energy Hazard: The lift mechanism in the tower is under tension and will move up rapidly, on its own, as soon as attached equipment is removed.
PAGE 2
A B Leg Mounting Hardware 1x 1x 4x 1 1x 1x 1x 2 Leg Cover Mounting Screws M3.5 x 6mm 1x 8x Shelf Mounting Hardware 1x 3 4x M10 x 60mm 8x 4x M3 x 37mm 2x TM Mounting Hardware 1x 1x 2x 4x 4 2x 1x M6x8mm 4x 4x 2x M8 x 14mm M4 x 16mm 400mm Extension Hardware 2x 5 4x 4x 4x 5.1(ID) x 10(OD) x 6mm 4x M5 x 16mm Large Display Cart Hardware m 5.1(ID) x 10(OD) x 12m 4x m 8.1(ID) x 16(OD) x 12m 4x 6 M6x20mm 4x 8.1(ID) x 16(OD) x 6mm 4x 4x 5.
PAGE 3
1a 1x 1x Shipping Box Caja de embalaje Boîte d'expédition 15mm b Leg Mounting Hardware 4x 4x 2 1x 1x Leg Cover Mounting Screws 1x 8x M3.5 x 6mm CAUTION: DO NOT overtighten fasteners. Overtightening may cause damage to your equipment. Cuidado:: No sobreapriete los tornilllos, pues podría causar un daño al equipo. Attention: ne forcez pas le serrage de la vis, cela pourrait endommager l’écran et/ou les attaches. 888-24-081-M-01 rev.
PAGE 4
3a Shelf Mounting Hardware 2x 2x M3 x 37mm b c Shelf Mounting Hardware 2x 2x M3 x 37mm 6x 2x 4a TM Mounting Hardware b TM Mounting Hardware 4x 2x 4x 4x M6x8mm M8 x 14mm 13mm 888-24-081-M-01 rev.
PAGE 5
6 100 mm 100 mm 6 of 12 200 mm 300 mm 400 mm 500 mm 600 mm 600 mm 500 mm 400mm Extension Hardware 400 mm 4x 300 mm 200 mm M5 x 16mm 4x 888-24-081-M-01 rev.
PAGE 6
FIND APPROPRIATE FASTENERS FOR YOUR DISPLAY: BUSQUE ABRAZADERAS APROPIADAS PARA LA PANTALLA: TROUVEZ LES FIXATIONS APPROPRIÉES À VOTRE ÉCRAN : Large Display Cart Hardware 4x 5.1(ID) x 10(OD) x 6mm 4x M4x20mm 4x 4x 4x M6x20mm 8.1(ID) x 16(OD) x 6mm M4x40mm 4x 4x 5.1(ID) x 10(OD) x 18mm 4x M6x45mm M5x20mm 4x 8.1(ID) x 16(OD) x 24mm 4x 4x M5x40mm M8x25mm 4x m 5.1(ID) x 10(OD) x 12m 4x 4x 8x M8x50mm m 8.1(ID) x 16(OD) x 12m 4x 5.3(ID) x 16(OD) x 1.0mm 6.3(ID) x 14(OD) x 1.
PAGE 7
a b 100x100mm VESA Plate Hardware 4x 100 mm M5 x 10mm 100 mm Use fastener chosen from Step 6. Utilice la abrazadera elegida en el paso 6. Utilisez la fixation choisie au cours de l’étape 6. 200 mm 300 mm 400 mm 500 mm 600 mm Use fastener chosen from Step 6. Utilice la abrazadera elegida en el paso 6. Utilisez la fixation choisie au cours de l’étape 6.
PAGE 8
TM Mounting Hardware 8a 9 b 2x M4 x 16mm It is important that you adjust this product according to the weight of the mounted equipment as described in the following steps. Any time equipment is added or removed from this product, resulting in a change in the weight of the mounted load, you should repeat these adjustment steps to ensure safe and optimum operation. Adjustments should move smoothly and easily through the full range of motion and stay where you set it.
PAGE 9
10 TM Mounting Hardware 1x 90˚ a b 888-24-081-M-01 rev.
PAGE 10
11a Power Strip Hardware 2x b 2x M5x9mm c Cable Management Support Hardware 2x d 12 Cable Management Support Hardware a 1x b 1x M5x8mm 888-24-081-M-01 rev.
PAGE 11
c Cable Management Support Hardware 4x 2x NOTE: Leave enough slack in cables to allow full range of motion. No deje el cable excesivamente tenso Laisser du mou dans le câble d Top Cap Hardware 1x 1x M5x8mm 1x 9.8" 16.8" 3.69” (427 mm) (93.7 mm) (250 mm) 38.4"-58.4" (974 - 1484 mm) 29.4" 4.9" (746 mm) (124 mm) 17" (432 mm) 64" (1633 mm) 22" 23.6” (600 mm) 19.68” (500 mm) 15.7” (400 mm) 11.81” (300 mm) 7.87” (200 mm) (559 mm) 42" (1067 mm) 9.8" (249 mm) 3.94” 15.
PAGE 12
WARNING CAUTION STORED ENERGY HAZARD! DO NOT OPEN TOWER OR REMOVE SAFETY GUARD! A primary mechanism within the tower is under tension and can be hazardous to people exposed to it under certain extreme conditions. DO NOT open the tower; DO NOT attempt to service the cart/stand. DO NOT remove safety guards or labels designed to protect or inform of possible hazards. Only Ergotron-approved installers may service or otherwise modify cart/stand.