User guide

Installing and Powering Up
Table 2.7 Static Parameters - Data Port Table
Name Description
IPAddress/Subnet Mask IP setting for each of the Ethernet IP port
Gateway Gateway setting is not currently supported
2.8.2.2 Data Port IO Mode
Data Port IO Mode: Value = TABLE. Click on the table to display a list of Card Nos
(actually corresponds to Slot numbers).
Figure 2.8 Static Parameters - Data IO Port Mode
Sets the data port input/output modes for the main card (Card Number 0) and for
each option card (Card Number 1 to 8) if appropriate.
2/1553-FGC 101 1014 Uen B
2-20