User guide

BISS Support
J.3.3 Setting The Scrambling Method
Table J.2 Setting the Scrambling Method
Step Action Result Comments
1
In nCompass Control, Profile
Manager, locate the required profile to
configure.
2
Locate the component to be scrambled
in the chosen profile and right-click.
Displays a pop up
menu as shown in
Figure 3.
Figure J.3 Popup Menu For Component To Be Scrambled
Table J.2 Setting the Scrambling Method (continued)
Step Action Result Comments
3
Select the Properties option from the
pop up menu.
Displays a dialog box
as shown in Figure 4.
Select BISS Mode-1 from the
scrambling control.
To set BISS Mode-0 select
Off from the scrambling
control.
2/1553-FGC 101 1014 Uen B
J-7