User guide

Installing and Powering Up
Table 2.12 ASI IN Interface Indicators
ASI Inputs in Active Profile ASI Inputs on the nCC Physical Map but not in
Active Profile
State Indication State Indication
Off Not in use / Delayed Off Not in use
Green Locked, no errors
Flashing
Green
Link lock and transport stream lock
Red Unlocked or errors
Flashing
Red
No link lock or no transport stream lock
Alarms raised to nCC contain the slot and port numbers.
2.10 ASI OUT 1 to 4
2.10.1 Overview
2.10.1.1 Functional Description
These four connectors provide asynchronous serial interface (ASI)
outputs. The output is automatically set to byte mode burst mode
depending on bit rate and 188 / 204 packet size.
2.10.1.2 Connectors
Table 2.13 ASI Transport Stream Output (4 off)
Item Specification
Connector type
BNC 75 Ω
Connector
designations
ASI OUT 1
ASI OUT 2
ASI OUT 3
ASI OUT 4
Pin
Centre:
Shield:
Signal
Ground/Chassis
2.10.2 Alarm Indications
Each ASI Output connector has an associated indicator which displays the status of
the output stream. Table 2.14 describes the meaning of the indication states.
2/1553-FGC 101 1014 Uen B
2-23