User guide

Introduction
1.1 Terminology
In this Reference Guide, the following definitions apply:
• MX8400 or MX8400 Multiplexer refers to the product MX8400 MPEG
Video/Audio/Data Multiplexer;
• Multiplexer refers to a single multiplexing engine within the MX8400 which
provides a single multi-program transport stream (MPTS) output.
1.2 Scope of this Guide
1.2.1 Who Should Use this Guide
This guide is written for operators and users of the MX8400 MPEG
Video/Audio/Data Multiplexer and describes its functions and operation. It will assist
in the installation and day-to-day care and operation of the unit. Maintenance
information that requires covers to be removed is not included.
Warning!
Do not remove the covers of this equipment. Hazardous voltages are present within
this equipment and may be exposed if the covers are removed. Only suitably trained
and experienced service engineers are permitted to service this equipment.
Caution!
Unauthorized maintenance or the use of non-approved replacements may affect the
equipment specification and invalidate any warranties.
1.2.2 What this Guide Describes
1.2.2.1 Identifying the Equipment
Figure 1.1 shows the front of the MX8400 MPEG Video/Audio/Data Multiplexer.
There are no controls or connectors at the front panel. However, the PSU (dual if
two are fitted) are accessed from the front panel.
2/1553-FGC 101 1014 Uen B
1-3