User guide

Conditional Access
D.4.3.6 EMM DVB Simulcrypt Injector Dialog Box: EMMG<-> MUX Conn. Tab
Table D.3 Set Up an EMM Generator (continued)
Step Action Result Comments
9
Click the EMM <-> MUX
Connections Tab
Enter the ClientID
An EMMG<-> MUX connection must be
defined for each mux. Each mux must have a
different Client ID. The Client IDs usually
starts from the superCASID and increment by
1 for each client. This field is in he x, so if you
have 10 muxes and each one has a separate
client ID, then the 10
th
mux will have a client
ID of 0x0500000a, not 0x05000010.
Enter the Channelid
10
Enter the Streamid
The CA vendor
supplies this
information.
Some vendors
specify a
different Client
ID for each
mux. In that
case, define
each mux
connection
separately.
Otherwise,
select “Any”
from the mux
drop-down list
and define one
connection for
all muxes.
11 Click OK
The configured
EMM Generator
is added to the
physical map
2/1553-FGC 101 1014 Uen B
D-12