User guide

Conditional Access

D.8.4 Creating a Clear Stream

The final step is to use nCC Profile Manager [nCC V 6.1] to set up the Multiplexer to

produce a cloned transport stream in the clear.

Secondary Outputs are used to tell nCompass to route a transport stream to a

number of other, optional outputs. This is often required to have the same content

distributed to QAM modulators for the cable service in addition to IP switches for a

simultaneous Broadband service.

It can also be used to add a clear version of a scrambled TS for monitoring

purposes on the MX8400 multiplexer. This will be an identical set of services in the

clear, but all ECM, EMM references and scrambling flags will be removed.

Note: This will use up an additional MX8400 TS license.

Table D.12 Simultaneous Scrambled and Clear Outputs

Step Action Result Comments

Select a Network in the Profile

View window and either:

click the right mouse button to

select Add Transport Stream

from the drop-down menu or

click the Add Transport

Stream command icon.

The Transport Stream

dialog box opens.

There are a number of tabs

Select the Secondary Outputs

tab

The Secondary Outputs

dialog box is displayed

See Figure D.19

Select Add/Remove to display

a list of Available, Selected,

and Clear

Select the required outputs and

click >> or << to move TS

between the lists

2/1553-FGC 101 1014 Uen B

D-30