User guide

Conditional Access
Figure D.12 ECM Dialog Box [Streams Tab]
D.7.1.4 ECM Dialog Box: Private Data Tab
Some CA vendors requires private data to go into CA descriptor in the PMT.
Usually SECA and Viaccess requires this. The CA vendor will advise on whether
this is necessary.
Note: SECA CA is sometimes referred to as Mediaguard, or Canal Plus, or Nagra
France.
Table D.7 Adding Service/Component Level ECMs (continued)
Step Action Result Comments
10 Click the Private Data tab
If using SECA CA scrambling,
ensure that User Private Data
check box is NOT selected
Select Vendor-mode edit to bring up the
SECA-specific configuration settings
11
If not using SECA CA
scrambling, and the CA
vendor requires private data,
ensure that User Private Data
check box is selected and
enter the HEX string manually.
The CA vendor specifies the private data
string
12 The CASID is in the range 0x0100 to 0x01FF
2/1553-FGC 101 1014 Uen B
D-22