User guide

Installing and Powering Up

Table 2.10 Ethernet Input Reported Faults

Fault Fault Description

Missing PID 12345 SourceIP X.X.X.X DestinationIP

X.X.X.X Port X

PID missing (from IP

connection)

Missing TS SourceIP X.X.X.X DestinationIP X.X.X.X Port

Transport stream missing

Data Input Network Link Lost Link lost on data input

All Data Input Network Links Lost Link lost on all data inputs

2.9 ASI IN 1 and 2

2.9.1 Overview

2.9.1.1 Functional Description

These two connectors provide asynchronous serial interface (ASI)

transport stream inputs (in byte or packet burst mode). These two

data inputs are usable concurrently. A bit rate range of 1 – 72 Mbps

for byte mode and 1 – 213 Mbps for packet mode and 188/204 byte

operation on each input are supported.

2.9.1.2 Connectors

Table 2.11 ASI Input - Transport Stream Input (2 off)

Item Specification

Connector type

BNC 75 Ω

Connector designation ASI IN 1

ASI IN 2

Centre:

Shield:

Signal

Ground/Chassis

2.9.2 Alarm Indications

Each ASI IN connector has an associated indicator which displays the status of the

connector which is part of the active profile. In addition, MX8400 Phase 5 provides

monitoring of those ASI Input connections which are on the nCC Physical Map but

are not part of the active profile. Table 2.12 describes the meaning of the indication

states.

2/1553-FGC 101 1014 Uen B

2-22