User guide

Installing and Powering Up
2.2 Preliminary Checks
2.2.1 Mechanical Inspection
When taking delivery of an MX8400 Multiplexer, check the equipment items
delivered against the enclosed delivery note. Inspect the equipment for damage in
transit. If in doubt, contact Ericsson Customer Services (see Preliminary Pages).
Warning!
Do not remove the covers of this equipment. doing so may invalidate warranties,
cause a safety hazard or affect performance or both. Please check with Ericsson
Customer Services beforehand.
2.2.2 Moving the Equipment Safely
Do not place the MX8400 Multiplexer on an unstable cart,
stand, bracket, or table. The equipment may fall, causing
serious injury and serious damage to the equipment. Use only
with a cart, stand, bracket or table recommended by Ericsson.
An appliance and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the appliance and cart
combination to overturn.
Do not move or carry the equipment whilst it is still connected to the supply or
other leads, is live, or is in operation.
2.3 Installing the Equipment
2.3.1 Handling
The MX8400 Multiplexer must be handled carefully and thoughtfully to prevent
safety hazards and damage.
2.3.2 Installing the Equipment
Ensure all personnel designated to fit the unit have the appropriate skills and
knowledge. If in any doubt, contact Ericsson Customer Services (see Preliminary
Pages for contact details).
2/1553-FGC 101 1014 Uen B
2-6