User guide

Installing and Powering Up
Table 2.16 Ethernet CA 1 and 2 Interface Indicators
State Indication Comment
Left Indicator (as viewed from the connector side):
Off No active link
Green Full duplex link present Flashing for activity
Yellow Half duplex link present Flashing for activity
Right Indicator (as viewed from the connector side):
Off 10 Mbps
Green 100 Mbps
2.11.2 Static Parameters
2.11.2.1 Overview
Table 2.17 lists all the static parameters associated with the Conditional Access
function. See Chapter 3 and Annex D, for additional information relating to
Conditional Access.
Table 2.17 Static Parameters [CA]
Name Description Value
CA1 IP Address IP settings for CA port 1 10.1.101.6
CA 1 Subnet IP settings for CA port 1 255.255.255.0
CA2 IP Address IP settings for CA port 2 10.1.101.7
CA 2 Subnet IP settings for CA port 2 255.255.255.0
CA Float Address IP settings for the floating CA port 10.1.101.9
CA Float Subnet IP settings for the floating CA port 255.255.255.0
ECMGs See Figure 2.9 Table
emmg TCP Port EMMG TCP port number 0
emmg UDP Port EMMG UDP port number 0
pdg Port PDG port number 0
EIS Port EIS port number 0
ECMG connection timeout
Time before an inactive ECMG connection is
dropped
28
nominal CP duration Crypto Period time (in deciseconds) 0
connection test interval
Interval for EMMG/ECMG/EIS/SCS connection
test messages (in seconds)
30
2/1553-FGC 101 1014 Uen B
2-25