User guide

Technical Specification
B.2 MX8400 Multiplexer Parameters
B.2.1 Transport Stream Parameters
Table B.2 Transport Stream Parameters
Item Specification
Transport Stream
Standard
Generation of user required multi-program transport streams
conforming to the MPEG-2 transport layer specification (ISO/IEC
13818-1 MPEG-2 Systems.
Components
A maximum of 16384 components, used to create each
supported transport stream output, are supported across all
inputs.
Jitter
Each Transport Stream IP inputs removes up to ±60 ms of IP
jitter.
The Multiplexer minimizes the amount of inter-packet delay jitter
introduced to any component.
Header Information
Header information such as TTL, ToS and UDP port is
configurable on a stream level.
B.2.2 Ethernet Data Ports 1 – 4
Notes: The specification also relates to SFP Data Port GbE for ETHERNET DATA
ports 1 and 2.
If either SFP module is in use the corresponding RJ-45 connection is
unavailable.
Table B.3 GbE Port Specification
Item Specification
Safety status SELV
Connector
designations
ETHERNET DATA 1
ETHERNET DATA 2
ETHERNET DATA 3
ETHERNET DATA 4
Connector
The physical connector is RJ-45. There are four RJ-45
connectors, one per IP/GbE interface port. In addition to the
RJ-45 connections there is support for two SFP modules.
The SFP modules are usable by IP/GbE interfaces 1 and 2
only.
Scrambling
Clear and scrambled versions of the same transport stream
on two separate IP/GbE interface output ports.
2/1553-FGC 101 1014 Uen B
B-4